Allied Vision Alvium 1800 U-234m alternative from Hikrobot
Hikrobot replacement options for the Allied Vision Alvium 1800 U-234m: the closest models, what differs (resolution, frame rate, interface, sensor) and what to check before switching.
Comparison with Hikrobot models
Hikrobot MV-CS023-10UM matches the Alvium 1800 U-234m on resolution, frame rate and interface.
Check before ordering:
Frame height: 1200 instead of 1216 px (-1.32 %).
Frame width: 1920 instead of 1936 px (-0.83 %).
Software, SDK, connectors, mount and dimensions require a separate engineering check.
The lens mount differs: check the fit and the flange distance of your current lens.
With the same lens and working distance, on the full frame, the field of view changes: -0.83 % in width, -1.32 % in height. A smaller image circle is required — part of the field the existing lens covers goes unused.
To confirm a model for your line, send: current lens, working distance, field of view, object speed, cable length and software.
The search threshold is met, but this is not a replacement without trade-offs.
Trade-offs to settle before you choose:
The lens mount differs: check the fit and the flange distance of your current lens.
Frame height: 1200 instead of 1216 px (-1.32 %).
Frame width: 1920 instead of 1936 px (-0.83 %).
With the same lens and working distance, on the full frame, the field of view changes: -0.83 % in width, -1.32 % in height. A smaller image circle is required — part of the field the existing lens covers goes unused.
Other Allied Vision models with replacement options
Alvium 1800 U-234m specifications
The table scrolls to the right →
Specification
Competitor value
Resolution
1936 × 1216 px
Pixel size
5.86 × 5.86 µm
Sensor
Sony IMX249
Shutter type
Global
Mono/color
Monochrome
Spectral range
Visible range
Frame rate
40 fps
Interface
USB3 · 5 Gbit/s · USB Micro-B
Lens mount
C, CS
Specification sources
Manually checked: 2026-09-14
Scope of the comparison. The comparison covers only the specifications listed, taken from published sources. It is not a statement of compatibility or interchangeability. Third-party names and trademarks are used solely to identify the products being compared; the rights to them belong to their respective owners. Software, SDK, connectors, mount and dimensions require a separate engineering check.