Daheng Imaging ME2P-1230-9GC-P-HF8 alternative from Hikrobot
Hikrobot replacement options for the Daheng Imaging ME2P-1230-9GC-P-HF8: the closest models, what differs (resolution, frame rate, interface, sensor) and what to check before switching.
Comparison with Hikrobot models
Hikrobot MV-CH120-10GC V4.0 matches the ME2P-1230-9GC-P-HF8 on resolution, frame rate and interface.
Check before ordering:
Software, SDK, connectors, mount and dimensions require a separate engineering check.
The lens mount differs: check the fit and the flange distance of your current lens.
To confirm a model for your line, send: current lens, working distance, field of view, object speed, cable length and software.
The search threshold is met, but this is not a replacement without trade-offs.
Trade-offs to settle before you choose:
The lens mount differs: check the fit and the flange distance of your current lens.
Pixel size, X: 3.2 instead of 3.45 µm (-7.25 %); the field of view will change with the same lens.
Pixel size, Y: 3.2 instead of 3.45 µm (-7.25 %); the field of view will change with the same lens.
With the same lens and working distance, on the full frame, the field of view changes: -7.25 % in width, -5.02 % in height. A smaller image circle is required — part of the field the existing lens covers goes unused.
Other Daheng Imaging models with replacement options
ME2P-1230-9GC-P-HF8 specifications
The table scrolls to the right →
Specification
Competitor value
Resolution
4096 × 3000 px
Pixel size
3.45 × 3.45 µm
Sensor
Sony IMX304
Shutter type
Global
Mono/color
Color
Spectral range
Visible range
Frame rate
9 fps
Interface
GigE · 1 Gbit/s · RJ45 · PoE
Lens mount
C, CS
Specification sources
Manually checked: 2026-09-08
The spectral range is taken as visible: the manufacturer lists no variant of this model outside the visible range.
Scope of the comparison. The comparison covers only the specifications listed, taken from published sources. It is not a statement of compatibility or interchangeability. Third-party names and trademarks are used solely to identify the products being compared; the rights to them belong to their respective owners. Software, SDK, connectors, mount and dimensions require a separate engineering check.