Daheng Imaging ME2P-2621-15U3M alternative from Hikrobot
Hikrobot replacement options for the Daheng Imaging ME2P-2621-15U3M: the closest models, what differs (resolution, frame rate, interface, sensor) and what to check before switching.
Comparison with Hikrobot models
Hikrobot MV-CH250-90UM V4.0 matches the ME2P-2621-15U3M on resolution, frame rate and interface.
Check before ordering:
Frame rate: 14 instead of 15.1 fps (-7.28 %).
Software, SDK, connectors, mount and dimensions require a separate engineering check.
The lens mount differs: check the fit and the flange distance of your current lens.
To confirm a model for your line, send: current lens, working distance, field of view, object speed, cable length and software.
The model meets the preliminary matching criteria for the specifications we could check; the differences are listed below.
Trade-offs to settle before you choose:
The lens mount differs: check the fit and the flange distance of your current lens.
Frame rate: the stated 30 fps at 5120 × 5120 and 8 bit needs 6.29 Gbit/s. The 5 Gbit/s link allows at most 23.84 fps before overhead. Check the operating mode.
Other Daheng Imaging models with replacement options
ME2P-2621-15U3M specifications
The table scrolls to the right →
Specification
Competitor value
Resolution
5120 × 5120 px
Pixel size
2.5 × 2.5 µm
Sensor
Gpixel GMAX0505
Shutter type
Global
Mono/color
Monochrome
Spectral range
Visible range
Frame rate
15.1 fps
Interface
USB3 · 5 Gbit/s · USB3 Micro-B
Lens mount
C, CS
Specification sources
Manually checked: 2026-09-08
The spectral range is taken as visible: the manufacturer lists no variant of this model outside the visible range.
Scope of the comparison. The comparison covers only the specifications listed, taken from published sources. It is not a statement of compatibility or interchangeability. Third-party names and trademarks are used solely to identify the products being compared; the rights to them belong to their respective owners. Software, SDK, connectors, mount and dimensions require a separate engineering check.