Daheng Imaging MER2-630-60U3M-W90 alternative from Hikrobot
Hikrobot replacement options for the Daheng Imaging MER2-630-60U3M-W90: the closest models, what differs (resolution, frame rate, interface, sensor) and what to check before switching.
Comparison with Hikrobot models
Hikrobot MV-CS060-10UM V5.0 matches the MER2-630-60U3M-W90 on resolution, frame rate and interface.
Check before ordering:
Frame height: 2048 instead of 2064 px (-0.78 %).
Frame width: 3072 instead of 3088 px (-0.52 %).
Software, SDK, connectors, mount and dimensions require a separate engineering check.
The lens mount differs: check the fit and the flange distance of your current lens.
With the same lens and working distance, on the full frame, the field of view changes: -0.52 % in width, -0.78 % in height. A smaller image circle is required — part of the field the existing lens covers goes unused.
To confirm a model for your line, send: current lens, working distance, field of view, object speed, cable length and software.
The search threshold is met, but this is not a replacement without trade-offs.
Trade-offs to settle before you choose:
The lens mount differs: check the fit and the flange distance of your current lens.
Frame height: 2048 instead of 2064 px (-0.78 %).
Frame width: 3072 instead of 3088 px (-0.52 %).
With the same lens and working distance, on the full frame, the field of view changes: -0.52 % in width, -0.78 % in height. A smaller image circle is required — part of the field the existing lens covers goes unused.
The search threshold is met, but this is not a replacement without trade-offs.
Trade-offs to settle before you choose:
The lens mount differs: check the fit and the flange distance of your current lens.
Frame height: 2048 instead of 2064 px (-0.78 %).
Frame width: 3072 instead of 3088 px (-0.52 %).
With the same lens and working distance, on the full frame, the field of view changes: -0.52 % in width, -0.78 % in height. A smaller image circle is required — part of the field the existing lens covers goes unused.
The search threshold is met, but this is not a replacement without trade-offs.
Trade-offs to settle before you choose:
Connector: Type-C instead of USB3 Micro-B — the system has to be checked.
The lens mount differs: check the fit and the flange distance of your current lens.
Frame height: 2048 instead of 2064 px (-0.78 %).
Frame width: 3072 instead of 3088 px (-0.52 %).
With the same lens and working distance, on the full frame, the field of view changes: -0.52 % in width, -0.78 % in height. A smaller image circle is required — part of the field the existing lens covers goes unused.
The search threshold is met, but this is not a replacement without trade-offs.
Trade-offs to settle before you choose:
Frame rate: 59.6 instead of 60 fps (-0.67 %).
The lens mount differs: check the fit and the flange distance of your current lens.
Frame height: 2048 instead of 2064 px (-0.78 %).
Frame width: 3072 instead of 3088 px (-0.52 %).
With the same lens and working distance, on the full frame, the field of view changes: -0.52 % in width, -0.78 % in height. A smaller image circle is required — part of the field the existing lens covers goes unused.
Other Daheng Imaging models with replacement options
MER2-630-60U3M-W90 specifications
The table scrolls to the right →
Specification
Competitor value
Resolution
3088 × 2064 px
Pixel size
2.4 × 2.4 µm
Sensor
Sony IMX178
Shutter type
Rolling
Mono/color
Monochrome
Spectral range
Visible range
Frame rate
60 fps
Interface
USB3 · 5 Gbit/s · USB3 Micro-B
Lens mount
C, CS
Specification sources
Manually checked: 2026-09-08
The spectral range is taken as visible: the manufacturer lists no variant of this model outside the visible range.
Scope of the comparison. The comparison covers only the specifications listed, taken from published sources. It is not a statement of compatibility or interchangeability. Third-party names and trademarks are used solely to identify the products being compared; the rights to them belong to their respective owners. Software, SDK, connectors, mount and dimensions require a separate engineering check.