Zoom microscope system · MZS Series
Hikrobot MV-MZS200H-100（Kit）
- Warranty
- 36 months
Kit applications and tradeoffs
Smooth Full HD observation is the central role of MV-MZS200H-100（Kit）. Its color 1/2-inch CMOS sensor outputs 1920 × 1080 over HDMI at up to 60 fps, using 3.75 µm × 3.75 µm pixels and a rolling shutter. The system retains a C-mount optical interface and is presented as a microscope kit rather than only by a camera-head envelope.
The 60 fps maximum supports frequent visual updates while an operator positions a part or adjusts a tool. Geometry-sensitive capture should use a stationary subject or strobe-controlled exposure because the sensor has a rolling shutter. The assembly dimensions identify a 50 mm × 50 mm × 55.4 mm camera, Φ58 mm × 166.3 mm lens, Φ97 mm × 123.5 mm light source, 380 mm × 260 mm × 23 mm base, and Φ25 mm × 341 mm stand for bench-layout planning.
MV-MZS300H-100（Kit） increases output to 2560 × 1440 but its maximum rate is 30 fps, so it favours additional spatial sampling over refresh rate. MV-CM2020C-0H provides the same 1920 × 1080 resolution and 60 fps maximum and measures 50 mm × 50 mm × 55.4 mm. MV-MZS400H-101 is the step to 4096 × 3024 and 12.4 MP at 30 fps.
Specifications
| Product type | 2.1 MP HDMI Zoom Microscope System |
| Sensor type | CMOS, Rolling shutter |
| Sensor format | 1/2″ |
| Resolution | 1920 × 1080 |
| Pixel size | 3.75 µm × 3.75 µm |
| Maximum frame rate | 60 fps |
| Mono color | Color |
| Data interface | HDMI |
| Lens mount | C-mount |
| Dimensions | Camera: 50 mm × 50 mm × 55.4 mm (2.0″ × 2.0″ × 2.2″) Lens: Φ58 mm × 166.3 mm (2.3″ × 6.5″) Light source: Φ97 mm × 123.5 mm (3.8″ × 4.9″) Base: 380 mm × 260 mm × 23 mm (15.0″ × 10.2″× 0.9″) Stand: Φ25 mm × 341 mm (1.0″ × 13.4″) |
| Certification | KC |
Selection and applications
Full HD live microscope assembly work. 60 fps color bench observation. Kit-based inspection station layout.
Minimum kit: Use the MV-MZS200H-100（Kit） camera and C-mount optical assembly with an HDMI cable.
Nearby in the range: MV-MZS300H-100（Kit） — Choose it for 2560 × 1440 kit imaging when a 30 fps maximum is sufficient.; MV-CM2020C-0H — Choose it for the same Full HD, 60 fps values in the CM camera-head format.; MV-MZS400H-101 — Choose it when 12.4 MP resolution takes precedence over the 60 fps maximum..
FAQ
What viewing balance does MV-MZS200H-100（Kit） provide?
The system combines 1920 × 1080 color output with a maximum of 60 fps. Compared with the 30 fps MZS options, it prioritizes smoother live updates; compared with their 2560 × 1440 and 4096 × 3024 formats, it records fewer image samples.
Which kit dimensions matter when planning bench placement?
The listed assembly includes a 380 mm × 260 mm × 23 mm base and a Φ25 mm × 341 mm stand. It also identifies a Φ58 mm × 166.3 mm lens and Φ97 mm × 123.5 mm light source, so bench and vertical clearances can be checked from component dimensions.
What are the camera-head size and output connection in this kit?
The camera portion measures 50 mm × 50 mm × 55.4 mm, and its data interface is HDMI. Integration should leave room for that head, the C-mount optical connection, and the HDMI cable while respecting the stand geometry of the kit.
How should motion be handled with the 60 fps rolling-shutter sensor?
The 60 fps maximum provides rapid live updates, while the sensor itself uses a rolling shutter. If the observed part moves during exposure, test the intended speed and illumination because frame rate does not remove the geometric effects associated with rolling-shutter capture.
What lens coverage is appropriate for the MZS200H camera section?
The camera uses C-mount and a 1/2-inch sensor with 3.75 µm × 3.75 µm pixels. Any optical substitution or setup change should retain coverage for that sensor format, while the listed kit lens envelope is Φ58 mm × 166.3 mm.