Hikrobot MV-SC6250C-00C-NNN

Color inspection and system fit

A 4608 × 5120 color frame, 2.5 × 2.5 µm pixels and a 1.1-in CMOS sensor define this smart camera's emphasis on fine spatial detail. The global shutter holds the full frame to one exposure, while the 16 fps ceiling suits triggered inspection rather than very high line rates. Gigabit Ethernet carries images and results, and the C-mount provides the optical interface.

Large labels, multi-feature assemblies and broad parts can be inspected in one color view when 4608 × 5120 pixels are more important than rapid frame delivery. Exposure can be set from 16 µs to 1 sec to balance motion control and available light. Two opto-isolated inputs, two opto-isolated outputs and two configurable non-isolated I/O lines support triggers, status signals and direct machine coordination.

Within the lineup, MV-SC6250C-00C-NNN is the only 25 MP Color Smart Camera, so there is no like-for-like camera comparison. Select it when a color or Mono 8 output, 16 fps acquisition, a C-mount and onboard 16 GB memory with 64 GB storage match the inspection. Its 24 VDC supply, Gigabit Ethernet link and 17-pin M12 machine interface define the integration boundary.

Specifications

Selection and applications

Fine color inspection across a 4608 × 5120 field. Global-shutter capture of moving assemblies at up to 16 fps. Machine-result exchange over Gigabit Ethernet and industrial protocols.

Minimum kit: MV-SC6250C-00C-NNN, a C-mount lens, a Gigabit Ethernet cable, a 17-pin M12 power and I/O cable, and a 24 VDC supply form the minimum operating kit.

Cables and accessories for this model

Compatibility per manufacturer data.

Data cables

ID Ethernet, M12 8-pinSC cables, M12 17-pin

Power

Power

Optics

M12 lenses

Mounting

Camera mounts

All accessory families →

FAQ

What optical interface does MV-SC6250C-00C-NNN use for lens selection?

The camera uses a C-mount in front of a 1.1-in sensor with 2.5 × 2.5 µm pixels. Lens selection therefore has to cover the sensor format and preserve detail at that pixel pitch across the required field of view. The transparent lens cap is part of the listed configuration.

How does the shutter and exposure range affect inspections of moving parts?

A CMOS global shutter exposes the frame at one instant, which avoids the geometric skew associated with sequential line exposure on moving parts. The selectable exposure range is 16 µs to 1 sec, and the maximum full-frame acquisition rate is 16 fps.

Which connections carry image data, power and machine I/O on this camera?

Image communication uses Gigabit Ethernet at 1000 Mbit/s. A 17-pin M12 connection provides the machine I/O, including isolated and configurable channels, while the supply requirement is 24 VDC. The same extended connection also provides one VGA and one USB host port.

Which controller protocols can the smart camera use on an automation network?

The listed communication set includes TCP, UDP, Modbus, Serial Port, PROFINET, EtherNet/IP, Fins, MC and FTP. That range allows the camera's result and control traffic to be mapped to several common controller architectures without changing the 1000 Mbit/s image interface.

What environmental and power limits apply to MV-SC6250C-00C-NNN?

The working range is 0 to 50 °C and the storage range is -30 to 70 °C, with 20 to 95% RH when condensation is absent. Ingress protection is IP67 when the waterproof lens cap is installed correctly. Consumption is 15 W typical and 45 W maximum at 24 VDC.

Which pixel outputs and local memory resources are available for a job?

The color model provides Mono 8 and RGB 8 pixel formats. It also lists 16 GB of memory and 64 GB of storage, allowing image acquisition and local processing resources to be considered together when defining a smart-camera inspection sequence.