Lighting · Line scan
High-brightness line lights for line scan cameras
A narrow, intense stripe of light for line scan cameras: all the output is concentrated into a line about 17 mm wide so exposure holds up at line speed. Lengths from 100 to 2100 mm; long versions are dual-channel.
- Warranty
- 36 months

Specifications
| Operating temperature | 0 °C to 40°C |
| Illumination type | Line-Scan Light |
| Light source type | LED lamp beads |
| Input voltage | 48 VDC |
| Center illuminance | ≥ 1000K lux @ WD = 50 mm |
| Cooling mode | Fan cooling |
| Compatible controller | MV-LE201-200W48-2TD; MV-LE201-500W48-2TD; MV-LE201-750W48-2TD; MV-LE201-1200W48-2TD |
Part numbers and versions
| Part number | PN | Housing | Emitting area | Colour | Power | Cable | |
|---|---|---|---|---|---|---|---|
| MV-LTDS-H-100-W | 310101004 | 100 mm | 100 × 17 mm | White | 42 W | — | |
| MV-LTDS-150-W(C) | 365002351 | 150 mm | 150 × 17 mm | White | 20 W | 1.5 m | |
| MV-LTPS-150-W(C) | 365001231 | 150 mm | 140 × 15 mm | White | 20 W | 0.5 m | |
| MV-LTDS-H-200-W | 310101068 | 200 mm | 200 × 17 mm | White | 84 W | — | |
| MV-LTDS-300-W(C) | 365004041 | 300 mm | 300 × 17 mm | White | 40 W | 1.5 m | |
| MV-LTDS-H-300-W | 310101069 | 300 mm | 300 × 17 mm | White | 126 W | — | |
| MV-LTHS-300-W(C) | 365001177 | 300 mm | 300 × 17 mm | White | 108 W | 1.5 m | |
| MV-LTDS-H-400-W | 310101070 | 400 mm | 400 × 17 mm | White | 168 W | — | |
| MV-LTHS-450-W(C) | 365002554 | 450 mm | 450 × 17 mm | White | 162 W | 1.5 m | |
| MV-LTPS-450-W(C) | 365005432 | 450 mm | 442 × 17 mm | White | 58 W | 0.5 m | |
| MV-LTDS-H-500-W | 310100934 | 500 mm | 500 × 17 mm | White | 210 W | — | |
| MV-LTDS-H-600-W | 310101071 | 600 mm | 600 × 17 mm | White | 252 W | — | |
| MV-LTDS-H-700-W | 310101072 | 700 mm | 700 × 17 mm | White | 294 W | — | |
| MV-LTDS-750-W(C) | 365004709 | 750 mm | 750 × 17 mm | White | 96 W | 1.5 m | |
| MV-LTDS-H-800-W | 310101073 | 800 mm | 800 × 17 mm | White | 336 W | — | |
| MV-LTHS-800-W(C) | 310101324 | 800 mm | 800 × 17 mm | White | 276 W | 1.5 m | |
| MV-LTDS-H-900-W | 310101074 | 900 mm | 900 × 17 mm | White | 378 W | — | |
| MV-LTDS-H-1000-W | 310101005 | 1000 mm | 1000 × 17 mm | White | 420 W | — | |
| MV-LTDS-H-1100-W | 310101075 | 1100 mm | 1100 × 17 mm | White | 462 W | — | |
| MV-LTDS-H-1200-W | 310101076 | 1200 mm | 1200 × 17 mm | White | 504 W | — | |
| MV-LTDS-H-1300-W | 310101077 | 1300 mm | 1300 × 17 mm | White | 546 W | — | |
| MV-LTDS-H-1400-W | 310101078 | 1400 mm | 1400 × 17 mm | White | 588 W | — | |
| MV-LTDS-H-1500-W | 310101006 | 1500 mm | 1500 × 17 mm | White | 630 W | — | |
| MV-LTHS-1500-W(C) | 365002013 | 1500 mm | 1500 × 17 mm | White | 540 W | 1.5 m | |
| MV-LTHS-1950-W(C) | 365002686 | 1950 mm | 1950 × 17 mm | White | 702 W | 1.5 m | |
| MV-LTDS-2100-W(C) | 365004702 | 2100 mm | 2100 × 17 mm | White | 269 W | 1.5 m |
FAQ
Why is the illuminated stripe narrow on these line lights?
The output is concentrated into a line about 17 mm wide. That geometry is intended for line scan cameras and keeps illumination focused on the active scan band so exposure holds up at line speed.
What nominal length span can be covered by the category?
Listed line-light lengths run from 100 to 2100 mm. The range includes many intermediate designations, but not every family occurs at every length, so selection should be made from an exact model rather than from the overall endpoints alone.
Where does the MV-LTDS-H branch sit within the size range?
The branch begins with MV-LTDS-H-100-W and continues through numerous intermediate models to MV-LTDS-H-1500-W. No other listed family has as many successive nominal-length designations in this category.
Can matching nominal-length entries be treated as one configuration?
No. MV-LTDS-150-W(C) and MV-LTPS-150-W(C) carry different family designations. Their listed leads also differ: 1.5 m for the MV-LTDS entry and 0.5 m for the MV-LTPS entry. Compare the complete designation.
Which connection details need attention on longer line lights?
Long versions are dual-channel, so the channel arrangement belongs in the wiring and controller check. Where a lead is stated for a model, its value is 0.5 m or 1.5 m and should be included in the physical connection layout.