Area camera · CH Series
Hikrobot MV-CH2450-10Q1M-M72-TF
- Warranty
- 36 months
Applications and neighbours
Monochrome acquisition at 19200 × 12800 makes MV-CH2450-10Q1M-M72-TF the highest-resolution intensity camera in the lineup. The 245.8 MP Sony IMX811 uses a rolling shutter, a 64.84 mm format and 2.81 µm pixels. A single QSFP+ connection transfers Mono 8 at 12.4 fps. This set of properties serves detailed measurement and defect inspection over a very large stationary image area.
Large fixed panels, patterned substrates and broad surfaces can be recorded in one view without a Bayer color pattern. The target should remain stationary for the rolling-shutter capture or move in a controlled step-and-settle cycle. Exposure ranges from 142 µs to 30 sec, and TEC cooling is built into the 120 mm × 120 mm × 89 mm enclosure. A 12-pin P10 port supplies isolated timing I/O, bidirectional I/O and RS-232.
MV-CH2450-10Q1C-M72-TF matches the sensor, 19200 × 12800 frame, 12.4 fps rate and QSFP+ link but outputs Bayer RG 8 color and draws 19.9 W without TEC or 35.3 W with TEC. MV-CH2450-10YC-M72-TF also provides color at 12.4 fps, changing the interface to HDBNC CoaXPress and the enclosure to 100 mm × 100 mm × 82 mm. Select Q1M for monochrome QSFP+, Q1C for color on the same host path, or YC for a color CoaXPress integration.
Specifications
| Product type | 245.8 MP QSFP+ Area Scan Camera |
| Sensor type | CMOS, rolling shutter |
| Sensor model | Sony IMX811 |
| Sensor format | 64.84 mm |
| Resolution | 19200 × 12800 |
| Pixel size | 2.81 µm × 2.81 µm |
| Maximum frame rate | 12.4 fps @19200 × 12800 Mono 8 |
| Mono color | Mono |
| Dynamic range | 72.1 dB |
| Exposure time | 142 μs to 30 sec |
| Gain | 0 dB to 24 dB |
| Data interface | QSFP+ × 1 |
| Digital I/O | 12-pin P10 connector provides power and I/O, including opto-isolated input × 1 (Line 0), opto-isolated output × 1 (Line 1), bi-directional non-isolated I/O × 1 (Line 2), RS-232 × 1. |
| Lens mount | M72 × 0.75 |
| Power supply | 24 VDC |
| Power consumption | Non-TEC mode: Typ. 17.8 W @ 24 VDC TEC mode: Typ. 32.9 W @ 24 VDC |
| Ingress protection | IP40 (under proper lens installation and wiring) |
| Operating temperature | 0 °C to 50 °C (32 °F to 122 °F) |
| Storage temperature | –30 °C to 80 °C (–22 °F to 176 °F) |
| Humidity | 20% RH to 95% RH (no condensation) |
| Dimensions | 120 mm × 120 mm × 89 mm (4.7″ × 4.7″ × 3.5″) |
| Weight | Approx. 2.5 kg (5.5 lb.) |
| Certification | CE-EMC |
| Compatibility | XoFLink protocol, GenICam |
| Cooling | With TEC cooling |
Selection and applications
245.8 MP monochrome surface inspection. Large-area measurement of stationary targets. TEC-cooled Mono 8 capture through QSFP+.
Minimum setup: MV-CH2450-10Q1M-M72-TF, an M72 × 0.75 lens, a QSFP+ data cable, and a 24 V DC supply.
Nearby in the range: MV-CH2450-10Q1C-M72-TF — Prefer it for Bayer RG 8 color on the same 19200 × 12800 QSFP+ platform.; MV-CH1510-10XM-M72-TF V2.0 — Prefer it for 14192 × 10640 Mono 8 through DIN CoaXPress..
Cables and accessories for this model
Compatibility per manufacturer data.
- Data cables
- 10GigE
- I/O & power cables
- 12-pin IO
- Power
- Power
- Mounting
- Camera mounts
FAQ
Why select MV-CH2450-10Q1M-M72-TF for intensity inspection?
It outputs Mono 8 over a 19200 × 12800 image area, using every frame for monochrome intensity information rather than Bayer RG 8 color. The Sony IMX811 provides 245.8 MP at 12.4 fps with a 2.81 µm pixel pitch.
What host link does the monochrome Q1M camera require?
The data interface is one QSFP+ port, with XoFLink protocol and GenlCam stated for the camera. That connection carries 19200 × 12800 Mono 8 frames at rates up to the specified 12.4 fps.
Can MV-CH2450-10Q1M-M72-TF image a continuously moving web?
Its Sony IMX811 uses a rolling shutter, so continuous motion can change position during frame readout. Stationary presentation or an indexed step-and-settle sequence is the direct operating match for geometrically stable 19200 × 12800 images.
What are the Q1M power figures with and without TEC?
At 24 V DC, typical consumption is 17.8 W in non-TEC mode and 32.9 W in TEC mode. TEC cooling is built into the enclosure, and the camera measures 120 mm × 120 mm × 89 mm with an approximate mass of 2.5 kg.
What optics interface is fitted to MV-CH2450-10Q1M-M72-TF?
An M72 × 0.75 mount serves the 64.84 mm Sony IMX811 format. The optical system must cover that area while resolving 2.81 µm pixels throughout the 19200 × 12800 image area.