Hikrobot MV-CH500-90TC-M58S-NF

Fifty-megapixel colour range position

A nearly square 7008 × 7000 Gpixel GMAX sensor gives MV-CH500-90TC-M58S-NF 50 MP colour acquisition at 15.5 fps. The 22.4 mm × 22.4 mm CMOS array uses 3.2 µm pixels and global shutter, sending the image over 10 Gigabit Ethernet at 10000 Mbit/s. This balance serves broad, symmetric fields that need fine colour detail without motion-induced row skew.

Suitable tasks include colour inspection of large square parts, panel registration, moving-surface defect mapping, and dense component-array verification. Exposure spans 15 µs to 10 sec, and the fan-equipped M58*0.75 body supports synchronized capture through isolated P10 trigger and output lines. The lens interface has an 11.48 mm flange-back length and must cover the square sensor format.

MV-CH310-10TC-M58S-NN offers 6464 × 4852 colour at a slightly higher 17.2 fps and also uses global shutter. MV-CH800-60TC-M58S-NN raises colour resolution to 10304 × 7712 at 15 fps but changes to rolling shutter. MV-CH250-90TC-C-NF reaches 41.5 fps with a smaller 5120 x 5120 field and C-mount.

Available versions

One device, different revisions. We ship the current one by default; if a specific revision is already installed on your line, name it in the request and we will match it.

Documents

Selection and applications

Large square-part colour inspection. Global-shutter panel registration. Dense component-array verification.

Minimum kit: The minimum setup is MV-CH500-90TC-M58S-NF, an M58*0.75 lens covering 22.4 mm × 22.4 mm, a 10 Gigabit Ethernet cable and host interface, and a 9 V DC to 24 V DC supply.

Nearby in the range: MV-CH310-10TC-M58S-NN — Prefer it for 6464 × 4852 colour at 17.2 fps with global shutter; MV-CH800-60TC-M58S-NN — Prefer it for 10304 × 7712 colour capture at 15 fps when rolling shutter is acceptable; MV-CH250-90TC-C-NF — Prefer it for 41.5 fps colour acquisition at 5120 x 5120 with C-mount.

Cables and accessories for this model

Compatibility per manufacturer data.

Power

Power

Mounting

Camera mounts

All accessory families →

FAQ

What is gained from the nearly square 7008 × 7000 raster?

The camera samples a 22.4 mm × 22.4 mm field almost equally in both axes. This supports square parts, panels, and arrays without allocating substantially more pixels to one direction, while the global shutter preserves moving geometry at 15.5 fps.

Which optical coverage and mount fit MV-CH500-90TC-M58S-NF?

The fan-equipped configuration uses M58*0.75 with an 11.48 mm flange-back length. The lens must cover 22.4 mm × 22.4 mm and resolve 3.2 µm pixels across the 7008 × 7000 colour image.

How should the 10 Gigabit Ethernet link be planned?

Image transfer uses 10000 Mbit/s 10 Gigabit Ethernet and remains compatible with 1000 Mbit/s Gigabit Ethernet. The host and link should be selected for the chosen colour format, 7008 × 7000 frame size, and required rate up to 15.5 fps.

What power and trigger wiring does the camera use?

The supply range is 9 V DC to 24 V DC, and colour consumption is 12 W at 12 V DC. The 12-pin P10 carries one isolated input, one isolated output, one bidirectional non-isolated I/O, and one RS-232 channel.

What exposure control is available for moving surfaces?

Exposure runs from 15 µs to 10 sec, with gain from 1.25 × to 6 ×. At the short end and with suitable illumination, blur can be limited, while the global shutter keeps the 50 MP frame geometrically consistent.

What housing size and ambient range must be accommodated?

The M58 fan-equipped body measures 74 mm × 74 mm × 78.8 mm and weighs 550 g. It is IP40, operates from 0 °C to 50 °C, and is specified for 20% to 95% RH without condensation.