Line laser 3D camera · DL2000 series Line Laser 3D Camera
Hikrobot MV-DL2125
- Lead time
- from 5 days
- Warranty
- 36 months
Measurement envelope and integration
Wide conveyor-scale geometry defines MV-DL2125: the line laser 3D camera has a 1000 mm measurement range, 700 mm working distance, and a field of view that expands from 1000 mm near field to 2600 mm far field. Detection accuracy is ± 5 mm for a regular object. It scans at 600 fps over a 1 m3 measurement range, pairing a broad measurement envelope with rapid profile acquisition.
This geometry suits dimensional checks and three-dimensional capture of objects moving through a large inspection zone. A stated detection speed of 3 m/s and external or encoder triggering support conveyor synchronization, with encoder trigger input accepted up to 15 kHz. Gigabit Ethernet at 1000 Mbit/s carries measurement data, while 3DMVS and CodePlatform are the named software environments for acquisition and processing.
MV-DL2125 is the only line laser 3D camera in this group, so selection rests on its own measurement limits rather than a neighbour comparison. It fits a station needing ± 5 mm detection accuracy across a 1000 mm range and up to 2600 mm far-field coverage. The 354.1 mm × 65 mm × 123.4 mm body, 1.6 kg mass, 12 VDC to 24 VDC supply, and 0 °C to 45 °C working range set the mechanical and electrical boundaries for integration.
Overview
A DL series line laser 3D camera: it captures a section profile the same way a DP profiler does, but in a housing meant to be built into dimensioning and weighing stations.
‼️ The /OIML configurations carry an OIML certification mark in the price list — the international standard for legal-for-trade instruments. The vendor datasheet does not state how such a configuration differs technically; we confirm this when ordering.
Available versions
One device, different revisions. We ship the current one by default; if a specific revision is already installed on your line, name it in the request and we will match it.
| Part number | PN | |
|---|---|---|
| MV-DL2125-04H-R | 306400150 | |
| MV-DL2125-04H-R/OIML | 306400629 | |
| MV-DL2125-04P-R/OIML | 306400630 |
Specifications
| Data interface | GigE1 |
| 3D scan rate | 600 Hz @ measurement volume 1 m³1 |
| Depth measurement range | 1000 mm1 |
| Reference distance | 700 mm1,2 |
| Trigger mode | external, encoder1 |
| Laser safety class | 3B2 |
| Client software | 3DMVS, CodePlatform2 |
| Operating systems | Windows 7 (32/64-bit), Windows 10 (32/64-bit)2 |
| Digital I/O lines | 3 inputs, opto-isolated, lines 0, 3, 6; 3 outputs, opto-isolated, lines 1, 4, 71 |
| Digital input count | 32 |
| Digital output count | 32 |
| Digital I/O connector | M12 12-pin2 |
| Working temperature | 0…45 °C1 |
| Storage temperature | -30…80 °C1 |
| Humidity | 20…85 % @ non-condensing1 |
| Dimensions | 354.1×65×123.4 mm2 |
| Weight | 1600 g2 |
| Certification | CE2 |
| Clearance distance | 700 mm2 |
| Far field of view | 2600 mm1 |
| Measurement accuracy | -5…5 mm @ object regular object1 |
| Measurement speed | 3 m/s @ at detection accuracy -5…5 mm2 |
| Near field of view | 1000 mm1 |
| Operating environment | Logistics, warehouse, mechanical arm positioning and guidance, etc.; non-condensing2 |
| Output data type | point cloud, depth image, dimensions, volume; peak coordinates2 |
| Port inventory | GigE (data), RS-232 (serial)2 |
| Trigger signal frequency | ≤15000 Hz @ encoder trigger2 |
| Part number | Power supply | Power consumption |
|---|---|---|
| MV-DL2125-04H-R/OIML | 12…24 V @ DC1 | 10 W (typical) @ DC, supply voltage 12 V1 |
| MV-DL2125-04H-R | 12…24 V | 10 W (typical) @ DC, supply voltage 12 V |
| MV-DL2125-04P-R/OIML | 12…24 V @ DC1 | 19.2 W (typical) @ DC, supply voltage 24 V1 |
1 unofficial data
2 not stated for all variants
Documents
Selection and applications
Conveyor object dimension measurement. Wide-field line laser 3D capture. Encoder-synchronized scanning at 600 fps.
Minimum kit: A minimum MV-DL2125 station needs the camera, a Gigabit Ethernet cable, a 12 VDC to 24 VDC power source, and a 12-pin M12 connection when trigger or I/O signals are used.
Cables and accessories for this model
Compatibility per manufacturer data.
- Other
- 3D accessories
FAQ
What measurement envelope and stand-off does MV-DL2125 provide?
The measurement range is 1000 mm and the working distance is 700 mm. Across that geometry, the field of view is 1000 mm at the near field and 2600 mm at the far field, giving the integrator defined limits for object size and camera placement.
What scan rate and conveyor speed are stated for this 3D camera?
MV-DL2125 reaches 600 fps over a 1 m3 measurement range, and the stated detection speed is 3 m/s. These figures support synchronized three-dimensional capture of objects moving through a broad measurement zone.
Which trigger modes can synchronize MV-DL2125 with a moving line?
The camera supports external trigger and encoder trigger, with a maximum supported encoder trigger frequency of 15 kHz. The 12-pin M12 interface provides three opto-isolated inputs and three opto-isolated outputs for line integration.
What network and serial connections are available on MV-DL2125?
Measurement data uses Gigabit Ethernet at 1000 Mbit/s. The 12-pin M12 interface also includes one RS-232 connection, alongside three opto-isolated inputs and three opto-isolated outputs for communication and control signals.
What power and environmental limits apply to the MV-DL2125?
Supply input is 12 VDC to 24 VDC, with typical consumption stated as 10 W at 12 VDC. The working range is 0 °C to 45 °C, storage spans –30 °C to 80 °C, and operating humidity is 20% RH to 85% RH without condensation.
Which safety class and software are identified for the line laser system?
The laser is classified as Class 3B. The named software packages are 3DMVS and CodePlatform. These are the stated safety classification and software environment to include when planning operation and data processing for MV-DL2125.