Accessories · I/O & power cables
Trigger and IO adapter cables (MiniDP, DB9/DB15, M14, TJC8)
Trigger and IO adapter cables for Hikrobot cameras, CIS devices and frame grabbers: MiniDP, DB9/DB15, M14, DP200 and the TJC8 cascade. Variants terminate in open leads, terminal blocks, DB9, or a seven-port internal cascade.
- Warranty
- 36 months
Part numbers and versions
Standard (ST)
| Part number | PN | Connectors | Length | |
|---|---|---|---|---|
| MV-ACP-ST1210S2-open-ST-3m | 310102790 | M14 2-pin female → 2-pin terminal | 3 m | |
| MV-ACP-ST1210S2-open-ST-5m | 310102791 | M14 2-pin female → 2-pin terminal | 5 m | |
| MV-ACP-ST1210S2-open-ST-10m | 310102792 | M14 2-pin female → 2-pin terminal | 10 m |
High-flex (HF)
| Part number | PN | Connectors | Length | |
|---|---|---|---|---|
| MV-ACP-ST1210S2-open-HF-3m | 310103072 | M14 2-pin female → 2-pin terminal | 3 m | |
| MV-ACP-ST1210S2-open-HF-5m | 310103071 | M14 2-pin female → 2-pin terminal | 5 m | |
| MV-ACP-ST1210S2-open-HF-10m | 310103070 | M14 2-pin female → 2-pin terminal | 10 m |
Flexible (FL)
| Part number | PN | Connectors | Length | |
|---|---|---|---|---|
| MV-ACP-TJC8x7-FL-0.6m | 310101679 | TJC8 9-pin female header, 7-port cascade | 0.6 m |
| Part number | PN | Connectors | Length | |
|---|---|---|---|---|
| CML IO cable, DP200A2*5-DB9M, 30cm,Gray | 101517046 | 9-pin → DB9 male | 0.3 m | |
| MV-ACP-DB15F-open-ST(EMC)-3m | 310102051 | DB15 female → open leads | 3 m | |
| MV-ACP-DB9F-open-ST(EMC)-3m | 310101680 | DB9 female → open leads | 3 m | |
| MV-ACP-miniDP20M-open-ST(EMC)-3m | 310102965 | MiniDP 20-pin male → open leads | 3 m | |
| MV-ACP-DB15F-open-ST(EMC)-5m | 310102052 | DB15 female → open leads | 5 m | |
| MV-ACP-DB9F-open-ST(EMC)-5m | 310101681 | DB9 female → open leads | 5 m | |
| MV-ACP-miniDP20M-open-ST(EMC)-5m | 310102960 | MiniDP 20-pin male → open leads | 5 m | |
| MV-ACP-DB15F-open-ST(EMC)-7m | 310102053 | DB15 female → open leads | 7 m | |
| MV-ACP-DB9F-open-ST(EMC)-7m | 310101682 | DB9 female → open leads | 7 m | |
| MV-ACP-miniDP20M-open-ST(EMC)-7m | 310102964 | MiniDP 20-pin male → open leads | 7 m | |
| MV-ACP-DB15F-open-ST(EMC)-10m | 310102054 | DB15 female → open leads | 10 m | |
| MV-ACP-DB9F-open-ST(EMC)-10m | 310102048 | DB9 female → open leads | 10 m | |
| MV-ACP-miniDP20M-open-ST(EMC)-10m | 310102962 | MiniDP 20-pin male → open leads | 10 m | |
| MV-ACP-miniDP20M-open-ST(EMC)-15m | 310102963 | MiniDP 20-pin male → open leads | 15 m | |
| MV-ACP-miniDP20M-open-ST(EMC)-20m | 310103069 | MiniDP 20-pin male → open leads | 20 m |
Compatible cameras and code readers
Equipment categories this accessory is matched to:
FAQ
Which cables provide DB9 or DB15 to open-lead termination?
The EMC branches MV-ACP-DB9F-open-ST and MV-ACP-DB15F-open-ST use DB9 female or DB15 female at one end and open leads at the other. Both connector families are offered at 3, 5, 7, and 10 m.
What are the MiniDP cable length and termination choices?
Each MiniDP EMC assembly uses a MiniDP 20-pin male connector and open leads. Listed Standard lengths are 3, 5, 7, 10, 15, and 20 m, allowing the route length to be chosen without changing the endpoint type.
How do the Standard and High-flex M14 versions compare?
Both M14 groups connect an M14 2-pin female end to a 2-pin terminal and both are offered at 3, 5, and 10 m. Their distinction is construction: the ST products are Standard and the HF products are High-flex.
What is the purpose of the TJC8 flexible cable?
MV-ACP-TJC8x7-FL-0.6m is a Flexible cable with a TJC8 9-pin female header and a seven-port cascade. At 0.6 m, it belongs to an internal cascade arrangement rather than the longer open-lead cable branches.
Where does the short DP200-to-DB9 cable fit in the range?
The DP200 cable is a 0.3 m adapter from a 9-pin connection to DB9 male. It is a short connector-conversion item, distinct from the DB9 female EMC cables that run 3 to 10 m and terminate in open leads.