Area camera · CA Series

Hikrobot MV-CA023-10UM

1920×1200 pxSony® IMX24941 fpsUSB 3.0IP30
Price on requestAn engineer will confirm pricing and lead time in the first reply.
Lead time
from 5 days
Warranty
36 months
Find the right model
Hikrobot MV-CA023-10UM

Discontinued

The manufacturer has discontinued this model.

Last buy date at the manufacturer: 2025-12-30.

Manufacturer-listed replacement:

Motion tasks and interface choices

Acquisition in mono at 1920 × 1200 and 41 fps defines MV-CA023-10UM, built around the Sony IMX249 CMOS sensor and a global shutter. The 1/1.2-inch sensor uses 5.86 µm pixels, with a 70 dB dynamic range and gain from 0 dB to 20 dB. USB 3.0 connects the compact 29 × 29 × 30 mm camera to its host, and the body weighs approximately 56 g.

The monochrome output supports geometry, edge and presence checks where color separation is not part of the decision. A 34 µs minimum exposure and global shutter suit synchronized images of moving parts. USB 3.0 can provide 5 V DC power at a typical 2.5 W, while the Hirose connector adds an opto-isolated input, an opto-isolated output and a bidirectional non-isolated I/O line.

MV-CA023-10UC shares the USB 3.0 interface and short housing but records color images at 40 fps; choose it for color-based checks. MV-CA023-10GC also records color, reaches 41 fps and uses Gigabit Ethernet with PoE in a 42 mm-deep housing. MV-CA023-10GM retains the 41 fps network connection and records 2.9 W consumption at 12 V DC. Select MV-CA023-10UM for documented mono output over USB 3.0.

Specifications

Shutterglobal
Sensor modelSony® IMX249
Nominal optical sensor format1/1.2″
Sensor resolution1920×1200 px
Maximum frame rate41 fps @ resolution 1920×1200 px
Color modemono
Lens mountC-mount
Data interfaceUSB 3.0
Sensor technologyCMOS
Pixel size5.86×5.86 µm
Dynamic range70 dB
Signal-to-noise ratio40 dB
Exposure time34…10000000 µs
Auto exposureOff, Once, Continuous
Gain0…20 dB
Pixel formatMono8, Mono10, Mono10p, Mono12, Mono12p
Binning1x1, 1x2, 1x4, 2x1, 2x2, 2x4, 4x1, 4x2, 4x4
Decimation1x1, 1x2, 1x4, 2x1, 2x2, 2x4, 4x1, 4x2, 4x4
USB 2.0 compatibilityyes
Protocol compatibilityUSB3 Vision, GenICam
Third party software protocolUSB3 Vision
Client softwareMVS
Operating systemsWindows 7 (32/64-bit), Windows 10 (32/64-bit), Linux (32/64-bit)
Digital I/O lines1 input, opto-isolated, line 0; 1 output, opto-isolated, line 1; 1 bidirectional line, non-isolated, line 2
Digital I/O connectorHirose 6-pin
Power supply12 V
Power deliveryexternal power supply, USB
Power consumption2.5 W (typical) @ DC, USB 3.0, supply voltage 5 V
Ingress protectionIP30
Working temperature0…50 °C
Storage temperature-30…70 °C
Humidity20…80 % @ non-condensing
Dimensions29×29×30 mm
Weight56 g (approx.)
CertificationCE, RoHS, KC
Port inventoryUSB 3.0 (data)
Reverse imagehorizontal, vertical

Documents

Datasheet MV-CA023-10UMUC · PDF · 0.6 MB · English · revised 25 Aug 2025

Selection and applications

Monochrome edge and geometry inspection. Triggered capture of moving components. Compact USB image acquisition.

Minimum kit: The minimum setup is MV-CA023-10UM, a C-mount lens, a USB 3.0 cable, and USB 3.0 bus power or a 12 V DC supply.

Nearby in the range: MV-CA023-10UC — Choose it for color output at 1920 × 1200 through USB 3.0; MV-CA023-10GC — Choose it for color capture, Gigabit Ethernet and PoE at 41 fps; MV-CA023-10GM — Choose it for 41 fps acquisition through Gigabit Ethernet with PoE.

Cables and accessories for this model

Compatibility per manufacturer data.

Data cables
USB 3.0
I/O & power cables
Hirose 6-pin IO
Power
Power

All accessory families →

FAQ

What monochrome resolution and rate are specified at full frame?

MV-CA023-10UM records mono images at 1920 × 1200 and up to 41 fps. The Sony IMX249 CMOS sensor has a global shutter, a 1/1.2-inch format and 5.86 µm × 5.86 µm pixels.

What power arrangements are supported by the USB camera?

USB 3.0 can provide 5 V DC power to the camera, with typical consumption of 2.5 W. A 12 V DC supply is also supported, so power can be provided through USB or separately for the installation.

Which exposure and gain ranges are available for image setup?

Exposure is adjustable from 34 µs to 10 sec, and gain extends from 0 dB to 20 dB. The sensor's global shutter captures the complete image together, supporting synchronized acquisition of moving subjects.

How compact is MV-CA023-10UM and what are its operating limits?

The body measures 29 mm × 29 mm × 30 mm and weighs approximately 56 g. It is rated IP30 with correct lens installation and wiring, and its stated working range is 0 °C to 50 °C.

When should MV-CA023-10UC be selected instead of this model?

Select MV-CA023-10UC when color output is required. It uses the same Sony IMX249, 1920 × 1200 resolution, USB 3.0 interface and 30 mm body depth, with a documented maximum of 40 fps.

Typical applications