Area camera · CB013 series
Hikrobot MV-CB013-A0UC-S
- Warranty
- 36 months
Embedded color tasks and positioning
Color capture at 201 fps gives MV-CB013-A0UC-S its place in compact, high-cycle imaging. The CMOS camera records 1280 × 1024 with a global shutter on a 1/2-inch sensor and transfers the stream through USB 3.0. The optical configuration can be supplied without a mount, with C-mount or with M12-mount, and the corresponding mass is listed at approximately 10 g or 30 g.
This profile supports rapid colored-part sorting, assembly-state checks and label or marker detection when a 1280 × 1024 field contains the needed feature detail. The global shutter holds spatial relationships on a moving target, and two bidirectional non-isolated I/O lines allow the embedded controller to coordinate capture and illumination. USB 3.0 provides the camera power, with consumption stated as 2.8 W.
MV-CB013-A0UM-S matches the 1280 × 1024 resolution, 201 fps, USB interface and mount choices but returns monochrome data at a lower 1.6 W consumption. MV-CB016-10UC-C V4.0 raises color resolution to 1440 × 1080 but runs at 165.4 fps on a Sony IMX273. Select MV-CB013-A0UC-S when 201 fps and color are more important than the CB016 model's additional pixels.
Specifications
| Sensor type | CMOS |
| Sensor format | 1/2″ |
| Resolution | 1280 × 1024 px |
| Maximum frame rate | 201 fps |
| Shutter | global shutter |
| Mono color | Color |
| Data interface | USB3.0 |
| Digital I/O | Bi-directional non-isolated I/O × 2 (Line 2, Line 5) |
| Lens mount | None / C-mount / M12-mount |
| Power supply | USB3.0 power supply |
| Power consumption | 2.8 W |
| Operating temperature | 0 to 50 °C |
| Humidity | 20% to 80% RH, non-condensing |
| Weight | Approx. 10 g / Approx. 30 g |
Selection and applications
Rapid color sorting at 201 fps. Global-shutter assembly-state checks. Embedded marker detection at 1280 × 1024.
Minimum kit: MV-CB013-A0UC-S, a C-mount or M12-mount lens for the selected configuration, and a USB 3.0 cable providing both data and power form the minimum kit.
Nearby in the range: MV-CB013-A0UM-S — Prefer it when 201 fps is required without color data.; MV-CB016-10UC-C V4.0 — Prefer it for 1440 × 1080 color imaging at 165.4 fps..
Cables and accessories for this model
Compatibility per manufacturer data.
- Data cables
- USB 3.0
- Power
- Power
- Mounting
- Camera mounts
FAQ
Which optical configurations can MV-CB013-A0UC-S use?
The camera is listed in no-mount, C-mount and M12-mount configurations around a 1/2-inch sensor. The lens and mechanical variant should be chosen together so the image circle covers the 1280 × 1024 active area.
Does the 201 fps color camera need separate DC power?
No separate DC input is required in the documented arrangement. MV-CB013-A0UC-S is powered from USB 3.0 and consumes 2.8 W, so the host connection provides both the image-data route and operating power.
What resolution is maintained at the listed maximum rate?
The camera is specified for 201 fps with a 1280 × 1024 image. Its USB 3.0 interface carries the color stream, making the model suited to high-cycle tasks that do not require a larger multi-megapixel frame.
How can external timing be connected on this CB013 model?
Two bidirectional non-isolated I/O channels are provided as Line 2 and Line 5. They can link the camera timing to an embedded controller, sensor or illumination control within the electrical limits of the camera design.
What changes when selecting MV-CB013-A0UM-S instead?
The UM model changes the output from color to mono while retaining 1280 × 1024, 201 fps, the global shutter and USB 3.0 power. Its listed consumption is 1.6 W rather than the color model's 2.8 W.