Area camera · CH Series
Hikrobot MV-CH120-60TM-C-NF
- Warranty
- 36 months
Fast mono inspection role
An 80 fps Mono 8 stream at 4096 × 3072 makes MV-CH120-60TM-C-NF a high-rate network camera for intensity and geometry analysis. Its 12.6 MP Stacked BSI CMOS sensor has a 1.1-inch format, 3.45 µm pixels and a global shutter. The image path is 10 Gigabit Ethernet at 10000 Mbit/s, with Gigabit Ethernet compatibility at 1000 Mbit/s. A fan is integrated into the 50 mm × 45 mm × 68.6 mm body, and the lens interface is C-mount.
Fast edge measurement, surface-contrast inspection and repeated position capture follow from the mono output and simultaneous exposure. The sensor can expose from 20 µs, limiting feature travel within a frame when paired with suitable illumination. An external trigger enters through the opto-isolated Line 0 input; the P7 connector also provides an isolated output and bidirectional line. The network carries data, while a separate 9 VDC to 24 VDC connection supplies the camera at typical consumption of 8.2 W at 12 VDC.
The colour peer MV-CH120-60TC-C-NF V2.0 keeps 80 fps, C-mount and 10 Gigabit Ethernet but outputs Bayer GB 8. MV-CH120-60Y1M-NN V2.0 preserves mono 4096 × 3072 at 80 fps and changes to CoaXPress Micro-BNC with PoCXP in a smaller fanless body. MV-CH120-90TM-C-NF also uses 10 Gigabit Ethernet and C-mount, pairing a Gpixel GMAX3412 with 94 fps. Pick this model where the Stacked BSI platform and 80 fps network stream are the target combination.
Specifications
| Product type | 12.6 MP 10 GigE Area Scan Camera |
| Sensor type | CMOS, global shutter |
| Sensor model | Stacked BSI |
| Sensor format | 1.1″ |
| Resolution | 4096 × 3072 |
| Pixel size | 3.45 µm × 3.45 µm |
| Maximum frame rate | 80 fps @ 4096 × 3072 Mono 8 |
| Mono color | Mono |
| Dynamic range | 54.4 dB |
| Exposure time | 20 μs to 10 sec |
| Gain | 0 dB to 18 dB |
| Data interface | 10 Gigabit Ethernet (10000 Mbit/s), compatible with Gigabit Ethernet (1000 Mbit/s) |
| Digital I/O | 6-pin P7 connector provides power and I/O, including opto -isolated input × 1 (Line 0), opto -isolated output × 1 (Line 1), and bi-directional non-isolated I/O × 1 (Line 2). |
| Lens mount | C-mount |
| Power supply | 9 VDC to 24 VDC |
| Power consumption | Typ. 8.2 W @ 12 VDC |
| Ingress protection | IP40 (under proper lens installation and wiring) |
| Operating temperature | 0 °C to 50 °C (32 °F to 122 °F) |
| Storage temperature | –30 °C to 80 °C (–22 °F to 176 °F) |
| Humidity | 20% RH to 95% RH (no condensation) |
| Dimensions | 50 mm × 45 mm × 68.6 mm (2.0″ × 1.8″ × 2.7″) |
| Weight | Approx. 203 g (0.4 lb.) |
| Certification | CE-EMC, KC |
| Compatibility | GigE Vision V2.0, GenICam |
| Cooling | With fan |
Selection and applications
Mono edge measurement at 80 fps. High-rate 4096 × 3072 surface inspection. Triggered 20 µs capture over 10 Gigabit Ethernet.
Minimum kit: MV-CH120-60TM-C-NF, a C-mount lens, a 10 Gigabit Ethernet cable and a 9 VDC to 24 VDC source form the minimum acquisition package.
Nearby in the range: MV-CH120-60TC-C-NF V2.0 — Choose it for Bayer GB 8 colour at the same 4096 × 3072 resolution and 80 fps.; MV-CH120-90TM-C-NF — Choose it for mono 4096 × 3072 capture at 94 fps over 10 Gigabit Ethernet..
Cables and accessories for this model
Compatibility per manufacturer data.
- I/O & power cables
- Hirose 6-pin IO
- Power
- Power
- Mounting
- Camera mounts
FAQ
What full-frame mono rate is available through 10 Gigabit Ethernet?
MV-CH120-60TM-C-NF outputs 4096 × 3072 Mono 8 at up to 80 fps. Its native link is 10 Gigabit Ethernet at 10000 Mbit/s, and compatibility with 1000 Mbit/s Gigabit Ethernet is also specified.
How should C-mount optics be matched to this sensor?
The optical mount is C-mount and the Stacked BSI sensor format is 1.1 inches. Its active grid is 4096 × 3072 with 3.45 µm × 3.45 µm pixels, defining the coverage and sampling requirements.
Which exposure settings are relevant to rapid edge capture?
Exposure spans 20 µs to 10 sec and the CMOS sensor has a global shutter. The short end reduces motion travel during one exposure, while global timing keeps the complete edge in one capture interval.
What supply serves this 10 Gigabit Ethernet camera?
The supply input is specified as 9 VDC to 24 VDC. Typical power consumption is 8.2 W at 12 VDC, and the 50 mm × 45 mm × 68.6 mm enclosure includes a fan for cooling.
What changes when moving up to MV-CH120-90TM-C-NF?
The neighbour remains mono, C-mount and 10 Gigabit Ethernet, but uses a Gpixel GMAX3412 with 3.4 µm pixels. Its maximum is 94 fps at 4096 × 3072 rather than 80 fps.