Area camera · CH Series

Hikrobot MV-CH120-60VM

4096 × 3000Stacked BSI60.2 fps @ 4096 × 3000 Mono 8Dual USB 3.0
Price on requestAn engineer will confirm pricing and lead time in the first reply.
Warranty
36 months
Find the right model
Hikrobot MV-CH120-60VM

High-rate USB positioning

At 60.2 fps and 4096 × 3000, MV-CH120-60VM doubles the temporal reach of the nearby single-link USB mono camera while retaining a 12.3 MP frame. Its 1.1-inch Stacked BSI CMOS sensor uses 3.45 µm pixels and a global shutter. Mono 8 data travels through dual USB 3.0 interfaces, with USB 2.0 compatibility. The camera accepts C-mount optics and packages the sensor and dual connectors in a 29 mm × 44 mm × 59 mm body.

The high-rate mono stream is suited to moving-edge measurement, contrast-based defect detection and repeated observation of a fast mechanism near its processing host. A global shutter holds object geometry within each frame, while 60.2 fps reduces the interval between observations compared with the 30.7 fps single-USB model. The 4096 × 3000 grid supplies spatial detail across a 1.1-inch sensor without adding colour sampling to the data path.

MV-CH120-60VM is the mono, higher-rate member of the dual-USB pair; MV-CH120-60VC uses the same sensor size, resolution and enclosure but outputs Bayer GB 8 colour at 30 fps. MV-CH120-60UM retains Mono 8 and 4096 × 3000 while using a single USB 3.0 link at 30.7 fps in a 29 mm × 29 mm × 30 mm body. MV-CH120-60TM-C-NF raises mono capture to 80 fps and moves transport to 10 Gigabit Ethernet.

Specifications

Product type12.3 MP USB 3.0 Area Scan Camera
Sensor typeCMOS, global shutter
Sensor modelStacked BSI
Sensor format1.1″
Resolution4096 × 3000
Pixel size3.45 μm × 3.45 μm
Maximum frame rate60.2 fps @ 4096 × 3000 Mono 8
Mono colorMono
Data interfaceDual USB 3.0 (USB 3.0, compatible with USB 2.0)
Lens mountC-mount
Dimensions29 mm × 44 mm × 59 mm (1.1″ × 1.7″ × 2.3″)
CertificationCE-EMC, KC

Selection and applications

60.2 fps mono inspection beside a host. High-rate edge measurement at 4096 × 3000. Global-shutter capture over dual USB 3.0.

Minimum kit: MV-CH120-60VM, a C-mount lens, dual USB 3.0 data cabling and the camera power connection form the minimum acquisition set.

Nearby in the range: MV-CH120-60VC — Select it for Bayer GB 8 colour at 30 fps over dual USB 3.0.; MV-CH120-60UM — Select it for Mono 8 at 30.7 fps through one USB 3.0 interface..

Cables and accessories for this model

Compatibility per manufacturer data.

Data cables
USB 3.0
Power
Power

All accessory families →

FAQ

What full-frame output is stated for MV-CH120-60VM?

The camera delivers 4096 × 3000 Mono 8 at a maximum of 60.2 fps. Its Stacked BSI CMOS sensor has a 1.1-inch format, 3.45 µm × 3.45 µm pixels and a global shutter.

Why does this model expose two USB 3.0 interfaces?

The data interface is explicitly dual USB 3.0, with USB 2.0 compatibility. That configuration carries the camera's 4096 × 3000 Mono 8 stream at the stated 60.2 fps operating point.

Which lens mount is built into the dual-link mono housing?

The optical interface is C-mount. The camera body measures 29 mm × 44 mm × 59 mm, so mechanical integration must reserve room for that longer dual-USB enclosure and the selected lens.

How does global exposure help at the 60.2 fps operating point?

The global shutter exposes the complete 4096 × 3000 image together. Moving edges are therefore sampled at one instant rather than progressively, which supports geometric analysis from consecutive Mono 8 frames.

When is MV-CH120-60UM the lower-rate USB alternative?

MV-CH120-60UM is appropriate when one USB 3.0 interface and 30.7 fps are sufficient. It retains Mono 8, the 1.1-inch Stacked BSI sensor, 4096 × 3000 resolution and C-mount.

Typical applications