Area camera · CH Series
Hikrobot MV-CH120-90X2M-C-NN
- Warranty
- 36 months
DIN-connected mono inspection
Mono 8 output at 95 fps across 4096 × 3072 pixels defines MV-CH120-90X2M-C-NN. The camera uses a 12.6 MP, 1.1-inch Gpixel GMAX3412 with 3.4 µm pixels and a global shutter. Images pass through CoaXPress with DIN interfaces, while the optical side uses C-mount. The 50 mm × 50 mm × 45 mm enclosure has no fan or heat sink, weighs approximately 207 g and supports a 6 µs to 10 sec exposure interval.
The combination targets high-rate dimensional measurement, alignment and mono surface analysis in a machine with a DIN-connected CoaXPress receiver. Short global exposure limits the displacement recorded for moving edges, and successive 95 fps frames sample rapid state changes. The 12-pin P10 connector provides isolated input and output, a bidirectional non-isolated line and RS-232. CXP-0 supports PoCXP; the camera can alternatively accept 9 VDC to 24 VDC and typically consumes 5.8 W at 24 VDC.
MV-CH120-90X2M-C-NN is the mono partner to MV-CH120-90X2C-C-NN, which retains the DIN interface, frame and 95 fps rate but records Bayer GB 8 colour. MV-CH120-90TM-C-NF uses the same Gpixel sensor and C-mount at 94 fps, changing the link to 10 Gigabit Ethernet and adding a fan. MV-CH120-90Y1M-NN shifts CoaXPress to Micro-BNC, uses a smaller 29 mm × 29 mm × 42 mm enclosure and runs at 93.9 fps.
Specifications
| Product type | 12.6 MP CoaXPress Area Scan Camera |
| Sensor type | CMOS, global shutter |
| Sensor model | Gpixel GMAX3412 |
| Sensor format | 1.1″ |
| Resolution | 4096 × 3072 |
| Pixel size | 3.4 µm × 3.4 µm |
| Maximum frame rate | 95 fps @ 4096 × 3072 Mono 8 |
| Mono color | Mono |
| Dynamic range | 59.6 dB |
| Exposure time | 6 μs to 10 sec |
| Gain | 0 dB to 6.1 dB |
| Data interface | CoaXPress with DIN interface |
| Digital I/O | 12-pin P10 connector provides power and I/O, including opto-isolated input × 1 (Line 0), opto-isolated output × 1 (Line 1), bi-directional non-isolated I/O × 1 (Line 2), and RS-232 × 1. |
| Lens mount | C-mount |
| Power supply | 9 VDC to 24 VDC, CXP-0 supports PoCXP |
| Power consumption | Typ. 5.8 W @ 24 VDC |
| Ingress protection | IP40 (under proper lens installation and wiring) |
| Operating temperature | 0 °C to 50 °C (32 °F to 122 °F) |
| Storage temperature | –30 °C to 80 °C (–22 °F to 176 °F) |
| Humidity | 20% RH to 95% RH (no condensation) |
| Dimensions | 50 mm × 50 mm × 45 mm (2.0″ × 2.0″ × 1.8″) |
| Weight | Approx. 207 g (0.5 lb.) |
| Certification | CE-EMC, KC |
| Compatibility | CoaXPress, GenICam |
| Cooling | Without fan or heat sink |
Selection and applications
95 fps mono surface inspection. 6 µs global-shutter measurement of moving edges. 4096 × 3072 capture through CoaXPress DIN.
Minimum kit: MV-CH120-90X2M-C-NN, a C-mount lens, CoaXPress DIN cabling and PoCXP through CXP-0 or a 9 VDC to 24 VDC source form the minimum setup.
Nearby in the range: MV-CH120-90X2C-C-NN — Pick it for Bayer GB 8 colour at the same 4096 × 3072 resolution and 95 fps.; MV-CH120-90TM-C-NF — Pick it for 94 fps Mono 8 over 10 Gigabit Ethernet instead of CoaXPress..
Cables and accessories for this model
Compatibility per manufacturer data.
- Data cables
- CoaXPress
- I/O & power cables
- 12-pin IO
- Power
- Power
- Mounting
- Camera mounts
FAQ
What mono format is carried by the CoaXPress DIN interface?
MV-CH120-90X2M-C-NN outputs 4096 × 3072 Mono 8 at up to 95 fps. Its 1.1-inch Gpixel GMAX3412 uses 3.4 µm × 3.4 µm pixels, a global shutter and C-mount optics.
Which power options are available through or beside CXP-0?
CXP-0 is specified to support PoCXP. External input from 9 VDC to 24 VDC is also accepted through the P10 arrangement, and typical camera consumption is 5.8 W at 24 VDC.
Does the 50 mm square housing contain active cooling?
The 50 mm × 50 mm × 45 mm enclosure is specified without a fan or heat sink. It weighs approximately 207 g and operates from 0 °C to 50 °C when integrated within its stated limits.
What exposure and I/O controls support rapid measurements?
Exposure spans 6 µs to 10 sec with a global shutter. The 12-pin P10 connector adds an isolated input, isolated output, bidirectional non-isolated I/O and one RS-232 channel.
How does MV-CH120-90Y1M-NN change the physical CXP connection?
It retains the Gpixel GMAX3412, C-mount and 4096 × 3072 Mono 8 output, operating at 93.9 fps. Its CoaXPress interface uses Micro-BNC and the body contracts to 29 mm × 29 mm × 42 mm.