Area camera · CH Series
Hikrobot MV-CH1510-11XC-M72-TF
- Lead time
- from 5 days
- Warranty
- 36 months
Engineering fit and alternatives
A TEC-cooled 14208 × 10640 color image characterizes MV-CH1510-11XC-M72-TF. The 151.2 MP Sony IMX411 rolling-shutter CMOS sensor spans 66.7 mm with 3.76 µm pixels and delivers full frames at 6.2 fps. CoaXPress with DIN connectors forms the data interface. The result is a camera for very large stationary color fields where the application needs a complete high-sampling view rather than a rapid frame sequence.
Large patterned panels, fixed color assemblies and broad printed surfaces can be captured in one frame if motion is stopped for the rolling-shutter readout. The M72 × 0.75 mount provides the mechanical interface to optics covering the 66.7 mm format. TEC cooling is built into a 120 mm × 120 mm × 84.6 mm camera body, making its face and cooling method part of the installation decision.
MV-CH1510-10XC-M72-NF matches the 14208 × 10640 color frame and 6.2 fps DIN CoaXPress output, but uses fan cooling in a 100 mm × 100 mm × 74.3 mm package. MV-CH1510-10XC-M72-TF V2.0 retains TEC cooling with a smaller 100 mm face and a 14192 × 10640 Bayer RG 8 image. Select 11XC for the 14208-pixel-wide color frame with TEC cooling, the NF for a fan-cooled shorter body, or the color V2.0 for its smaller TEC enclosure.
Specifications
| Shutter | rolling |
| Sensor model | Sony® IMX411 |
| Sensor resolution | 14208×10640 px |
| Maximum frame rate | 6.2 fps @ resolution 14208×10640 px |
| Color mode | color |
| Lens mount | M72×0.75 |
| Data interface | CoaXPress |
| Sensor technology | CMOS |
| Pixel size | 3.76×3.76 µm |
| Dynamic range | 78.7 dB |
| Signal-to-noise ratio | 46.4 dB |
| Exposure time | 15…10000000 µs |
| Auto exposure | Off, Once, Continuous, global reset, rolling shutter |
| Gain | 0…36 dB |
| Pixel format | Mono8, Mono10, Mono12, Mono16, BayerRG8, BayerRG10, BayerRG12, BayerRG16, RGB8 |
| Binning | 1x1, 1x2, 1x4, 2x1, 2x2, 2x4, 4x1, 4x2, 4x4 |
| Decimation | not available |
| Flange focal distance | 19.55 mm |
| Protocol compatibility | CoaXPress, GenICam |
| Third party software protocol | CoaXPress |
| Operating systems | Windows 7 (32/64-bit), Windows 10 (32/64-bit), Windows 11 (64-bit) |
| Digital I/O lines | 1 input, opto-isolated, line 0; 1 output, opto-isolated, line 1; 1 bidirectional line, non-isolated, line 2 |
| Digital I/O connector | P10 12-pin |
| Power supply | 24 V |
| Power delivery | external power supply |
| Power consumption | 22 W (typical) @ supply voltage 24 V, TEC cooling off; 60 W (typical) @ supply voltage 24 V, TEC cooling on |
| Cooling | thermoelectric |
| Ingress protection | IP40 @ with lens and cables properly installed |
| Working temperature | 0…50 °C |
| Storage temperature | -30…70 °C |
| Humidity | 20…95 % @ non-condensing |
| Dimensions | 120×120×84.6 mm |
| Weight | 1900 g (approx.) |
| Certification | CE, RoHS, KC |
| Physical sensor diagonal | 66.7 mm |
| Port inventory | RS-232 (serial) |
| Reverse image | horizontal |
| System memory required | ≥8 GB |
Selection and applications
TEC-cooled capture of large color panels. Stationary inspection at 14208 × 10640. DIN CoaXPress imaging at 6.2 fps.
Minimum setup: MV-CH1510-11XC-M72-TF, an M72 × 0.75 lens, a DIN-interface CoaXPress cable, and power wired to the camera specification.
Nearby in the range: MV-CH1510-10XC-M72-NF — Prefer it for the same color frame and rate with fan cooling in a smaller body; MV-CH1510-10XC-M72-TF V2.0 — Prefer it for TEC-cooled color in a 100 mm body at 14192 × 10640.
Cables and accessories for this model
Compatibility per manufacturer data.
- Data cables
- CoaXPress
- Power
- Power
- Mounting
- Camera mounts
FAQ
What is the full-frame output of MV-CH1510-11XC-M72-TF?
The Sony IMX411 provides 14208 × 10640 color pixels at a maximum listed rate of 6.2 fps. It is a 151.2 MP rolling-shutter CMOS sensor with a 3.76 µm × 3.76 µm pitch across a 66.7 mm format.
Why should motion stop for MV-CH1510-11XC-M72-TF capture?
Because the sensor uses a rolling shutter, rows do not share the single exposure timing of a global shutter. Holding or settling the target during acquisition is the suitable way to preserve geometry across the 14208 × 10640 image.
What cable-side interface does MV-CH1510-11XC-M72-TF expose?
The camera uses CoaXPress with DIN connectors. Its acquisition path should therefore provide matching DIN cable connections and handle a 14208 × 10640 color stream at the stated maximum of 6.2 fps.
What optics interface surrounds the 151.2 MP sensor?
An M72 × 0.75 lens mount is used for the 66.7 mm Sony IMX411. The selected optics need to cover that format and resolve the 3.76 µm pitch over the full 14208 × 10640 imaging image area.
How does the 11XC body differ from the color NF version?
MV-CH1510-11XC-M72-TF has TEC cooling and measures 120 mm × 120 mm × 84.6 mm. MV-CH1510-10XC-M72-NF uses a fan and measures 100 mm × 100 mm × 74.3 mm, although both output 14208 × 10640 color at 6.2 fps.