Hikrobot MV-CH240-10TM-C-NN

Tasks and camera-range context

A 24 MP global-shutter image at 35.1 fps places the Sony IMX540 between very-high-speed and very-high-resolution cameras. Its 5328 × 4600 output uses 2.74 × 2.74 μm pixels, and the monochrome stream travels over 10 Gigabit Ethernet with Gigabit Ethernet support. The C-mount interface keeps the optical connection distinct from the large-format M58 and M72 models.

Use this combination for moving-component inspection, alignment checks and surface analysis that need simultaneous exposure but not the 222 fps rate of the CH210. The 10 Gigabit Ethernet link supports the 35.1 fps image stream, while the 12-pin P10 connection provides isolated input and output plus bidirectional I/O and RS-232 for trigger and line coordination.

MV-CH210-90YM-M58S-NN is the faster global-shutter neighbour, reaching 222 fps at 5120 × 4096 through CoaXPress. MV-CH320-60TM-M58S-NN supplies 7744 × 4336 pixels at 30 fps over 10 Gigabit Ethernet but uses a rolling shutter. For a smaller 29 × 44 × 59 mm Gigabit Ethernet body and square 5120 × 5120 image, MV-CH250-60GM trades global exposure and rate for compact integration.

Specifications

Selection and applications

Moving-component inspection. Global-shutter alignment checks. Medium-rate surface analysis.

Minimum kit: Start with the camera, a C-mount lens, a 10 Gigabit Ethernet cable and a 9 to 24 V DC power supply.

Nearby in the range: MV-CH210-90YM-M58S-NN — Choose it when global-shutter acquisition must rise from 35.1 fps to 222 fps.; MV-CH320-60TM-M58S-NN — Choose it for 7744 × 4336 resolution at 30 fps when a rolling shutter is acceptable.; MV-CH250-60GM — Choose it for a 29 × 44 × 59 mm C-mount body and square 5120 × 5120 output..

Cables and accessories for this model

Compatibility per manufacturer data.

Data cables

GigE10GigE

I/O & power cables

12-pin IO

Power

Power

Mounting

Camera mounts

All accessory families →

FAQ

When does the IMX540 global shutter matter in an inspection cell?

All 5328 × 4600 pixels share the same exposure interval, which preserves the shape of a moving component more directly than row-sequential capture. At up to 35.1 fps, the camera fits repeated inspection where motion handling matters more than the larger image sizes of rolling-shutter models.

Can this camera run on Gigabit Ethernet as well as 10 Gigabit Ethernet?

Yes. The listed interface is 10 Gigabit Ethernet at 10 Gbit/s and it is compatible with Gigabit Ethernet at 1 Gbit/s. Use the faster link when the 5328 × 4600 stream must approach the 35.1 fps maximum; link capacity affects transport planning.

What optical mount is used by the MV-CH240-10TM-C-NN camera?

This model uses C-mount. Select a C-mount lens able to cover the Sony IMX540 imaging area and resolve its 2.74 × 2.74 μm pixel pitch. M58, M72 and F-mount optics used on neighbouring bodies do not directly match the camera's native interface.

How are power, trigger and serial control connected?

Power input is 9 to 24 V DC and typical consumption is 10 W. A 12-pin P10 connector carries one opto-isolated input, one opto-isolated output, one bidirectional non-isolated I/O and one RS-232 channel for external timing and control.

What environmental envelope applies to this 10 GigE model?

The camera operates from 0 to 50 °C and is rated IP40, with storage from -30 to 70 °C and humidity from 20 to 95 % RH. Its 84 × 84 × 92.5 mm body weighs 600 g, which should be included in mount and enclosure planning.