Area camera · CH Series
Hikrobot MV-CH310-10GM-M58S-NF
- Warranty
- 36 months
Deployment profile and range position
Monochrome 31.4 MP capture in the shorter M58 housing defines MV-CH310-10GM-M58S-NF. Its Sony® IMX342 global-shutter sensor produces 6464 × 4852 Mono 8 images at 3.9 fps through Gigabit Ethernet. The 22.3 mm × 16.7 mm array has 3.45 µm pixels, with M58 × 0.75 optics mounted to a fan-cooled 74 mm × 74 mm × 74.3 mm body.
High-detail edge location, dimensional checks, and broad surface inspection can use the large monochrome frame at indexed stations. UltraShort exposure covers brief strobed events down to 3 μs, while standard exposure reaches 2 sec for stationary targets. Separate 9–24 V DC powers the typical 9 W load, and the P10 connection carries isolated trigger input and output, bidirectional I/O, and RS-232.
MV-CH310-10GM-F-NF keeps the same sensor, Mono 8 output, 3.9 fps, and fan cooling but changes to F-mount and a deeper 80.1 mm, approximately 600 g body. MV-CH310-10GC-M58S-NF preserves M58 × 0.75 and the 74.3 mm housing while switching to Bayer RG 8 color and extending exposure to 10 sec. MV-CH310-10GC-F-NF combines that color output with F-mount.
Specifications
| Product type | 31.4 MP GigE Area Scan Camera |
| Sensor type | CMOS, global shutter |
| Sensor model | Sony® IMX342 |
| Sensor format | 22.3 mm × 16.7 mm |
| Resolution | 6464 × 4852 |
| Pixel size | 3.45 µm × 3.45 µm |
| Maximum frame rate | 3.9 fps @ 6464 × 4852 Mono 8 |
| Mono color | Mono |
| Dynamic range | 73 dB |
| Exposure time | UltraShort exposure mode: 3 μs to 33 μs Standard exposure mode: 36 μs to 2 sec |
| Gain | 0 dB to 24 dB |
| Data interface | Gigabit Ethernet (1000 Mbit/s), compatible with Fast Ethernet (100 Mbit/s) |
| Digital I/O | 12-pin P10 connector provides power and I/O, including opto -isolated input × 1 (Line 0), opto -isolated output × 1 (Line 1), bi-directional non-isolated I/O × 1 (Line 2), and RS-232 × 1. |
| Lens mount | M58 × 0.75 |
| Power supply | 9 VDC to 24 VDC |
| Power consumption | Typ. 9 W @ 12 VDC |
| Ingress protection | IP40 (under proper lens installation and wiring) |
| Operating temperature | 0 °C to 50 °C (32 °F to 122 °F) |
| Storage temperature | –30 °C to 70 °C (–22 °F to 158 °F) |
| Humidity | 20% RH to 95% RH (no condensation) |
| Dimensions | 74 mm × 74 mm × 74.3 mm (2.9″ × 2.9″ × 2.9″) |
| Weight | Approx. 550 g (1.2 lb.) |
| Certification | CE-EMC, KC |
| Compatibility | GigE Vision V2.0, GenICam |
| Cooling | With fan |
Selection and applications
Large-frame monochrome measurement. Indexed component edge inspection. Detailed surface-contrast analysis.
Minimum kit: The starting set is the camera, an M58 × 0.75 lens covering 22.3 mm × 16.7 mm, a Gigabit Ethernet cable and host connection, and a 9–24 V DC supply.
Nearby in the range: MV-CH310-10GM-F-NF — Use it for the same monochrome sensor and rate with F-mount optics.; MV-CH310-10GC-M58S-NF — Use it for Bayer RG 8 color through the same M58 × 0.75 mount.; MV-CH310-10GC-F-NF — Use it when both color output and F-mount optics are required..
Cables and accessories for this model
Compatibility per manufacturer data.
- Data cables
- GigE
- I/O & power cables
- 12-pin IO
- Power
- Power
- Mounting
- Camera mounts
FAQ
What image stream is specified for MV-CH310-10GM-M58S-NF?
The full output is 6464 × 4852 Mono 8 at up to 3.9 fps. A 31.4 MP Sony® IMX342 with 3.45 µm pixels and a global shutter supplies the image from a 22.3 mm × 16.7 mm active area.
How does M58 mounting change the monochrome package?
This model uses M58 × 0.75 and measures 74.3 mm deep at about 550 g. The related MV-CH310-10GM-F-NF uses F-mount, measures 80.1 mm deep, and weighs about 600 g; sensor and frame rate remain the same.
What are the short and long exposure boundaries for this model?
UltraShort mode extends from 3 μs to 33 μs, and standard mode runs from 36 μs to 2 sec. Global exposure applies the selected interval across all pixels, supporting strobed indexed capture and longer stationary integration.
Which network rates does the M58 monochrome camera accept?
The image interface is 1000 Mbit/s Gigabit Ethernet and can also operate at 100 Mbit/s Fast Ethernet. Full-frame performance is listed as 3.9 fps for 6464 × 4852 Mono 8 output.
What supply and operating limits apply to this enclosure?
Input power is 9 V DC to 24 V DC and typical consumption is 9 W at 12 V DC. The fan-cooled, IP40 body operates from 0 °C to 50 °C when the lens and wiring are installed correctly.