Area camera · CH Series
Hikrobot MV-CH6040-10XM-M72-TF
- Lead time
- from 5 days
- Warranty
- 36 months
Capture tasks and range position
Resolution, cadence and interface set MV-CH6040-10XM-M72-TF apart: 28416 × 21280, 1.45 fps @ 28416 × 21280 Mono 8 and CoaXPress with DIN interface. The CMOS sensor uses a rolling shutter; its 3.76 µm × 3.76 µm pixels cover a 66.7 mm sensor; the image path is CoaXPress with DIN interface; the optical interface is M72 × 0.75. The monochrome output suits measurements and contrast-based inspection where color separation is not the measured feature.
Engineering applications include large-area metrology, fine-surface mapping and static monochrome inspection. The rolling shutter favours stationary targets, stopped indexing or strobe-controlled exposure; 1.45 fps @ 28416 × 21280 Mono 8 is the stated readout point and must be considered with exposure timing. The 12-pin P10 connector carries the camera power connection together with I/O. It also provides the listed control lines for coordinating acquisition with the machine.
Two same-category references are MV-CH6040-10XC-M72-TF and MV-CH1010-10CM-M72-NF. The first combines 28416 × 21280, 1.38 fps @ 14208 × 10640 RGB 8 and CoaXPress with DIN interface; prefer it when color output with 1.38 fps @ 14208 × 10640 rgb 8 is required. The second uses M72 × 0.75 optics with mono output at 8.1 fps. Prefer it when Camera Link with SDR interface is the required image interface.
Specifications
| Shutter | rolling |
| Sensor model | Sony IMX411 |
| Sensor resolution | 28416×21280 px1 |
| Maximum frame rate | 1.45 fps @ Mono8, resolution 28416×21280 px |
| Color mode | mono |
| Lens mount | M72×0.75 |
| Data interface | CoaXPress; RS-232 |
| Sensor technology | CMOS |
| Pixel size | 3.76×3.76 µm |
| Dynamic range | 78.7 dB |
| Signal-to-noise ratio | 46.4 dB |
| Exposure time | 15…1000000 µs |
| Auto exposure | Auto, Off, Once, rolling shutter, global reset |
| Gain | 0…40 dB |
| Pixel format | Mono8, Mono10, Mono12, Mono16 |
| Binning | 1x1, 1x2, 1x4, 2x1, 2x2, 2x4, 4x1, 4x2, 4x4 |
| Decimation | not available |
| Data interface connector | DIN |
| Protocol compatibility | CoaXPress, GenICam |
| Third party software protocol | CoaXPress |
| Operating systems | Windows 7 (32/64-bit), Windows 10 (32/64-bit), Windows 11 (64-bit), Linux (32/64-bit) |
| Digital I/O lines | 1 input, opto-isolated, line 0; 1 output, opto-isolated, line 1; 1 bidirectional line, non-isolated, line 2 |
| Digital input count | 1 |
| Digital output count | 1 |
| Digital I/O connector | P10 12-pin |
| Power supply | 24 V |
| Power delivery | external power supply |
| Power consumption | 19.5 W (typical) @ DC, supply voltage 24 V, TEC cooling off; 31.2 W (typical) @ DC, supply voltage 24 V, TEC cooling on |
| Cooling | thermoelectric |
| Ingress protection | IP40 @ with lens and cables properly installed |
| Working temperature | 0…50 °C |
| Storage temperature | -30…80 °C |
| Humidity | 20…95 % @ non-condensing |
| Dimensions | 120×120×102 mm |
| Weight | 2150 g (approx.) |
| Certification | CE, RoHS, KC |
| Back focal length | 19.55 mm |
| Performance temperature | 20…35 °C |
| Physical sensor diagonal | 66.7 mm |
| Port inventory | CoaXPress CXP-6 ×4 (data), RS-232 (serial) |
| Reverse image | horizontal |
1 unofficial data
Documents
Selection and applications
Mono inspection at 28416 × 21280. Detailed capture of stationary or indexed targets. Acquisition at 1.45 fps @ 28416 × 21280 Mono 8 over CoaXPress with DIN interface.
Minimum kit: Start with MV-CH6040-10XM-M72-TF, a lens with the M72 × 0.75 interface covering the 66.7 mm sensor, a cable for CoaXPress with DIN interface, and power through the 12-pin P10 connector.
Nearby in the range: MV-CH6040-10XC-M72-TF — Prefer it when color output with 1.38 fps @ 14208 × 10640 RGB 8 is required; MV-CH1010-10CM-M72-NF — Prefer it when Camera Link with SDR interface is the required image interface.
Cables and accessories for this model
Compatibility per manufacturer data.
- Data cables
- CoaXPress
- I/O & power cables
- 12-pin IO
- Power
- Power
- Mounting
- Camera mounts
FAQ
How do shutter timing and frame rate shape MV-CH6040-10XM-M72-TF motion capture?
MV-CH6040-10XM-M72-TF uses a rolling shutter that reads the 28416 × 21280 image sequentially, so stationary targets, stopped indexing or strobe-controlled exposure are the appropriate starting point. The stated rate is 1.45 fps @ 28416 × 21280 Mono 8, and exposure can be set within 15 µs to 1 s (604 MP).
What link and power arrangement are required for MV-CH6040-10XM-M72-TF?
MV-CH6040-10XM-M72-TF transfers images through CoaXPress with DIN interface. The 12-pin P10 connector carries the camera power connection together with I/O.
How should optics be selected for the MV-CH6040-10XM-M72-TF sensor and mount?
The optical chain for MV-CH6040-10XM-M72-TF is anchored by the M72 × 0.75 interface. Its stated sensor format is 66.7 mm, which sets the minimum image-circle coverage. The 3.76 µm × 3.76 µm pixels also set the lens-resolution target for a 28416 × 21280 frame. After coverage and resolving power are checked, choose focal length from the required scene geometry.
Which housing and operating limits apply to MV-CH6040-10XM-M72-TF?
MV-CH6040-10XM-M72-TF has an IP40 (under proper lens installation and wiring) enclosure and a 120 mm × 120 mm × 102 mm (4.7" × 4.7" × 4.0") body. The humidity range is 20% RH to 95% RH (no condensation). The enclosure rating and mechanical envelope should be checked against the installation environment.
How do MV-CH6040-10XM-M72-TF and MV-CH6040-10XC-M72-TF differ as selection options?
MV-CH6040-10XM-M72-TF records mono images with 1.45 fps @ 28416 × 21280 Mono 8 through CoaXPress with DIN interface; its lens connection is M72 × 0.75. MV-CH6040-10XC-M72-TF records color images with 1.38 fps @ 14208 × 10640 RGB 8 through CoaXPress with DIN interface and uses M72 × 0.75 optics. Prefer it when color output with 1.38 fps @ 14208 × 10640 RGB 8 is required.
What acquisition controls are documented for MV-CH6040-10XM-M72-TF?
MV-CH6040-10XM-M72-TF uses the following control connection: 12-pin P10 connector provides power and I/O, including opto-isolated input × 1 (Line 0), opto-isolated output × 1 (Line 1), bi-directional non-isolated I/O × 1 (Line 2), and RS-232 × 1. Exposure spans 15 µs to 1 s (604 MP), and gain spans 0 dB to 40 dB.