Line scan camera · CL Series
Hikrobot MV-CL082-91F2M
- Warranty
- 36 months
Dual-fiber 8K mono scanning at 200 kHz
A 200 kHz maximum over a 2LC fiber connector is the defining performance point of MV-CL082-91F2M. Its mono CMOS sensor provides 8192 × 2 resolution with 7 × 7 µm pixels and supports both 1-Line and 2-TDI acquisition. Exposure extends from 3 µs to 10 ms, dynamic range is 63.4 dB and the listed gain is 1.0×.
The long line and high transfer rate suit inspection of wide material moving at a rate that requires dense sampling in both cross-web and travel directions. Four configurable I/O lines on the 12-pin P10 power connection can accept single-ended or differential signaling for synchronization. The camera uses 12 V DC to 24 V DC and draws a typical 14 W at 24 V DC.
MV-CL082-91F1M retains the 8192 × 2 mono array and TDI choice but uses a single LC fiber connector, with 146 kHz in 1-Line and 100 kHz in 2-TDI. MV-CL082-92CM changes the transport to Camera Link and reaches 100 kHz in 80-bit mode. MV-CL084-91F2M keeps the 2LC interface and 200 kHz 1-Line rate, extending the array to 8192 × 4 and adding 4-TDI plus multi-light control.
Available versions
One device, different revisions. We ship the current one by default; if a specific revision is already installed on your line, name it in the request and we will match it.
| Part number | PN | Version | |
|---|---|---|---|
| MV-CL082-91F2M discontinued | 306302172 | — | |
| MV-CL082-91F2M V2.0 | 306303818 | V2.0 |
Specifications
| Product type | 8192 px Fiber Line Scan Camera |
| Sensor type | CMOS |
| Resolution | 8192 × 2 |
| Pixel size | 7 μm × 7 μm |
| Mono color | Mono |
| Dynamic range | 63.4 dB |
| Exposure time | 3 μs to 10 ms |
| Gain | 1.0 × |
| Data interface | 2LC fiber connector |
| Digital I/O | 12-pin P10 connector provides power and I/O: Configurable input/output × 4 (Line 0/1/3/4) and single-ended/differential is supported. |
| Lens mount | M72 *0.75, flange back length 12 mm, applicable to F-mount via lens adapter |
| Power supply | 12 VDC to 24 VDC |
| Power consumption | Typ. 14 W @ 24 VDC |
| Ingress protection | IP40 (under proper lens installation and wiring) |
| Operating temperature | –20 °C to 50 °C (–4 °F to 122 °F) |
| Storage temperature | –30 °C to 80 °C (–22 °F to 176 °F) |
| Humidity | 5% RH to 90% RH (no condensation) |
| Dimensions | 132 mm × 76 mm × 57.4 mm (5.2″ × 3.0″ × 2.3″) |
| Weight | Approx. 600 g (1.3 lb.) |
| Certification | CE-EMC, KC, UL |
| Compatibility | Self-developed protocol, GenICam |
| Max line rate | 200 kHz |
| Line length | 8192 |
| Scan type | Supports 1-Line, 2-TDI |
Selection and applications
8K mono scanning at 200 kHz. Dual-fiber wide-web inspection. High-density 2-TDI acquisition.
Minimum kit: Combine the MV-CL082-91F2M with an M72*0.75 line-scan lens or adapted F-mount lens, a 2LC fiber cable and receiver, and a 12 V DC to 24 V DC supply through the 12-pin P10 connector.
Nearby in the range: MV-CL082-91F1M — Prefer it for a single LC fiber connection at up to 146 kHz.; MV-CL082-92CM — Prefer it for 8192 × 2 mono acquisition through Camera Link.; MV-CL084-91F2M — Prefer it for an 8192 × 4 array with 4-TDI and multi-light control..
Cables and accessories for this model
Compatibility per manufacturer data.
- I/O & power cables
- 12-pin IO
- Power
- Power
- Mounting
- Camera mounts
FAQ
What does the 200 kHz rating mean for MV-CL082-91F2M?
The maximum line-rate entry is 200 kHz for this 8192 × 2 mono camera. The sensor supports 1-Line and 2-TDI acquisition, while the image stream uses the stated 2LC fiber connector rather than Camera Link or Ethernet.
Which mount and adapter are used with MV-CL082-91F2M?
The optical thread is M72*0.75 and the flange back length is 12 mm. F-mount lenses can be installed through an adapter. The selected lens must cover the 8192-pixel line and provide resolution suited to 7 µm pixels.
How much power should be allocated for MV-CL082-91F2M?
The camera accepts 12 V DC to 24 V DC and has a typical draw of 14 W at 24 V DC. Power and four configurable I/O lines use the 12-pin P10 connector; the I/O supports single-ended and differential signals.
What are the temperature and sealing limits of MV-CL082-91F2M?
Its working range is -20 °C to 50 °C at 5% RH to 90% RH without condensation, and storage is -30 °C to 80 °C. The enclosure is IP40 with proper lens installation and wiring and is not a liquid-sealed housing.
Why choose MV-CL082-91F2M over the MV-CL082-91F1M fiber variant?
MV-CL082-91F2M raises the maximum line rate to 200 kHz and uses a 2LC fiber connector. MV-CL082-91F1M uses an LC fiber connector and lists 146 kHz in 1-Line and 100 kHz in 2-TDI, with the same 8192 × 2 resolution.