Line scan camera · CL Series
Hikrobot MV-CL082-92CM
- Warranty
- 36 months
Two-row 8K mono over Camera Link
An 8192 × 2 mono CMOS line with selectable 1-line and 2-TDI imaging anchors MV-CL082-92CM in the Camera Link part of the range. The 7 µm pixels operate at 20 kHz in Base, 40 kHz in Medium, 80 kHz in Full and 100 kHz in 80-bit mode. Camera Link uses an SDR connector, with USB serving firmware-update duties.
The 8192-sample width supports wide-web surface and edge inspection where a frame grabber is already part of the acquisition chain. Exposure from 3 µs to 10 ms and the two row modes allow the optical and motion setup to be configured around the line rate. A 12-pin P10 connector carries power and four configurable I/O lines, while Camera Link CC1/CC2/CC3/CC4 provides additional control paths.
MV-CL081-41CM reduces the sensor to an 8192 × 1 row and reaches 80 kHz in Full mode, with 5.8 W typical draw rather than 9.8 W. MV-CL082-91F1M keeps 8192 × 2 and 2-TDI but changes to LC fiber, reaching 146 kHz in 1-Line. MV-CL084-91CM adds a 4-row sensor and 4-TDI while retaining Camera Link and a 100 kHz 80-bit limit.
Available versions
One device, different revisions. We ship the current one by default; if a specific revision is already installed on your line, name it in the request and we will match it.
| Part number | PN | Version | |
|---|---|---|---|
| MV-CL082-92CM discontinued | 306301830 / 306301831 | — | |
| MV-CL082-92CM V2.0 | 306303829 / 306303830 | V2.0 |
Specifications
| Product type | 8192 px Camera Link Line Scan Camera |
| Sensor type | CMOS |
| Resolution | 8192 × 2 |
| Pixel size | 7 μm |
| Mono color | Mono |
| Dynamic range | 63.4 dB |
| Exposure time | 3 μs to 10 ms |
| Gain | Supports 1.0 × |
| Data interface | Camera Link (SDR connector); USB interface for updating firmware |
| Digital I/O | 12-pin P10 connector provides power and I/O: configurable input/output × 4 (Line 0/1/3/4) and support single-ended/differential. Camera Link provides I/O (CC1/CC2/CC3/CC4). |
| Lens mount | M72*0.75, flange back length 12 mm, applicable to F-mount via lens adapter |
| Power supply | 12 VDC to 24 VDC |
| Power consumption | Typ. 9.8 W @ 12 VDC |
| Ingress protection | IP40 (under proper lens installation and wiring) |
| Operating temperature | –20 °C to 55 °C (–4 °F to 131 °F) |
| Storage temperature | –30 °C to 80 °C (–22 °F to 176 °F) |
| Humidity | 5% RH to 90% RH (no condensation) |
| Dimensions | 76 mm × 76 mm × 42.1 mm (3.0″ × 3.0″ × 1.7″) |
| Weight | Approx. 320 g (0.7 lb.) |
| Certification | CE-EMC, KC, UL |
| Compatibility | Camera Link V1.2, GenICam |
| Max line rate | 20 kHz (Base), 40 kHz (Medium), 80 kHz (Full), 100 kHz (80-bit) |
| Line length | 8192 |
| Scan type | Supports 1-line, 2-TDI |
Selection and applications
8K Camera Link surface inspection. Two-row mono web scanning. 2-TDI acquisition with an 8192 × 2 array.
Minimum kit: Pair the MV-CL082-92CM with an M72*0.75 line-scan lens or adapted F-mount optic, a Camera Link cable and frame grabber, and a 12 V DC to 24 V DC source on the 12-pin P10 connector.
Nearby in the range: MV-CL081-41CM — Prefer it for a single-row 8192-pixel line at up to 80 kHz.; MV-CL082-91F1M — Prefer it for 8192 × 2 capture over an LC fiber link.; MV-CL084-91CM — Prefer it when the Camera Link sensor must add 4-TDI..
Cables and accessories for this model
Compatibility per manufacturer data.
- Data cables
- Camera Link
- I/O & power cables
- 12-pin IO
- Power
- Power
- Mounting
- Camera mounts
FAQ
How fast is MV-CL082-92CM in each Camera Link configuration?
The specified maxima are 20 kHz in Base, 40 kHz in Medium, 80 kHz in Full and 100 kHz in 80-bit operation. The frame grabber and cable setup must support the selected configuration for the complete 8192-pixel line.
What scan modes are available from the MV-CL082-92CM sensor?
The 8192 × 2 mono CMOS array supports 1-line and 2-TDI acquisition. Pixel pitch is 7 µm, exposure can be set from 3 µs to 10 ms, and dynamic range is listed as 63.4 dB.
How should an F-mount lens be fitted to MV-CL082-92CM?
The camera has an M72*0.75 native mount with a 12 mm flange back length. An F-mount lens may be attached through an adapter, with optical coverage selected for all 8192 pixels and resolving ability matched to 7 µm pixels.
Which power and control connections does MV-CL082-92CM expose?
Provide 12 V DC to 24 V DC through the 12-pin P10 connector and allow for 9.8 W typical consumption at 12 V DC. Four configurable single-ended or differential I/O lines and Camera Link CC1/CC2/CC3/CC4 are available.
What is the operating envelope of the MV-CL082-92CM body?
The 76 mm × 76 mm × 42.1 mm housing works from -20 °C to 55 °C at 5% RH to 90% RH without condensation. Storage extends from -30 °C to 80 °C, and IP40 applies under proper lens installation and wiring.