Line scan camera · CL Series
Hikrobot MV-CL084-91F2M
- Warranty
- 36 months
Multi-light 8K mono capture over fiber
An 8192 × 4 mono CMOS sensor, 2LC fiber transport and multi-light control shape MV-CL084-91F2M. Its 7 × 7 µm pixels support 1-Line, 2-TDI and 4-TDI. With 1 light, the camera reaches 200 kHz in 1-Line, 100 kHz in 2-TDI and 50 kHz in 4-TDI, giving a wide range of speed and row-integration choices on one fiber-linked platform.
The lighting sequencer can also separate surface response under multiple illumination states. At 2 lights it provides 52 kHz in 1-Line or 26 kHz in 2-TDI; 3-light 1-Line reaches 34.6 kHz, and 4-light 1-Line reaches 26 kHz. Four configurable I/O signals on the 12-pin P10 connector support single-ended or differential timing for coordinating the moving material and light sequence.
MV-CL084-91Y2M matches the 8192 × 4 sensor geometry, 7 µm pitch, scan modes and multi-light rate table but sends data through two CXP-10 Micro-BNC connections and supports PoCXP. MV-CL084-91CM uses Camera Link and 5 µm pixels, reaching 100 kHz in 80-bit mode. MV-CL082-91F2M retains the 2LC link and 200 kHz maximum, uses an 8192 × 2 array and supports 1-Line and 2-TDI.
Available versions
One device, different revisions. We ship the current one by default; if a specific revision is already installed on your line, name it in the request and we will match it.
| Part number | PN | Version | |
|---|---|---|---|
| MV-CL084-91F2M discontinued | 306302543 | — | |
| MV-CL084-91F2M V2.0 | 306303821 | V2.0 |
Specifications
| Product type | 8192 px Fiber Line Scan Camera |
| Sensor type | CMOS |
| Resolution | 8192 × 4 |
| Pixel size | 7 μm × 7 μm |
| Mono color | Mono |
| Dynamic range | 63.4 dB |
| Exposure time | 3 μs to 10 ms |
| Gain | 1.0 × |
| Data interface | 2LC fiber connector |
| Digital I/O | 12-pin P10 connector provides power and I/O: Configurable input/output × 4 (Line 0/1/3/4) and single-ended/differential is supported. |
| Lens mount | M72*0.75, flange back length 12 mm, applicable to F-mount via lens adapter |
| Power supply | 12 VDC to 24 VDC |
| Power consumption | Typ. 15.4 W @ 24 VDC |
| Ingress protection | IP40 (under proper lens installation and wiring) |
| Operating temperature | –20 °C to 50 °C (–4 °F to 122 °F) |
| Storage temperature | –30 °C to 80 °C (–22 °F to 176 °F) |
| Humidity | 5% RH to 90% RH (no condensation) |
| Dimensions | 132 mm × 76 mm × 57.4 mm (5.2″ × 3.0″ × 2.3″) |
| Weight | Approx. 600 g (1.3 lb.) |
| Certification | CE-EMC, KC |
| Compatibility | XoFLink, GenICam |
| Max line rate | 1-light mode: 200 kHz (1-Line), 100 kHz (2-TDI), 50 kHz (4-TDI) 2-light mode: 52 kHz (1-Line), 26 kHz (2-TDI) 3-light mode: 34.6 kHz (1-Line) 4-light mode: 26 kHz (1-Line) |
| Line length | 8192 |
| Scan type | Supports multi-light control: 1/2/3/4 light(s) Supports 1-Line, 2-TDI, 4-TDI |
Selection and applications
8K multi-light fiber inspection. 4-TDI mono web scanning. Single-light capture at 200 kHz.
Minimum kit: Use the MV-CL084-91F2M camera, an M72*0.75 line-scan lens or adapted F-mount optic, a 2LC fiber cable and receiver, and a 12 V DC to 24 V DC supply through the 12-pin P10 connector.
Nearby in the range: MV-CL084-91Y2M — Prefer it for matching multi-light rates over two CXP-10 interfaces.; MV-CL084-91CM — Prefer it for 5 µm pixels and Camera Link transport.; MV-CL082-91F2M — Prefer it for a simpler 8192 × 2 fiber sensor at 200 kHz..
Cables and accessories for this model
Compatibility per manufacturer data.
- I/O & power cables
- 12-pin IO
- Power
- Power
- Mounting
- Camera mounts
FAQ
Which 1-light rates are available from MV-CL084-91F2M?
With 1-light operation, the camera reaches 200 kHz in 1-Line, 100 kHz in 2-TDI and 50 kHz in 4-TDI. All three modes use the 8192 × 4 mono array and transfer through the 2LC fiber connector.
How fast are the multi-light modes on MV-CL084-91F2M?
At 2 lights the model reaches 52 kHz in 1-Line and 26 kHz in 2-TDI. The 3-light 1-Line maximum is 34.6 kHz, and the 4-light 1-Line maximum is 26 kHz, so the lighting sequence sets the available line rate.
What power and I/O cable is needed for MV-CL084-91F2M?
Use the 12-pin P10 connection for 12 V DC to 24 V DC power and four configurable I/O lines. Typical consumption is 15.4 W at 24 V DC. The timing lines support single-ended or differential signals, separate from 2LC image transfer.
How should optics cover the MV-CL084-91F2M sensor?
The native interface is M72*0.75 with a 12 mm flange back length, and F-mount lenses can be installed through an adapter. Coverage must extend across the 8192-pixel line and resolve the 7 × 7 µm pixels.
What differs between MV-CL084-91F2M and MV-CL084-91Y2M?
Their 8192 × 4 mono arrays, 7 µm pixels, scan modes and multi-light rates match. MV-CL084-91F2M uses a 2LC fiber connector, while MV-CL084-91Y2M uses two CXP-10 Micro-BNC interfaces and supports PoCXP on CXP-0 and CXP-1.