Line scan camera · CL Series
Hikrobot MV-CL083-92CC
- Lead time
- from 5 days
- Warranty
- 36 months
Camera Link color scanning across 8K
An 8192 × 3 color CMOS line and Camera Link transport define MV-CL083-92CC. The 7 × 7 µm pixels operate at 10.1 kHz in Base, 20.2 kHz in Medium and 33.7 kHz in 80-bit configuration at full line length. Reducing the region of interest to 4140 pixels or below raises the line rate to 66.6 kHz. A USB connection is provided for firmware updating.
Full-width operation suits wide print, coating or color-feature inspection where an existing Camera Link frame grabber is used and cross-object coverage takes priority over travel speed. The reduced-width mode serves faster narrow zones on the same machine. The 12-pin P10 connection provides 12 V DC to 24 V DC power and four configurable I/O lines, supplemented by Camera Link CC1/CC2/CC3/CC4 timing paths.
MV-CL083-91F2C keeps the 8192 × 3 color sensor geometry but transfers through a 2LC fiber connector at 66.6 kHz over the full line. MV-CL083-B0F2C is another 2LC color option and reaches 71 kHz, though it does not support digital I/O. MV-CL084-B1NC changes to 2.5 Gigabit Ethernet and reaches 37.6 kHz in full-resolution Mono 8/Bayer RG 8 or 42 kHz after reducing width to 2448 pixels or below.
Available versions
One device, different revisions. We ship the current one by default; if a specific revision is already installed on your line, name it in the request and we will match it.
| Part number | PN | Version | |
|---|---|---|---|
| MV-CL083-92CC discontinued | 306301832 / 306301833 | — | |
| MV-CL083-92CC V2.0 | 306303833 / 306303834 | V2.0 |
Specifications
| Sensor resolution | 8192 px; 8192×3 px |
| Maximum line rate | 10100 Hz @ Base, at full resolution; 20200 Hz @ Medium, at full resolution; …Collapse10100 Hz @ Base, at full resolution; 20200 Hz @ Medium, at full resolution; 33700 Hz @ 80-bit (Deca), at full resolution; 66600 Hz @ in ROI mode, ROI width up to 4140 px |
| Line/TDI image mode | single line |
| Color mode | color |
| Lens mount | M72×0.75 |
| Data interface | Camera Link |
| Sensor technology | CMOS |
| Pixel size | 7×7 µm |
| Dynamic range | 63.4 dB |
| Signal-to-noise ratio | 40.8 dB |
| Exposure time | 3…10000 µs |
| Auto exposure | Auto, Off, Once, trigger width, fixed exposure time |
| Linear gain factor | 1 |
| Pixel format | Mono8, Mono12, RGB8, BGR8 |
| Binning | 1x1, 2x2, 4x4 |
| Trigger mode | external, internal; line, frame, line and frame @ external trigger |
| Flange focal distance | 12 mm |
| Data interface connector | Camera Link SDR ×2; Micro USB2.0 USB 2.0 |
| Protocol compatibility | Camera Link, GenICam |
| Communication protocol versions | Camera Link 1.2 |
| Third party software protocol | Camera Link |
| Client software | MVS |
| Operating systems | Windows 7 (32/64-bit), Windows 10 (32/64-bit), Windows 11 (32/64-bit) |
| Digital I/O lines | 4 bidirectional lines, single-ended, differential, lines 0, 1, 3, 4 |
| Digital I/O connector | P10 12-pin |
| Power supply | 12…24 V |
| Power delivery | external power supply |
| Power consumption | 9.9 W (typical) @ DC, supply voltage 12 V |
| Ingress protection | IP40 @ with lens and cables properly installed |
| Working temperature | -20…55 °C |
| Storage temperature | -30…80 °C |
| Humidity | 5…90 % @ non-condensing |
| Dimensions | 76×76×42.1 mm |
| Weight | 340 g (approx.) |
| Certification | CE, RoHS2.0, KC |
| Camera Link configuration | Base, Medium, 80-bit |
| Mounts via adapter | F-mount (via adapter) |
| Camera link control lines | CC1, CC2, CC3, CC4 |
| Pixel clock | 40000000 Hz; 66000000 Hz; 80000000 Hz; 85000000 Hz |
| Port inventory | Camera Link ×2 (data), USB 2.0 (firmware update) |
| Power supply connector | P10 12-pin |
| Reverse image | horizontal |
| Tap count | 1; 2; 10 |
| Tap geometry | 1X, 1X2, 1X10 |
Documents
Selection and applications
8K Camera Link color inspection. Full-width three-row scanning. Reduced-width capture at 66.6 kHz.
Minimum kit: Install the MV-CL083-92CC with an M72*0.75 line-scan lens or adapted F-mount optic, a Camera Link cable and frame grabber, and a 12 V DC to 24 V DC supply on the 12-pin P10 connector.
Nearby in the range: MV-CL083-91F2C — Prefer it for 66.6 kHz full-width color capture through 2LC fiber; MV-CL083-B0F2C — Prefer it for a 71 kHz 2LC color line without digital I/O; MV-CL084-B1NC — Prefer it for an 8192 × 3 color line over 2.5 Gigabit Ethernet.
Cables and accessories for this model
Compatibility per manufacturer data.
- Data cables
- Camera Link
- I/O & power cables
- 12-pin IO
- Power
- Power
- Mounting
- Camera mounts
FAQ
What are the full-line Camera Link rates of MV-CL083-92CC?
At the complete 8192-pixel width, Base reaches 10.1 kHz, Medium reaches 20.2 kHz and 80-bit operation reaches 33.7 kHz. The camera uses a three-row color CMOS array with 7 µm pixels.
How does MV-CL083-92CC reach a line rate of 66.6 kHz?
The 66.6 kHz maximum requires a reduced region of interest at 4140 pixels or below. It should be treated separately from the full-width 8192-pixel rates, whose highest listed value is 33.7 kHz in 80-bit operation.
Which lens mount and adapter suit the MV-CL083-92CC sensor line?
The camera uses an M72*0.75 mount with a 12 mm flange back length. An F-mount lens may be attached through an adapter, with coverage and resolving performance chosen for the 8192 × 3 color array and 7 µm pixels.
What power and timing connections are available on MV-CL083-92CC?
Supply 12 V DC to 24 V DC through the 12-pin P10 connection; typical draw is 9.9 W at 12 V DC. Four configurable single-ended or differential I/O lines are provided, and Camera Link adds CC1/CC2/CC3/CC4.
How does fiber-linked MV-CL083-91F2C compare with MV-CL083-92CC?
Both have 8192 × 3 color sensors with 7 µm pixels. MV-CL083-91F2C uses a 2LC fiber connector and reaches 66.6 kHz at full width; MV-CL083-92CC uses Camera Link and needs a 4140-pixel or narrower region to reach 66.6 kHz.