Line scan camera · CL162 series
Hikrobot MV-CL162-91F2M
- Lead time
- from 5 days
- Warranty
- 36 months
Two-link fiber mono capture
A 16384 × 2 monochrome CMOS sensor and selectable 1 Link or 2 Link fiber transmission make MV-CL162-91F2M a full-width, dual-link acquisition option. Its 3.5 × 3.5 μm pixels support 1-Line and 2-TDI modes. The camera's maximum line rate is 73.2 kHz. Pixel formats include Mono 8, Mono 10 and Mono 12, allowing bit depth and TDI mode to be selected around the same 2LC fiber connector.
Exposure is adjustable from 3 μs to 10 ms, gain is 1.0 ×, dynamic range is 56.7 dB and SNR is 37 dB. Four configurable input/output lines, identified as Line 0, Line 1, Line 3 and Line 4, are available. Supply range is 12 to 24 VDC and consumption is 10.6 W at 24 VDC. The M72*0.75-mounted housing measures 132 × 76 × 57.4 mm, weighs 600 g and is rated IP40 from -20 to 50 °C.
MV-CL162-91F2M shares its resolution, pixel size and scan modes with MV-CL162-B0F2M, but the B0 model raises maximum rate from 73.2 kHz to 105 kHz and lists 61.7 dB dynamic range. MV-CL162-91F1M uses a single LC fiber interface; it reaches the same 73.2 kHz in standard 1-Line mode and offers 120 kHz after ROI at 9984 pixels or below. MV-CL162-91CM instead uses Camera Link and provides explicit binning and ROI rate paths.
Available versions
One device, different revisions. We ship the current one by default; if a specific revision is already installed on your line, name it in the request and we will match it.
| Part number | PN | Version | |
|---|---|---|---|
| MV-CL162-91F2M | 306302429 | — | |
| MV-CL162-91F2M V2.0 | 306303838 | V2.0 |
Specifications
| Sensor resolution | 16384×2 px |
| Maximum line rate | 73200 Hz @ 1-line, links 1; 60000 Hz @ 2-line TDI, links 1; 120000 Hz @ 1-line, links 2; 60000 Hz @ 2-line TDI, links 2 |
| Line/TDI image mode | single line, 2-TDI |
| Color mode | mono |
| Lens mount | M72×0.75 |
| Data interface | XoFLink |
| Sensor technology | CMOS |
| Pixel size | 3.5×3.5 µm |
| Exposure time | 3…10000 µs |
| Auto exposure | Auto, Off, Once, trigger width |
| Linear gain factor | 1 |
| Pixel format | Mono8, Mono10, Mono12 |
| Binning | 1x1, 1x2, 1x4, 2x1, 2x2, 2x4, 4x1, 4x2, 4x4 |
| Trigger mode | external, internal; line, frame, line and frame @ external trigger |
| Flange focal distance | 12 ±0.15 mm |
| Client software | MVS |
| Operating systems | Windows 7 (32/64-bit), Windows 10 (32/64-bit), Windows 11 (64-bit) |
| Digital I/O lines | 4 bidirectional lines, single-ended, differential, lines 0, 1, 3, 4 |
| Digital I/O connector | P10 12-pin |
| Power delivery | external power supply1 |
| Cooling | natural cooling1 |
| Ingress protection | IP40 @ with lens and cables properly installed |
| Working temperature | -20…50 °C |
| Storage temperature | -30…80 °C |
| Humidity | 5…90 % @ non-condensing |
| Dimensions | 132×76×57.4 mm |
| Weight | 600 g (approx.) |
| Certification | CE, RoHS, KC |
| Mounts via adapter | F-mount (via adapter) |
| Transmission mode | one link, two links |
| Compatible products | MV-GS1002F (optical module not included); MV-AC10G-SFP; MV-AC10G-2LC-2LC-ST1 |
| Power supply connector | P10 12-pin |
| Reverse image | horizontal |
| Part number | Dynamic range | Signal-to-noise ratio | Power supply | Protocol compatibility | Data interface connector |
|---|---|---|---|---|---|
MV-CL162-91F2MAll specifications
| 56.7 dB | 37 dB | 12…24 V | XoFLink, GenICam | LC 2LC |
MV-CL162-91F2M V2.0All specifications
| 62 dB | 39.2 dB | 12…24 V @ DC | GenICam | LC ×2, 2 fibers, duplex |
1 not stated for all variants
Documents
Selection and applications
16384-pixel 2-TDI inspection. Dual-link monochrome fiber capture. Mono 12 surface scanning.
Minimum kit: Use MV-CL162-91F2M with an M72*0.75 lens for its 16384-pixel line, a cable for the 2LC fiber connector, and a 12 to 24 VDC supply sized for 10.6 W at 24 VDC.
Nearby in the range: MV-CL162-B0F2M — Select it for the same 16384 × 2 modes with a higher 105 kHz maximum; MV-CL162-91F1M — Select it for a single LC fiber interface and 120 kHz reduced-width ROI mode; MV-CL162-91CM — Select it when the 16384 × 2 acquisition chain must use Camera Link.
Cables and accessories for this model
Compatibility per manufacturer data.
- Power
- Power
- Mounting
- Camera mounts
FAQ
Which link and image modes can MV-CL162-91F2M combine?
Transmission can use 1 Link or 2 Link through the 2LC fiber connector. Image acquisition can be set to 1-Line or 2-TDI on the 16384 × 2 monochrome sensor.
What monochrome output formats are listed for MV-CL162-91F2M?
The available pixel formats are Mono 8, Mono 10 and Mono 12. Maximum line rate is 73.2 kHz, and the 16384 × 2 sensor uses 3.5 × 3.5 μm pixels in 1-Line or 2-TDI.
How are external signals exposed by MV-CL162-91F2M?
Four configurable inputs or outputs are listed: Line 0, Line 1, Line 3 and Line 4. This I/O accompanies the separate 2LC fiber image interface and its 1 Link or 2 Link transmission.
What power and exposure limits apply to MV-CL162-91F2M?
Supply range is 12 to 24 VDC, with consumption of 10.6 W at 24 VDC. Exposure can be set from 3 μs to 10 ms, the listed gain is 1.0 ×, and dynamic range is 56.7 dB.
Which housing and lens provisions suit MV-CL162-91F2M?
The body is 132 × 76 × 57.4 mm, weighs 600 g and uses an M72*0.75 lens mount. It is rated IP40 and works from -20 to 50 °C at a permitted humidity of 5 to 90 % RH.