Area camera · CS series
Hikrobot MV-CS028-10UM
- Lead time
- from 5 days
- Warranty
- 36 months
Resolution-speed balance and applications
A 1936 × 1464 image at up to 132.2 fps places MV-CS028-10UM between low-resolution high-speed capture and slower high-detail inspection. Its 2/3-inch Sony IMX421 CMOS sensor has a global shutter and 4.5 × 4.5 µm pixels. USB3.0 carries the image stream, with USB2.0 interoperability available for host connection.
This combination fits moving-part inspection, orientation checks and feature tracking where both frame cadence and a multi-axis pixel grid matter. The C-mount supports optics for the 2/3-inch sensor. A 29 × 29 × 30 mm, 80 g IP40 body works from -30 to 60 °C. One isolated input, one isolated output and one bidirectional I/O provide electrical connection to machine events.
MV-CU020-90UM runs slightly faster at 150.2 fps and uses 2048 × 1200 resolution, trading vertical pixels for a wider image shape. MV-CA016-10UC reaches 249.1 fps at 1440 × 1080, while MV-CS050-10UM increases detail to 2448 × 2048 but runs at 60 fps. MV-CS028-10UM is the intermediate choice when 1936 × 1464 detail and a rate up to 132.2 fps are both required.
Specifications
| Shutter | global |
| Sensor model | Sony® IMX421 |
| Nominal optical sensor format | 2/3″ |
| Sensor resolution | 1936×1464 px |
| Maximum frame rate | 132.2 fps @ resolution 1936×1464 px |
| Color mode | mono |
| Lens mount | C-mount |
| Data interface | USB 3.0 |
| Sensor technology | CMOS |
| Pixel size | 4.5×4.5 µm |
| Dynamic range | 71.1 dB |
| Signal-to-noise ratio | 43.6 dB |
| Exposure time | 1…5 µs @ ultra-short exposure mode; 9…10000000 µs @ standard exposure mode |
| Auto exposure | Off, Once, Continuous |
| Gain | 0…24 dB |
| Pixel format | Mono8, Mono10, Mono10Packed, Mono12, Mono12Packed |
| Binning | 1x1, 2x2 |
| Decimation | 1x1, 2x2 |
| USB 2.0 compatibility | yes |
| Protocol compatibility | USB3 Vision, GenICam |
| Third party software protocol | USB3 Vision |
| Client software | MVS |
| Operating systems | Windows 7 (32/64-bit), Windows 10 (32/64-bit), Linux (32/64-bit) |
| Digital I/O lines | 1 input, opto-isolated, line 0; 1 output, opto-isolated, line 1; 1 bidirectional line, non-isolated, line 2 |
| Digital I/O connector | P7 6-pin |
| Power supply | 9…24 V @ DC, external power supply |
| Power delivery | external power supply, USB |
| Power consumption | 2.8 W (typical) @ DC, USB 3.0, supply voltage 5 V |
| Ingress protection | IP40 |
| Working temperature | -30…60 °C |
| Storage temperature | -30…70 °C |
| Humidity | 20…95 % @ non-condensing |
| Dimensions | 29×29×30 mm |
| Weight | 80 g (approx.) |
| Certification | CE, RoHS, KC |
| Reverse image | horizontal, vertical |
Documents
Selection and applications
Moving-part feature tracking. High-rate orientation checks. Machine-signal I/O connection.
Minimum kit: The minimum kit is MV-CS028-10UM, a C-mount lens, a USB3.0 cable, and a 9–24 V DC power supply.
Nearby in the range: MV-CU020-90UM — Prefer it for 2048 × 1200 resolution at up to 150.2 fps; MV-CA016-10UC — Prefer it when the 249.1 fps ceiling outweighs its lower 1440 × 1080 resolution; MV-CS050-10UM — Prefer it when 2448 × 2048 detail matters more than a rate above 60 fps.
Cables and accessories for this model
Compatibility per manufacturer data.
- Power
- Power
- Mounting
- Camera mounts
FAQ
How does MV-CS028-10UM balance resolution against speed?
The camera combines 1936 × 1464 resolution with a maximum rate of 132.2 fps. It therefore retains more spatial samples than the lower-resolution high-speed models while sustaining a three-digit full-frame acquisition rate.
Why is the IMX421 global shutter relevant to inspection?
The Sony IMX421 is specified as a CMOS global-shutter sensor. A simultaneous frame exposure supports geometric and position measurements on moving parts, while its pixel pitch is 4.5 × 4.5 µm.
What external power arrangement does this USB camera require?
The data interface is USB3.0 with USB2.0 interoperability, while the stated power input is 9–24 V DC and consumption is 2.8 W. Plan the data cable and DC power connection as separate parts of the installation.
Which optical format matches the 2/3-inch sensor area?
Fit a C-mount lens with an image circle that covers the 2/3-inch sensor. Optical resolution, focal length and working distance should be chosen around the 1936 × 1464 sampling grid and required object field.
What electrical I/O and environmental limits are available?
The camera provides one opto-isolated input, one opto-isolated output and one bidirectional non-isolated I/O. Its IP40 housing is specified from -30 to 60 °C and for 20–95% RH.