Area camera · CU series
Hikrobot MV-CU020-90UM
- Warranty
- 36 months
Wide-frame acquisition and positioning
A 2048 × 1200 global-shutter image at 150.2 fps shapes the use case for MV-CU020-90UM. Its GMAX4002 CMOS sensor has a 1/1.7-inch format and 4 × 4 µm pixels. USB3.0 carries the full image stream and can interoperate with USB2.0, while USB3 Vision and GenICam define the stated camera interface framework.
The wide pixel grid and three-digit frame rate support lateral feature tracking, moving-web observation and inspection of parts spread across a broad field. Exposure is adjustable from 4 µs to 10 sec, and gain spans 0–11.1 dB. The 29 × 29 × 30 mm, 80 g body uses C-mount optics, provides three digital I/O lines through a 6-pin P7 connector and consumes 1.9 W.
MV-CS028-10UM has a taller 1936 × 1464 image and a lower 132.2 fps ceiling. MV-CA016-10UC raises speed to 249.1 fps while reducing resolution to 1440 × 1080, whereas MV-CS050-10UM increases detail to 2448 × 2048 at 60 fps. Select MV-CU020-90UM for the 2048 × 1200 shape and 150.2 fps balance between these faster and higher-resolution options.
Specifications
| Sensor type | CMOS, global shutter |
| Sensor model | GMAX4002 |
| Sensor format | 1/1.7″ |
| Resolution | 2048 × 1200 px |
| Pixel size | 4 × 4 µm |
| Maximum frame rate | 150.2 fps |
| Dynamic range | 66.9 dB |
| Exposure time | 4 µs to 10 sec |
| Gain | 0 to 11.1 dB |
| Data interface | USB3.0, compatible with USB2.0 |
| Digital I/O | 6-pin P7 connector; opto-isolated input ×1 (Line 0), opto-isolated output ×1 (Line 1), bi-directional non-isolated I/O ×1 (Line 2) |
| Lens mount | C-mount |
| Power supply | 9 to 24 VDC |
| Power consumption | 1.9 W @ 5 VDC |
| Power consumption typical | 1.9 W |
| Ingress protection | IP30 |
| Operating temperature | 0 to 50 °C |
| Storage temperature | -30 to 80 °C |
| Humidity | 20 to 95 % RH |
| Dimensions | 29 × 29 × 30 mm |
| Weight | 80 g |
| Compatibility | USB3 Vision, GenICam |
| Client software | MVS or third-party software meeting with USB3 Vision Protocol |
Selection and applications
Wide-field feature tracking. Moving-web observation. High-rate lateral inspection.
Minimum kit: The minimum kit is MV-CU020-90UM, a C-mount lens, a USB3.0 cable, and either USB power or a 9–24 V DC supply.
Nearby in the range: MV-CS028-10UM — Prefer it for a taller 1936 × 1464 image at up to 132.2 fps.; MV-CA016-10UC — Prefer it when 249.1 fps is required at 1440 × 1080 resolution.; MV-CS050-10UM — Prefer it for 2448 × 2048 detail when 60 fps is sufficient..
Cables and accessories for this model
Compatibility per manufacturer data.
- Data cables
- USB 3.0
- Power
- Power
- Mounting
- Camera mounts
FAQ
What inspection profile suits the 2048 × 1200 image format?
The camera combines a wide 2048 × 1200 grid with 150.2 fps and a global shutter. This profile supports lateral feature tracking, moving-web observation and rapid inspection where horizontal coverage is significant.
What exposure and gain controls are stated for MV-CU020-90UM?
Exposure can be set from 4 µs to 10 sec, and gain is specified from 0 to 11.1 dB. Those ranges allow timing and signal amplification to be adjusted around motion, illumination and the required acquisition rate.
Which software and interface protocols can operate the camera?
The camera lists MVS or third-party software meeting the USB3 Vision protocol. USB3 Vision and GenICam are stated, and the physical data link is USB3.0 with USB2.0 interoperability.
How can MV-CU020-90UM be powered in a compact station?
The camera accepts 9–24 V DC and supports power through USB. Typical consumption is 1.9 W, with a listed 5 V DC operating point. This permits either host-side USB power or a separate DC arrangement.
What lens and environmental limits should integration use?
Use a C-mount lens covering the 1/1.7-inch sensor. The IP30 camera operates from 0 to 50 °C and 20–95% RH, measures 29 × 29 × 30 mm, and weighs 80 g in total.