3D laser profile sensor · DP2000 series Laser Profiler
Hikrobot MV-DP2062
- Lead time
- from 5 days
- Warranty
- 36 months
Submicron repeatability at line speed
A stated 0.30 µm repeatability distinguishes MV-DP2062 within its 11 mm Z range. At a 61.5 mm working distance, the X field runs from 18 mm near through 19 mm at reference to 20 mm far. The sensor records 3200 points per profile, resolves 0.94 to 1.22 µm along Z and operates from 1.7 to 23.9 kHz in high-frame-rate mode.
This narrow field is suited to fine height, edge and surface checks where a compact target region must be sampled densely. Gigabit Ethernet transfers the profiles, while a 12-pin M12 interface supplies 24 VDC and carries isolated and differential I/O. The IP67 enclosure can operate from 0 to 45 °C, supporting line-side measurements without a separate clean-room housing.
MV-DP2062 and MV-DP3062 share the 11 mm range, 19 mm reference field and 0.30 µm repeatability; MV-DP3062 raises the high-frame-rate ceiling from 23.9 to 46.7 kHz. MV-DP2020 offers finer 0.22 µm repeatability but works at 21.4 mm with a 14.3 mm reference field. Choose MV-DP2062 for the 61.5 mm standoff and 23.9 kHz class, or shift according to speed or tighter geometry.
Overview
A DP2000 series laser profiler — the base class: the sensor projects a laser line across the part and measures height at every point of the section, up to 3200 points per profile.
Working distance 61.5 mm, measurement range 11 mm.
Used where a profile is needed rather than a picture: weld bead control, adhesive bead height, gap and flush, warpage, parcel volume. Data goes to VM3D or 3DMVS, and to third-party software over a standard protocol.
Specifications
| Data interface | GigE (Fast Ethernet compatible) |
| 3D scan rate | 1700…23900 Hz @ high frame rate mode |
| Depth measurement range | 11 mm |
| Points per profile | 3200 |
| Reference distance | 61.5 mm |
| Reference field of view | 19 mm |
| Z repeatability | 0.3 µm (average) |
| Z resolution | 0.94…1.22 µm |
| Trigger mode | software, hardware, encoder |
| Laser safety class | 3B |
| Wavelength | 405 nm |
| Client software | 3DMVS, VM3D |
| Operating systems | Windows 7 (32/64-bit), Windows 10 (32/64-bit), Windows 11 (64-bit) |
| Digital I/O lines | 2 inputs, opto-isolated, lines 0, 9; 2 inputs, differential, lines 3, 6; 1 output, differential, line 1 |
| Digital output count | 1 |
| Digital I/O connector | M12 12-pin |
| Power supply | 24 V |
| Power delivery | external power supply |
| Power consumption | 15.2 W (typical) @ DC, supply voltage 24 V |
| Ingress protection | IP67 |
| Working temperature | 0…45 °C |
| Storage temperature | -30…80 °C |
| Humidity | 20…85 % |
| Dimensions | 136.5×120×60.5 mm |
| Weight | 1080 g (approx.) |
| Far field of view | 20 mm |
| Near field of view | 18 mm |
| Operating environment | non-condensing |
| Output data type | profile, depth image, brightness image |
| Profile data interval | 5.5…6.5 µm |
| Z linearity | -0.01…0.01 % @ % of measurement range |
| Recommended system CPU | Intel Core i5 |
| System memory required | ≥8 GB |
| Trigger signalling | differential @ differential, external trigger, encoder trigger |
Documents
Selection and applications
Fine height inspection with 0.30 µm repeatability. Dense contour capture across a 19 mm reference field. 3200-point profiling from 1.7 to 23.9 kHz.
Minimum kit: MV-DP2062, a Gigabit Ethernet cable, a 12-pin M12 power and I/O cable, a 24 VDC supply, and a 3DMVS, VM3D or third-party software host form the minimum acquisition kit.
Nearby in the range: MV-DP3062 — Prefer it when the same 11 mm geometry must be scanned at up to 46.7 kHz; MV-DP2020 — Prefer it for 0.22 µm repeatability at a shorter 21.4 mm working distance.
Cables and accessories for this model
Compatibility per manufacturer data.
- Other
- 3D accessories
FAQ
Where does the 0.30 µm repeatability of MV-DP2062 apply?
The 0.30 µm value is stated for gauge-block testing on an optical platform. Across the working envelope, Z resolution ranges from 0.94 to 1.22 µm and the X sampling interval from 5.5 to 6.5 µm, with 3200 points in each profile.
What field dimensions must the MV-DP2062 target remain inside?
The height range is 11 mm around a 61.5 mm working distance. Lateral coverage is 18 mm at the near boundary, 19 mm at reference and 20 mm at the far boundary, defining a compact measurement volume for the fixture and part path.
How fast can MV-DP2062 acquire its 3200-point profiles?
The high-frame-rate range is 1.7 to 23.9 kHz. Profiles are sent through 1000 Mbit/s Gigabit Ethernet, with 100 Mbit/s Fast Ethernet compatibility. The chosen network and rate should reflect the required profile density along the moving surface.
What I/O channels are available on the MV-DP2062 M12 connection?
The 12-pin M12 interface provides two opto-isolated inputs, two differential inputs and one differential output. It also carries the 24 VDC supply. Typical power consumption is 15.2 W at that supply voltage.
Which ambient conditions and enclosure rating apply to MV-DP2062?
MV-DP2062 is rated IP67 and works from 0 to 45 °C. Its storage interval is -30 to 80 °C, with allowable humidity from 20 to 85% RH when condensation is absent. The housing is 136.5 × 120 × 60.5 mm and weighs about 1080 g.
How does MV-DP2062 differ from the faster MV-DP3062?
Both list an 11 mm Z range, 61.5 mm working distance, 19 mm reference field, 3200 profile points and 0.30 µm repeatability. MV-DP2062 reaches 23.9 kHz, while MV-DP3062 extends the high-frame-rate range to 46.7 kHz.