Frame grabber · GE Series
Hikrobot MV-GE2202
- Warranty
- 36 months
Two-port WX1860 acquisition path
A WX1860 chip, two GigE camera interfaces and 2 W consumption characterize MV-GE2202 as a low-draw dual-port acquisition NIC. Both RJ45 connections accept 10/100/1000 Mbit/s links, and the card supports two streams with 9.5 KB jumbo frames. PCI-E gen2 × 4 provides a gen2 × 2 link to the host, where transfer is rated at 860 MB/s maximum and 800 MB/s sustained.
The dual-port card fits a paired-camera station that benefits from dedicated Ethernet links and passive cooling. Its 181 × 126.3 × 21.6 mm board weighs 190 g and operates by natural cooling from 0 to 60 °C. Windows 7, 64-bit Windows 10 and Linux are listed, allowing the same two-stream topology on either host family. The 800 MB/s sustained figure defines the shared host path for those streams.
MV-GE2202L preserves the WX1860 chip, two ports, 9.5 KB jumbo frames, 2 W draw and 800 MB/s sustained rate, but changes the dimensions to 161.4 × 79.3 × 23.23 mm and uses PCI-E gen2 × 4. MV-GE2202P keeps the 181 × 126.3 × 21.6 mm outline and provides 15.4 W PoE per channel. MV-GE2204 doubles the port and stream count to four while increasing board consumption to 3 W.
Specifications
| Camera ports | RJ45 × 2 |
| Cameras supported | 2 max |
| Camera connection speed | 10/100/1000 Mbps |
| Camera type supported | GigE industrial camera |
| Interconnect | PCI-E gen2 × 4, PCI-E gen2 × 2 link |
| Delivery bandwidth | 860 MB/s (max. transmission bandwidth), 800 MB/s (sustained transmission bandwidth) |
| Sustained transmission bandwidth | 800 MB/s |
| Power consumption | 2 W |
| Operating temperature | 0 to 60 °C |
| Storage temperature | -30 to 70 °C |
| Humidity | 10% to 95% RH |
| Dimensions | 181 × 126.3 × 21.6 mm |
| Weight | 190 g |
| Certification | CE-EMC,KC |
| Main chip | WX1860 chip |
| Camera interface standard | IEEE 802.3 |
| Stream | 2 |
| Jumbo frame | 9.5 KB |
| Cooling mode | Natural cooling |
| Supported OS | Windows 7, 64-bit Windows 10, Linux |
Selection and applications
Two-stream GigE acquisition. Low-draw camera networking. Jumbo-frame paired-camera intake.
Minimum kit: Combine MV-GE2202 with a PCI-E gen2 host, one or two GigE industrial cameras, RJ45 network cables and the camera-power connections required by the selected devices.
Nearby in the range: MV-GE2202L — Prefer it for the 161.4 × 79.3 × 23.23 mm compact board outline.; MV-GE2202P — Prefer it when each of the two camera links needs 15.4 W PoE.; MV-GE2204 — Prefer it when four RJ45 ports and four streams are required..
Cameras that connect to this board
RJ45 × 2 · up to 2 cameras · 860 MB/s:
Matched by interface and port count.
FAQ
Which network controller is identified for MV-GE2202?
The board uses a WX1860 chip. It connects as many as two GigE industrial cameras through RJ45 ports, supports two streams and accepts 9.5 KB jumbo frames.
What host transfer figures are stated for MV-GE2202?
MV-GE2202 provides 860 MB/s maximum and 800 MB/s sustained transfer bandwidth. Its PCI-E gen2 × 4 interconnect can operate with a PCI-E gen2 × 2 link.
How much board power does the MV-GE2202 NIC consume?
Board power consumption is 2 W. Cooling is natural, the operating range is 0 to 60 °C, and storage is specified from -30 to 70 °C with humidity from 10% to 95% RH.
What camera-side rates and framing does MV-GE2202 support?
Each of the two RJ45 interfaces accepts 10/100/1000 Mbit/s GigE industrial-camera links. The board supports two simultaneous streams and a jumbo-frame size of 9.5 KB.
Which host operating systems are listed for MV-GE2202?
Host support includes Windows 7, 64-bit Windows 10 and Linux. The board presents its two-camera path through PCI-E gen2 and supplies 800 MB/s sustained transfer.
What does the P variant add to the MV-GE2202 layout?
MV-GE2202P keeps the WX1860 chip, two RJ45 ports, 9.5 KB jumbo frames, 2 W consumption and 800 MB/s sustained transfer, while adding PoE rated at 15.4 W on each channel.