Frame grabber · 2.5 GigE
Hikrobot MV-GE4002P
- Warranty
- 36 months
Two-port 2.5 GigE data and power
PoE is specified for MV-GE4002P. Its 2 RJ45 connections accept GigE or 2.5 GigE industrial cameras at 10, 100, 1000 or 2500 Mbit/s and carry two streams under IEEE 802.3. Host attachment is PCI-E gen2 × 4, with 2000 MB/s maximum transmission bandwidth and support for 9 KB jumbo frames.
The board suits paired inspection or process-monitoring cameras where power and image data share each Ethernet run. Card consumption is 4 W without PoE camera loads. It weighs approximately 202 g, measures 181 × 126.3 × 21.6 mm and works from 0 to 55 °C. The stated 10% RH to 95% RH range excludes environmental assumptions beyond those limits.
MV-GE4002 provides two ports, two streams and all four link rates; its power consumption is 4 W and its mass is approximately 182 g. MV-GE4004P expands the powered arrangement to four ports and streams, consuming 6.1 W without PoE loads and weighing about 210 g. Choose MV-GE4002P when exactly two multirate camera links need power from a gen2 × 4 adapter.
Specifications
| Camera ports | RJ45 × 2 |
| Cameras supported | 2 at most |
| Camera connection speed | 10/100/1000/2500 Mbps |
| Camera type supported | GigE industrial camera, 2.5 GigE industrial camera |
| Interconnect | PCI-E gen2 × 4 |
| Delivery bandwidth | 2000 MB/s (max. transmission bandwidth) |
| PoE support | PoE supported |
| Power consumption | 4 W without PoE |
| Operating temperature | 0 to 55 °C |
| Storage temperature | -20 to 70 °C |
| Humidity | 10 to 95 % RH |
| Dimensions | 181 × 126.3 × 21.6 mm |
| Weight | 202 g approx. |
| Certification | CE-EMC,KC |
| Standard | IEEE 802.3 |
| Stream | 2 |
| Jumbo frame | 9 KB |
| Supported OS | Windows 7/10/11, Ubuntu18.04 to 24.04 on 64-bit Linux |
Selection and applications
Powered two-camera inspection. Dual-stream 2.5 GigE capture. Single-cable camera integration.
Minimum kit: Seat MV-GE4002P in PCI-E gen2 × 4, connect up to two PoE GigE or 2.5 GigE cameras through RJ45, and supply host power for 4 W board consumption plus camera loads.
Nearby in the range: MV-GE4002 — Prefer it for two camera ports, two streams, 4 W consumption and approximately 182 g mass.; MV-GE4004P — Prefer it when four PoE camera links and four streams are needed..
Cameras that connect to this board
RJ45 × 2 · up to 2 cameras · 2000 MB/s:
Matched by interface and port count.
FAQ
What data rates and PoE capability do the two ports offer?
Both RJ45 ports support PoE and link speeds of 10, 100, 1000 or 2500 Mbit/s. The board accepts as many as two GigE or 2.5 GigE industrial cameras and carries two streams.
How does the board attach to the host acquisition computer?
Host attachment is PCI-E gen2 × 4, with maximum transmission bandwidth listed at 2000 MB/s. The camera-side network path supports 9 KB jumbo frames under IEEE 802.3.
Does the 4 W consumption figure include powered cameras?
The 4 W figure is explicitly stated without PoE. Host power planning must therefore start with the board consumption and separately include the loads of cameras powered through the two RJ45 links.
Which physical and environmental values govern installation?
The card is approximately 202 g and measures 181 × 126.3 × 21.6 mm. It works from 0 to 55 °C, stores from -20 to 70 °C and supports 10% RH to 95% RH without condensation.
What is different about the otherwise similar MV-GE4002?
MV-GE4002 retains two ports, two streams and the same link rates, consumes 4 W and weighs approximately 182 g. MV-GE4002P explicitly supports PoE through its two RJ45 ports and weighs approximately 202 g.