Frame grabber · 10 GigE
Hikrobot MV-GT2001
- Warranty
- 36 months
Compact single-port 10 GigE host interface
Single-camera 10 GigE acquisition with low board consumption is the role of MV-GT2001. One RJ45 port accepts a 10 GigE industrial camera at 1000 or 10000 Mbit/s. The PCI-E gen3 × 4 host interface is listed for 31.5 Gbit/s maximum transmission bandwidth, while sustained transmission bandwidth is 20 Gbit/s and 9.7 KB jumbo frames are supported.
The one-port arrangement fits a dedicated inspection camera, a standalone line-scan station or an upgrade path from 1000 to 10000 Mbit/s without allocating extra camera ports. Typical consumption is 7 W. At 160.9 × 104.9 × 21.6 mm and 121 g, the board is smaller and lighter than the four-port cards, and it operates from 0 to 60 °C.
MV-GT2002 adds a second RJ45 camera port while retaining PCI-E gen3 × 4, 20 Gbit/s sustained bandwidth and 9.7 KB jumbo frames; its consumption rises to 12 W and mass to 125 g. MV-GT1102P also has two RJ45 links, provides PoE and 2 GB DDR4 memory, and consumes 21.1 W. Choose MV-GT2001 when a single 1000/10000 Mbit/s camera link and 7 W typical card load are sufficient.
Specifications
| Camera ports | RJ45 × 1 |
| Cameras supported | 1 at most |
| Camera connection speed | 1000/10000 Mbps |
| Camera type supported | 10 GigE industrial camera |
| Interconnect | PCI-E gen3 × 4 |
| Delivery bandwidth | 31.5 Gbps (max. transmission bandwidth) |
| Sustained transmission bandwidth | 20 Gbps |
| Power consumption | 7 W typ. |
| Operating temperature | 0 to 60 °C |
| Storage temperature | -30 to 70 °C |
| Humidity | 10 to 95 % RH |
| Dimensions | 160.9 × 104.9 × 21.6 mm |
| Weight | 121 g |
| Certification | CE-EMC,KC |
| Jumbo frame | 9.7 KB |
| Supported OS | 64-bit Windows 7/10/11, Linux |
Selection and applications
Dedicated 10 GigE camera capture. Single-camera line-scan acquisition. Low-power inspection host integration.
Minimum kit: Install MV-GT2001 in PCI-E gen3 × 4, connect one 10 GigE industrial camera through its RJ45 port, and provide host power for 7 W typical consumption.
Nearby in the range: MV-GT2002 — Prefer it when two RJ45 camera ports are needed with the same 20 Gbit/s sustained bandwidth.; MV-GT1102P — Prefer it when two 10 Gbit/s RJ45 ports must also provide PoE..
Cameras that connect to this board
RJ45 × 1 · up to 1 cameras · 31.5 Gbps:
Matched by interface and port count.
FAQ
What link rates can the single RJ45 camera port negotiate?
The port accepts one 10 GigE industrial camera and lists camera connection speeds of 1000 or 10000 Mbit/s. A 9.7 KB jumbo-frame setting is also specified for the network data path.
Which PCIe slot and host bandwidth are associated with MV-GT2001?
The card uses PCI-E gen3 × 4. Maximum host transmission bandwidth is listed at 31.5 Gbit/s and sustained transmission bandwidth at 20 Gbit/s, defining the host path for its single camera stream.
What power, mass and dimensions distinguish the one-port card?
Typical consumption is 7 W, mass is 121 g and dimensions are 160.9 × 104.9 × 21.6 mm. These values make it the lower-power, lighter member of the GT2001 and GT2002 pair.
Which operating-system and temperature ranges are supported?
The operating information lists 64-bit Windows 7, Windows 10, Windows 11 and Linux. Working temperature is 0 to 60 °C, storage temperature is -30 to 70 °C, and humidity is 10% RH to 95% RH.
What changes when the two-port MV-GT2002 is selected?
MV-GT2002 adds a second RJ45 port and supports as many as two cameras. It keeps 20 Gbit/s sustained bandwidth and PCI-E gen3 × 4, while typical consumption increases from 7 W to 12 W and mass from 121 g to 125 g.