Frame grabber · 10 GigE
Hikrobot MV-GT1102P
- Warranty
- 36 months
Dual 10 GigE capture with camera power
Two PoE-capable RJ45 ports make MV-GT1102P a combined data-and-power interface for GigE Vision V2.0 cameras. Each electrical port supports 10 Gbit/s, with up to 20 Gbit/s across two cameras. The board has 2 GB DDR4 memory and a PCI-E gen3 × 4 host interconnect, concentrating dual-camera acquisition and camera power into one installed card.
The arrangement suits paired inspection cameras, two-sided component viewing and stations where reducing separate camera power wiring is important. Six configurable I/O connections accept single-ended or differential signals and support cascading of several grabbers. Bracket and PCB lines accept 3.3 V DC to 24 V DC inputs and provide 3.3 V DC outputs. Board consumption is 21.1 W, apart from attached camera loads.
MV-GT1002 also provides two 10 Gbit/s RJ45 ports, uses 2 GB DDR3 and PCI-E gen2 × 8, and consumes 19.2 W. MV-GT1104P expands the powered arrangement to four RJ45 ports, 4 GB DDR4 and PCI-E gen3 × 8, with 6750 MB/s sustained transfer. Choose MV-GT1102P when two powered camera links and a gen3 × 4 host slot match the inspection cell.
Specifications
| Camera ports | RJ45 × 2, supports POE |
| Cameras supported | 2 cameras max |
| Camera connection speed | 10 Gbps |
| Interconnect | PCI-E gen3 × 4 |
| On-board memory | 2 GB DDR4-RAM |
| Protocol | GigE Vision V2.0 |
| Trigger I/O | Configurable input/output × 6 , compatible with single -ended/differential, and supports cascading of multiple frame grabbers I/O on bracket: Line 0/1/2/3 supports 3.3 VDC to 24 VDC input, and 3.3 VDC output , N-terminal reference voltage is adjustable simultaneously I/O on PCB: Line 4/5 supports 3.3 VDC to 24 VDC input and 3.3 VDC output |
| Product type | 10 GigE Electrical Port Frame Grabber |
| PoE support | PoE supported |
| Power consumption | 21.1 W |
| Operating temperature | 0 to 55 °C |
| Humidity | 10% RH to 95% RH (no condensation) |
| Dimensions | 181 mm × 126.3 mm × 22.4 mm |
| Certification | CE-EMC,KC |
| Supported OS | Windows 7/10/11 |
| Client software | MVS |
| SDK | SDK for secondary development |
| Camera aggregate bandwidth | up to 20 Gbps across two 10GigE ports |
Selection and applications
Powered dual-camera inspection. Two-sided component acquisition. Cascaded GigE Vision triggering.
Minimum kit: Install MV-GT1102P in PCI-E gen3 × 4, connect up to two PoE GigE Vision cameras through RJ45, and provide host power for 21.1 W board consumption plus camera loads.
Nearby in the range: MV-GT1002 — Prefer it for two RJ45 links, 2 GB DDR3 memory and PCI-E gen2 × 8.; MV-GT1104P — Prefer it for four PoE RJ45 links, 4 GB DDR4 and 6750 MB/s sustained transfer..
Cameras that connect to this board
RJ45 × 2, supports POE · up to 2 cameras:
Matched by interface and port count.
FAQ
Can both RJ45 camera ports supply power as well as data?
Yes. MV-GT1102P provides 2 RJ45 ports with PoE support, and each carries a 10 Gbit/s camera link. Aggregate camera bandwidth is listed up to 20 Gbit/s across the two 10 GigE ports.
What PCIe connection and onboard memory does the card use?
The host interconnect is PCI-E gen3 × 4 and onboard buffering is 2 GB DDR4. These are the host-side requirements to pair with its two GigE Vision V2.0 electrical camera ports.
Which signal levels can the six configurable I/O lines accept?
Six configurable I/O connections support single-ended or differential signaling and grabber cascading. Bracket lines 0 through 3 and PCB lines 4 and 5 accept 3.3 V DC to 24 V DC inputs and provide 3.3 V DC outputs.
What board power and environmental range must the host handle?
The board itself consumes 21.1 W and works from 0 to 55 °C at 10% RH to 95% RH without condensation. Its dimensions are 181 × 126.3 × 22.4 mm; attached PoE camera loads must be considered separately.
How does MV-GT1102P differ from the earlier MV-GT1002?
Both accept two 10 Gbit/s cameras through RJ45. MV-GT1102P explicitly provides PoE, 2 GB DDR4 and PCI-E gen3 × 4, while MV-GT1002 uses 2 GB DDR3, PCI-E gen2 × 8 and 3350 MB/s sustained host transfer.