Frame grabber · CoaXPress
Hikrobot MV-GX1102
- Warranty
- 36 months
Compact host-link CXP-6 role
Two CXP-6 inputs on a PCI-E gen3 × 4 card define the MV-GX1102 acquisition path. The DIN 1.0/2.3 links accept 1.25, 2.5, 3.125, 5 and 6.25 Gbit/s, with 2 GB DDR4-RAM buffering image traffic. Host transfer is rated at 3400 MB/s maximum and 3350 MB/s sustained, and the supported data formats span Mono and Bayer 8/10/12/16 plus RGB 8.
This two-port arrangement fits a paired-view machine where both cameras feed a single gen3 host slot and external timing reaches the board through configurable I/O. Eleven lines operate as single-ended or differential inputs/outputs; lines 0 through 6 are on the bracket and lines 7 through 10 on the PCB, all spanning 3.3 V DC to 24 V DC. Each coaxial channel can deliver up to 13 W at 24 V DC with PoCXP.
MV-GX1102 matches MV-GX1002 at two cameras and 3350 MB/s sustained transfer, but changes DDR3 to DDR4, PCI-E gen2 × 8 to gen3 × 4, and lowers typical consumption without PoCXP from 13.7 W to 8.8 W. MV-GX1104 doubles the port count and memory to four and 4 GB while retaining the same host bandwidth. MV-GY1002 V2.0 is preferable when the camera side requires CXP-12 and HD-BNC instead of CXP-6 and DIN 1.0/2.3.
Specifications
| Camera ports | DIN 1.0/2.3 × 2 |
| Cameras supported | 2 max |
| Camera connection speed | 1.25/2.5/3.125/5/6.25 Gbps |
| Interconnect | PCI-E gen3 × 4 |
| Delivery bandwidth | 3400 MB/s (max. transmission bandwidth); 3350 MB/s (sustained transmission bandwidth) |
| On-board memory | 2 GB DDR4-RAM |
| CoaXPress generation | CXP-6 |
| Protocol | CXP-6 |
| Trigger I/O | Configurable input/output × 11, compatible with single-ended/differential. I/O on bracket: Line 0 to Line 6 supports input and output (3.3 VDC to 24 VDC). I/O on PCB: Line 7 to Line 10 supports input and output (3.3 VDC to 24 VDC) |
| Power output | 13 W @ 24 VDC max per channel |
| Pixel format | Mono 8/10/12/16; Bayer 8/10/12/16; RGB 8 |
| PoE support | PoCXP , each channel provides 13 W @ 24 VDC at most |
| Power consumption | 8.8 W typ. (without PoCXP) |
| Operating temperature | 0 to 55 °C |
| Storage temperature | -20 to 70 °C |
| Humidity | 10 to 95 % RH |
| Dimensions | 181 mm × 126.3 mm × 21.6 mm |
| Certification | CE-EMC |
| Camera connector type | DIN 1.0/2.3 |
| Supported OS | Windows 7/10/11, Ubuntu18.04 to 24.04 on 64-bit Linux |
| Client software | MVS |
| SDK | SDK for secondary development |
Selection and applications
Paired CXP-6 camera capture. DDR4-buffered image transfer. Differentially triggered acquisition.
Minimum kit: Install MV-GX1102 in a PCI-E gen3 × 4 host, attach as many as two CXP-6 cameras through DIN 1.0/2.3 coaxial cables, and keep PoCXP draw within 13 W at 24 V DC on each port.
Nearby in the range: MV-GX1104 — Prefer it when four CXP-6 camera ports and 4 GB DDR4 are required.; MV-GX1002 — Prefer it for two ports when the host provides PCI-E gen2 × 8.; MV-GY1002 V2.0 — Prefer it for CXP-12 cameras connected through HD-BNC..
Cameras that connect to this board
DIN 1.0/2.3 × 2 · up to 2 cameras · 3400 MB/s:
Matched by interface and port count.
FAQ
Which host slot and bandwidth does MV-GX1102 require?
The card uses a PCI-E gen3 × 4 interconnect. Its transfer figures are 3400 MB/s maximum and 3350 MB/s sustained, supported by 2 GB of on-board DDR4-RAM between the CXP inputs and host memory.
What CXP-6 rates are selectable on the MV-GX1102 ports?
Both DIN 1.0/2.3 camera connections support 1.25, 2.5, 3.125, 5 and 6.25 Gbit/s. Up to two cameras can be attached, with each port operating inside the listed CXP-6 rate set.
How is trigger I/O exposed by the MV-GX1102 board?
Eleven configurable lines support single-ended or differential input/output. Lines 0 through 6 are located on the bracket and lines 7 through 10 on the PCB; both groups cover a 3.3 V DC to 24 V DC operating range.
Can MV-GX1102 power cameras through the coaxial cable?
Yes. PoCXP can provide up to 13 W at 24 V DC on each of the two channels. Camera demand must remain inside that per-channel allowance. Typical frame-grabber consumption is 8.8 W when PoCXP load is excluded.
Which Linux releases are included for MV-GX1102 hosting?
The operating-system list covers Ubuntu 18.04 through 24.04 on 64-bit Linux, alongside Windows 7, 10 and 11. MVS client software and an SDK for secondary development complete the stated host software support.
What changes when moving from MV-GX1102 to MV-GX1104?
MV-GX1104 increases the camera interfaces from two to four and the DDR4 buffer from 2 GB to 4 GB. Both boards use PCI-E gen3 × 4, sustain 3350 MB/s and support the same CXP-6 link-rate set.