Hikrobot MV-ID5050XM

Maximum-rate 5 MP reading

High-rate global-shutter reading at 2432 × 2048 is the purpose of MV-ID5050XM. The monochrome 1/1.45-inch CMOS sensor has 3.45 µm pixels and reaches 92 fps, while decoding is rated for 120 codes/sec. Its 38 µs to 3 ms exposure range is focused on short captures, and Gigabit Ethernet at 1000 Mbit/s carries the resulting traffic.

This profile fits rapidly spaced codes and moving labels that require both detailed sampling and frequent acquisition. A touchscreen can trigger the device during setup, while three opto-isolated inputs handle machine events in service. Half-polarization is standard at the front, with transparent and full-polarization caps optional. Straight- and right-angle housings support two cable and sight-line arrangements.

MV-ID3050XM provides the same 2432 × 2048 pixel geometry but runs at 60 fps and 90 codes/sec over 100 Mbit/s Fast Ethernet. MV-ID5030M offers 2048 × 1536 at 60 fps and 90 codes/sec over Gigabit Ethernet. MV-ID5050XM is the rate-led selection: use it when 92 fps or 120 codes/sec is required and the 3 ms maximum exposure suits the illumination.

Available versions

Same device, different configuration. We match the part number to your working distance and field of view.

Specifications

Selection and applications

High-rate moving-label decoding. Short-exposure code capture. Touchscreen-assisted reader setup.

Minimum kit: Deploy MV-ID5050XM with its liquid-lens or mechanical optics, a Gigabit Ethernet cable, a 12-pin M12 power and I/O lead, and a 24 VDC supply.

Nearby in the range: MV-ID3050XM — Prefer it when 60 fps and 90 codes/sec are sufficient over Fast Ethernet.; MV-ID5030M — Prefer it for 2048 × 1536 capture at 60 fps over Gigabit Ethernet..

Cables and accessories for this model

Compatibility per manufacturer data.

Data cables

ID Ethernet, M12 8-pin

I/O & power cables

ID power, M12 12-pin

Power

Power

Lighting

SC lighting

Mounting

Reader mounts

Protection

Covers & filters

All accessory families →

FAQ

What throughput limits distinguish the MV-ID5050XM reader?

Image acquisition reaches 92 fps and maximum reading speed is 120 codes/sec. The reader maintains 2432 × 2048 global-shutter capture at those limits and connects through Gigabit Ethernet at 1000 Mbit/s.

How does the MV-ID5050XM exposure range suit moving marks?

Exposure is limited to 38 µs through 3 ms, paired with a global shutter. This favors short, well-lit captures of moving marks rather than long low-light integrations; gain is adjustable from 0 dB to 37 dB.

Can MV-ID5050XM be triggered without the line controller?

Yes. Pressing the touchscreen can trigger the reader during setup. In production, the 12-pin M12 connector supplies three opto-isolated inputs for machine events, three isolated outputs for results and an RS-232 input/output pair.

What power allowance should be made for MV-ID5050XM?

The unit operates from 24 VDC. With the light source enabled, average consumption is 11 W and maximum consumption is 36 W. Size the reader supply and 12-pin M12 wiring to the maximum stated load.

Which housing direction and temperature version can be selected?

Straight and right-angle forms are listed. The liquid-lens configuration works from 0 °C to 40 °C, while the mechanical configuration extends to 50 °C. Both use a 405 g body and IP67 protection with the waterproof cap installed correctly.