Hikrobot MV-VC531x

Compact seven-port controller applications

Seven GigE interfaces, including four PoE ports, give MV-VC531x a direct multi-camera acquisition role. Its Core i3-12100 platform runs unactivated Windows 10 and provides four USB 2.0, four USB 3.0 and one built-in USB 2.0 interface. Eight isolated inputs, twelve isolated outputs, eight isolated low-side driver outputs and four bidirectional differential I/O lines form a broad machine-control connection set.

The controller fits inspection cells that acquire several GigE cameras, power up to four through network connections and coordinate lighting or reject equipment from local I/O. Eight 24 VDC light interfaces are listed, with 72 W per channel and 190 W total. Two SATA 3.0 connections support storage expansion, while HDMI and VGA can drive independent displays at the same time up to 1920 × 1080 at 60 Hz.

MV-VC532x uses Core i3-12100 and the seven-port network layout in a 210 mm-high enclosure, with one ×16, one ×8 and two ×4 PCIe interfaces plus M.2 NVME. MV-VC551x uses a 105.2 mm-high enclosure and the seven-port network arrangement with Core i5-12400. MV-VC571x combines Core i7-12700 with the same 105.2 mm height and seven GigE ports, including four PoE.

Overview

A vision controller from the top VC5000 series on the Intel Core i3-12100 processor. Seven Gigabit ports, four of them with PoE, so a camera needs a single cable. RAM is chosen by part number: 8, 16 or 32 GB; the 2T suffix adds a 2 TB hard disk for the image archive.

A compact H610 chassis: two SATA bays, 105 mm high, 6 kg, 264 W typical. There are no expansion slots — this is a finished station, not a platform to build upon.

Available versions

One device, different revisions. We ship the current one by default; if a specific revision is already installed on your line, name it in the request and we will match it.

Specifications

Selection and applications

Seven-port GigE camera acquisition. Four-camera PoE inspection cells. Lighting and reject control from mixed I/O.

Minimum kit: Combine MV-VC531x with GigE cameras and lenses matched to their mounts, GigE cables for its seven ports, a 4-pin system-power cable, and a 24 VDC supply sized for 264 W typical consumption.

Nearby in the range: MV-VC532x — Prefer it when PCIe ×16, ×8 and ×4 card expansion is required.; MV-VC551x — Prefer it for a Core i5-12400 platform in the 105.2 mm-high enclosure.; MV-VC571x — Prefer it for Core i7-12700 processing with the same seven GigE port count..

Cables and accessories for this model

Compatibility per manufacturer data.

Other

VC accessories

All accessory families →

FAQ

How many cameras can receive power through the network ports?

The controller has seven GigE interfaces, four of which provide PoE. Thus four compatible GigE cameras can use those powered network connections, while the remaining three GigE interfaces provide network connectivity without being identified as PoE.

What machine I/O types are available beyond isolated inputs?

MV-VC531x provides eight opto-isolated inputs, twelve opto-isolated outputs with NPN/PNP switching, eight isolated low-side driver outputs and four non-isolated bidirectional differential I/O lines.

Which storage and peripheral connections are included?

Storage expansion uses two SATA 3.0 interfaces. Peripheral connectivity comprises four USB 2.0, four USB 3.0 and one built-in USB 2.0 interface, plus two RS-232 ports that can switch to RS-485 or RS-422.

What lighting capacity is integrated into MV-VC531x?

Eight 24 VDC light interfaces are listed. Each channel has a stated maximum of 72 W and the total is limited to 190 W, so the illumination allocation must remain within both the individual and combined ratings.

What enclosure, supply and ambient figures guide mounting?

The controller measures 302.3 × 248 × 105.2 mm and weighs approximately 6 kg. It takes 24 VDC through a 4-pin system-power interface, with 264 W typical consumption. The stated temperature entries extend from 0 °C to either 45 °C or 50 °C for Core i3-12100.