Board level area camera · CB Series
Hikrobot MV-CB016-10UM-B V4.0
- Warranty
- 36 months
Use cases and construction choices
A bare 32.5 mm × 32.5 mm × 1.6 mm format makes MV-CB016-10UM-B V4.0 the deeply embedded mono version of the IMX273 platform. Its 1/2.9-inch global-shutter CMOS sensor records 1440 × 1080 with 3.45 µm pixels. Full-frame operation reaches 165.4 fps in ADC 12 and 249.1 fps in ADC 8, while the board weighs about 10 g.
The camera can sit inside a feeder, instrument or motion assembly for rapid edge measurement and cycle analysis. Global shutter capture holds the outline of moving parts, with UltraShort exposure from 1 µs to 14 µs for synchronized lighting. Standard mode extends from 15 µs to 10 sec. USB 3.0 carries the mono stream and provides 5 VDC power at a typical 1.5 W; two bidirectional non-isolated I/O lines handle timing connections.
MV-CB016-10UM-C V4.0 adds a C-mount in a 35 mm × 35 mm × 8.6 mm, approximately 30 g body. MV-CB016-10UM-S V4.0 uses an S-mount at approximately 43.5 g. Both keep the mono IMX273 and speed modes. MV-CB016-10UC-B V4.0 retains the thin board but changes to color and a typical 1.9 W draw. Use 10UM-B for custom mechanics, C or S according to lens interface, and 10UC-B when color discrimination is necessary.
Specifications
| Product type | 1.6 MP USB 3.0 Board Level Camera |
| Sensor type | CMOS, global shutter |
| Sensor model | Sony® IMX273 |
| Sensor format | 1/2.9″ |
| Resolution | 1440 × 1080 |
| Pixel size | 3.45 μm × 3.45 μm |
| Maximum frame rate | 165.4 fps @1440 × 1080 Mono 8 (ADC 12) 249.1 fps @1440 × 1080 Mono 8 (ADC 8) |
| Mono color | Mono |
| Dynamic range | 71.5 dB |
| Exposure time | UltraShort exposure mode: 1 μs to 14 μs Standard exposure mode: 15 μs to 10 sec |
| Gain | 0 dB to 17 dB |
| Data interface | USB 3.0 |
| Digital I/O | Bi-directional non-isolated I/O × 2 (Line 2, Line 5) |
| Power supply | USB 3.0 power supply |
| Power consumption | Typ. 1.5 W @ 5 VDC |
| Operating temperature | 0 °C to 50 °C (32 °F to 122 °F) |
| Storage temperature | –30 °C to 70 °C (–22 °F to 158 °F) |
| Humidity | 20% RH to 80% RH (no condensation) |
| Dimensions | 32.5 mm × 32.5 mm × 1.6 mm (1.3″ × 1.3″ × 0.1″) |
| Weight | Approx. 10 g (0.02 lb.) |
| Certification | CE-EMC, KC |
| Compatibility | USB3 Vision, GenICam |
Selection and applications
Bare-board mono motion measurement. High-rate edge inspection. Internally mounted cycle analysis.
Minimum kit: Use the camera board with a lens and mechanical mount selected for the 1/2.9-inch sensor, plus a USB 3.0 cable to a host supplying 5 VDC power.
Nearby in the range: MV-CB016-10UM-C V4.0 — Choose it when the mono IMX273 platform needs a documented C-mount.; MV-CB016-10UM-S V4.0 — Choose it when the same mono speed modes are needed with an S-mount.; MV-CB016-10UC-B V4.0 — Choose it for color output on the same 32.5 mm × 32.5 mm × 1.6 mm board..
Cables and accessories for this model
Compatibility per manufacturer data.
- Data cables
- USB 3.0
- I/O & power cables
- CB board-level IO
FAQ
How thin is the MV-CB016-10UM-B V4.0 board assembly?
Its documented envelope is 32.5 mm × 32.5 mm × 1.6 mm, and approximate weight is 10 g. The equipment design must establish an optical holder and lens coverage around the 1/2.9-inch sensor and 1440 × 1080 image.
Which acquisition mode gives MV-CB016-10UM-B V4.0 its top rate?
ADC 8 allows up to 249.1 fps at 1440 × 1080 Mono 8. With ADC 12, the stated ceiling is 165.4 fps at the same resolution. Both modes use the IMX273 global-shutter sensor and USB 3.0 transfer.
What electrical connections does MV-CB016-10UM-B V4.0 require?
USB 3.0 provides image transport and the 5 VDC supply, with typical camera consumption of 1.5 W. Line 2 and Line 5 are the two bidirectional non-isolated I/O connections available for external timing or control.
How can exposure be set for fast motion on the mono B version?
UltraShort mode covers 1 µs to 14 µs and works with the global shutter for tightly timed motion capture. Standard mode begins at 15 µs and reaches 10 sec. Gain adjustment is specified from 0 dB to 17 dB.
What does MV-CB016-10UM-C V4.0 add to this board platform?
The C variant adds a C-mount and changes the package to 35 mm × 35 mm × 8.6 mm at approximately 30 g. It retains the mono 1440 × 1080 output, IMX273 sensor and the 165.4 fps ADC 12 and 249.1 fps ADC 8 limits.