Board level area camera · CB Series
Hikrobot MV-CB016-10UM-S V4.0
- Lead time
- from 5 days
- Warranty
- 36 months
Application fit within the series
Small-thread optics and fast mono frames define MV-CB016-10UM-S V4.0. Its S-mount sits ahead of a 1/2.9-inch Sony® IMX273 CMOS sensor with global shutter, 3.45 µm pixels and 1440 × 1080 output. USB 3.0 supports 165.4 fps in ADC 12 or 249.1 fps in ADC 8, while the assembled camera measures 35 mm × 35 mm × 8.6 mm.
The camera is suited to embedded edge inspection, high-rate position tracking and strobed analysis of repetitive mechanisms. A 1 µs to 14 µs UltraShort range helps limit motion during illuminated exposures, and Standard mode expands adjustment from 15 µs to 10 sec. The USB link supplies 5 VDC and transports images, with typical draw of 1.5 W. Two bidirectional non-isolated I/O points connect external sequence timing.
MV-CB016-10UM-C V4.0 keeps mono output and both frame-rate modes but uses a C-mount and weighs about 30 g rather than 43.5 g. MV-CB016-10UM-B V4.0 is the 1.6 mm, approximately 10 g board option. MV-CB016-10UC-S V4.0 preserves S-mount mechanics while adding color and raising typical draw to 1.9 W. Use the UM-S for mono processing with S-mount optics; choose the other variants for C-mount, thin-board mechanics or color.
Specifications
| Shutter | global |
| Nominal optical sensor format | 1/2.9″ |
| Sensor resolution | 1440×1080 px |
| Maximum frame rate | 165.4 fps @ ADC bit depth 12 bit, Mono8, resolution 1440×1080 px; 249.1 fps @ ADC bit depth 8 bit, Mono8, resolution 1440×1080 px |
| Color mode | mono |
| Lens mount | M12 |
| Data interface | USB 3.0 |
| Dimensions | 35×35×8.6 mm (without lens) |
| Sensor technology | CMOS |
| Sensor model | Sony® IMX273 |
| Pixel size | 3.45×3.45 µm |
| Dynamic range | 71.5 dB |
| Signal-to-noise ratio | 39.9 dB |
| Exposure time | 1…14 µs @ ultra-short exposure mode; 15…10000000 µs @ standard exposure mode |
| Auto exposure | Off, Once, Continuous |
| Gain | 0…17 dB |
| Pixel format | Mono8, Mono10, Mono10Packed, Mono12, Mono12Packed |
| Binning | 1x1, 2x2 |
| Decimation | 1x1, 2x2 |
| Protocol compatibility | USB3 Vision, GenICam |
| Third party software protocol | USB3 Vision |
| Client software | MVS |
| Operating systems | Windows 7 (32/64-bit), Windows 10 (32/64-bit), Windows 11 (64-bit), Linux (32/64-bit) |
| Digital I/O lines | 2 bidirectional lines, non-isolated, lines 2, 5 |
| Power delivery | USB |
| Power consumption | 1.5 W (typical) @ DC, supply voltage 5 V |
| Working temperature | 0…50 °C |
| Storage temperature | -30…70 °C |
| Humidity | 20…80 % @ non-condensing |
| Weight | 43.5 g (approx.) |
| Certification | CE, RoHS, KC |
| Port inventory | USB 3.0 (data) |
| Reverse image | horizontal, vertical |
Documents
Selection and applications
S-mount mono position tracking. Rapid embedded edge inspection. Short-exposure sequence analysis.
Minimum kit: Use the camera with an S-mount lens covering the 1/2.9-inch sensor and a USB 3.0 cable connected to a host that supplies 5 VDC power.
Nearby in the range: MV-CB016-10UM-C V4.0 — Choose it when the mono IMX273 platform must use C-mount optics; MV-CB016-10UM-B V4.0 — Choose it when a 32.5 mm × 32.5 mm × 1.6 mm mono board fits the mechanics; MV-CB016-10UC-S V4.0 — Choose it when the same S-mount form requires color output.
Cables and accessories for this model
Compatibility per manufacturer data.
- Data cables
- USB 3.0
- I/O & power cables
- CB board-level IO
FAQ
Which optical thread is supplied on MV-CB016-10UM-S V4.0?
The documented lens interface is S-mount for the 1/2.9-inch sensor. The finished assembly is 35 mm × 35 mm × 8.6 mm and weighs approximately 43.5 g. Lens selection should cover the sensor and satisfy the required scene geometry.
How quickly can MV-CB016-10UM-S V4.0 acquire Mono 8 frames?
The maximum at 1440 × 1080 Mono 8 is 165.4 fps in ADC 12 and 249.1 fps in ADC 8. Both figures apply at full stated resolution and use the global-shutter Sony® IMX273 sensor.
What supply and cabling arrangement serves MV-CB016-10UM-S V4.0?
USB 3.0 is the data interface and the 5 VDC power source. Typical consumption is 1.5 W, so the host-side USB connection forms the minimum data and supply path. Timing signals use Line 2 and Line 5 separately.
What operating temperature range applies to MV-CB016-10UM-S V4.0?
The specified working range is 0 °C to 50 °C, with 20% RH to 80% RH under non-condensing conditions. Storage extends from −30 °C to 70 °C. These limits should be used when defining the enclosure and thermal path.
How does the color S-mount model differ from MV-CB016-10UM-S V4.0?
MV-CB016-10UC-S V4.0 provides color rather than mono output. Resolution, IMX273 sensor, S-mount, dimensions and the 165.4/249.1 fps rate pair match; typical power is 1.9 W for color versus 1.5 W for mono.