Area camera · CB020 series
Hikrobot MV-CB020-60UC-C
- Warranty
- 36 months
High-cycle color applications
A 179.9 fps color stream at 1624 × 1240 gives MV-CB020-60UC-C a clear high-cycle inspection role. The 1/2.53-inch Stacked BSI CMOS sensor uses a global shutter, while USB 3.0 handles image transfer and operating power. The mechanical selection spans no mount, C-mount and M12-mount forms, with approximate masses of 10 g and 30 g listed for the configurations.
Rapid color sorting, print or marker presence, and moving-assembly checks follow from the combination of color, global exposure and frame rate. The camera can observe closely spaced process events while preserving feature geometry within each image. Two bidirectional non-isolated I/O lines support hardware timing, the interface is compatible with USB 2.0, and typical power consumption is 1.6 W from USB 3.0.
MV-CB020-60UM-C keeps the same Stacked BSI sensor, 1624 × 1240 resolution and 179.9 fps but changes the output to monochrome and draws 1.5 W. MV-CB016-10UC-C V4.0 offers color at 1440 × 1080 and 165.4 fps on the smaller 1/2.9-inch Sony IMX273. MV-CB020-60UC-C is the selection when both the larger 1624 × 1240 color frame and the 179.9 fps rate contribute to the inspection decision.
Specifications
| Sensor type | CMOS |
| Sensor model | Stacked BSI |
| Sensor format | 1/2.53″ |
| Resolution | 1624 × 1240 px |
| Maximum frame rate | 179.9 fps |
| Shutter | global shutter |
| Mono color | Color |
| Data interface | USB 3.0 |
| Digital I/O | Bi-directional non-isolated I/O × 2 (Line 2, Line 5) |
| Lens mount | None / C-mount / M12-mount |
| Power supply | USB 3.0 power supply |
| Power consumption | 1.6 W |
| Operating temperature | 0 to 50 °C |
| Storage temperature | -30 to 80 °C |
| Humidity | 20% RH to 80% RH, no condensation |
| Weight | Approx. 10 g / Approx. 30 g |
| Usb 2.0 compatibility | True |
Selection and applications
High-cycle color sorting at 179.9 fps. Moving marker and print inspection. Global-shutter assembly checks at 1624 × 1240.
Minimum kit: MV-CB020-60UC-C, a C-mount or M12-mount lens for the chosen form, and a USB 3.0 cable supplying image transfer and power make up the basic kit.
Nearby in the range: MV-CB020-60UM-C — Prefer it when 1624 × 1240 at 179.9 fps can be monochrome.; MV-CB016-10UC-C V4.0 — Prefer it for a 1/2.9-inch color sensor at 165.4 fps..
Cables and accessories for this model
Compatibility per manufacturer data.
- Data cables
- USB 3.0
- Power
- Power
- Mounting
- Camera mounts
FAQ
Which lens-mount forms are listed for MV-CB020-60UC-C?
The camera can be configured without a mount, with C-mount or with M12-mount around its 1/2.53-inch sensor. A lens-equipped variant needs optics that cover the full 1624 × 1240 active image.
Does MV-CB020-60UC-C receive its operating power through USB?
Yes. USB 3.0 is the data interface and power source, and the color model consumes 1.6 W. The link is also stated to be compatible with USB 2.0, while the maximum camera rate is 179.9 fps.
How does the global shutter support the 179.9 fps rate?
Global exposure captures all rows over the same interval, so each 1624 × 1240 frame represents one consistent stage of a moving process. The 179.9 fps maximum then provides frequent color observations.
What electrical timing channels are available on this camera?
MV-CB020-60UC-C provides two bidirectional non-isolated I/O channels on Line 2 and Line 5. They can connect capture timing to a machine sensor, controller or illumination circuit.
What differs between the UC and UM versions of CB020-60?
MV-CB020-60UC-C outputs color and consumes 1.6 W; MV-CB020-60UM-C outputs mono and consumes 1.5 W. Both list 1624 × 1240, 179.9 fps, global shutter and USB 3.0 power.