Area camera · CB020 series
Hikrobot MV-CB020-60UM-C
- Warranty
- 36 months
Fast mono tasks and model selection
Monochrome analysis at 179.9 fps and 1624 × 1240 is the working profile of MV-CB020-60UM-C. Its 1/2.53-inch Stacked BSI CMOS sensor combines global shutter with a USB 3.0 data and power connection. No-mount, C-mount and M12-mount configurations allow different optical packaging, and the listed mass is approximately 10 g or 30 g depending on the form.
The model suits high-rate counting, edge location, position measurement and feed monitoring where intensity and geometry contain the required result. Global exposure keeps a moving part coherent within every frame, while the high image frequency samples rapid process changes. Two bidirectional non-isolated channels on Line 2 and Line 5 support hardware timing. USB 2.0 compatibility is stated, and USB 3.0 power consumption is 1.5 W.
MV-CB020-60UC-C is the color version with the same 1624 × 1240 image, 179.9 fps, sensor format and mounting choices, at a listed 1.6 W. MV-CB016-10GM-S provides monochrome 1440 × 1080 at 65.2 fps but changes to Gigabit Ethernet, PoE and the Sony IMX296. Select MV-CB020-60UM-C when monochrome processing needs the higher USB rate and global-shutter capture rather than the network interface.
Specifications
| Sensor type | CMOS |
| Sensor model | Stacked BSI |
| Sensor format | 1/2.53″ |
| Resolution | 1624 × 1240 px |
| Maximum frame rate | 179.9 fps |
| Shutter | global shutter |
| Mono color | Mono |
| Data interface | USB 3.0 |
| Digital I/O | Bi-directional non-isolated I/O × 2 (Line 2, Line 5) |
| Lens mount | None / C-mount / M12-mount |
| Power supply | USB 3.0 power supply |
| Power consumption | 1.5 W |
| Operating temperature | 0 to 50 °C |
| Storage temperature | -30 to 80 °C |
| Humidity | 20% RH to 80% RH, no condensation |
| Weight | Approx. 10 g / Approx. 30 g |
| Usb 2.0 compatibility | True |
Selection and applications
High-rate monochrome part counting. Edge and position measurement at 179.9 fps. USB-powered feed monitoring at 1624 × 1240.
Minimum kit: MV-CB020-60UM-C, a C-mount or M12-mount lens for the selected form, and a USB 3.0 cable carrying data and power constitute the minimum acquisition kit.
Nearby in the range: MV-CB020-60UC-C — Prefer it when the high-rate inspection needs color information.; MV-CB016-10GM-S — Prefer it for monochrome 1440 × 1080 capture over Gigabit Ethernet..
Cables and accessories for this model
Compatibility per manufacturer data.
- Data cables
- USB 3.0
- Power
- Power
- Mounting
- Camera mounts
FAQ
How can C-mount or M12-mount optics attach to MV-CB020-60UM-C?
The available forms are no mount, C-mount and M12-mount. In a lens-equipped version, the optics should match the chosen mechanical interface and cover the 1/2.53-inch sensor over 1624 × 1240 pixels.
What is required to power the monochrome CB020 camera?
The camera is powered through USB 3.0, which also transports the image stream. Its listed consumption is 1.5 W. USB 2.0 compatibility is included, but the documented maximum rate remains 179.9 fps.
Which applications use 179.9 fps without color output?
Fast count, position, edge and feed-state algorithms can use the 179.9 fps sequence at 1624 × 1240. Because the output is monochrome, processing can focus on intensity and geometry rather than chromatic differences.
How are capture events connected to external equipment?
Two bidirectional non-isolated I/O lines are provided, identified as Line 2 and Line 5. They allow the camera event to be linked with a controller, machine sensor or timed illumination in the embedded device.
When should the matching color MV-CB020-60UC-C be used?
Use MV-CB020-60UC-C when color is itself an inspection feature. It retains 1624 × 1240, 179.9 fps, global shutter and USB 3.0 power, while consumption changes from 1.5 W to 1.6 W.