Board level area camera · CB Series
Hikrobot MV-CB020-61UM-S-F
- Warranty
- 36 months
Sensor modes, tasks and neighbours
S-mount optics pair with a 1/1.7-inch, 4.5 µm-pixel mono sensor in MV-CB020-61UM-S-F. The Stacked BSI CMOS device uses global shutter capture and supplies 1624 × 1240 Mono 8 at up to 99 fps. Dynamic range is specified at 73.9 dB, and the 29 mm × 29 mm × 31.3 mm camera weighs approximately 37 g.
For inspection and measurement, the camera can switch between High full well capacity and High sensitivity ranges. The former uses 30 µs to 10 sec exposure with gain to 12.8 dB; the latter starts at 5 µs and extends gain to 24 dB. This supports moving-part edge capture and static alignment work under differing illumination. USB 3.0 supplies 5 V and transports data at a typical 1.5 W, with USB 2.0 support and two bidirectional I/O lines.
MV-CB020-61UM-C-F substitutes C-mount while leaving the sensor, dual modes, dimensions and 99 fps ceiling unchanged. MV-CB020-61UM-B-F shortens the package to 27.6 mm and retains the same imaging core. MV-CB020-60UM-S stays with S-mount and 1624 × 1240 Mono 8, but uses 3.45 µm pixels on a 1/2.53-inch sensor and runs at 179.9 fps. Choose 61UM-S-F for S-mount plus its larger-pixel mode choice; move to 60UM-S when frame rate dominates.
Specifications
| Product type | 2 MP USB 3.0 Board Level Camera |
| Sensor type | CMOS, global shutter |
| Sensor model | Stacked BSI |
| Sensor format | 1/1.7″ |
| Resolution | 1624 × 1240 |
| Pixel size | 4.5 µm × 4.5 µm |
| Maximum frame rate | 99 fps @ 1624 × 1240 Mono 8 |
| Mono color | Mono |
| Dynamic range | 73.9 dB |
| Exposure time | High full well capacity: 30 μs to 10 sec High sensitivity: 5 μs to 10 sec |
| Gain | High full well capacity: 0 dB to 12.8 dB High sensitivity: 0 dB to 24 dB |
| Data interface | USB 3.0, compatible with USB 2.0 |
| Digital I/O | Bi-directional non-isolated I/O × 2 (Line 2, Line 5) |
| Lens mount | S-mount |
| Power supply | 5 V, USB 3.0 power supply |
| Power consumption | Typ. 1.5 W @ 5 VDC (USB power supply) |
| Operating temperature | 0 °C to 50 °C (32 °F to 122 °F) |
| Storage temperature | –30 °C to 80 °C (–22 °F to 176 °F) |
| Humidity | 20% RH to 80% RH (no condensation) |
| Dimensions | 29 mm × 29 mm × 31.3 mm (1.1″ × 1.1″ × 1.2″) |
| Weight | Approx. 37 g (0.08 lb.) |
| Certification | CE-EMC, KC |
| Compatibility | USB3 Vision, GenICams |
Selection and applications
S-mount dual-mode inspection. High-sensitivity mono capture. Global-shutter alignment measurement.
Minimum kit: Use the camera with an S-mount lens covering the 1/1.7-inch sensor, a USB 3.0 cable, and 5 V power supplied by the USB host.
Nearby in the range: MV-CB020-61UM-C-F — Choose it when the same 4.5 µm dual-mode sensor must take C-mount optics.; MV-CB020-61UM-B-F — Choose it when a 27.6 mm-deep B package suits the same 99 fps imaging core.; MV-CB020-60UM-S — Choose it for S-mount Mono 8 capture at 179.9 fps with 3.45 µm pixels..
Cables and accessories for this model
Compatibility per manufacturer data.
- Data cables
- USB 3.0
- I/O & power cables
- CB board-level IO
FAQ
What lens mounting standard does MV-CB020-61UM-S-F provide?
The camera uses S-mount for its 1/1.7-inch sensor. A suitable S-mount lens must cover that optical format and match the inspection field. The assembly measures 29 mm × 29 mm × 31.3 mm and weighs approximately 37 g.
How do the gain ranges differ on MV-CB020-61UM-S-F?
High full well capacity mode permits gain from 0 dB to 12.8 dB, with 30 µs to 10 sec exposure. High sensitivity mode expands gain to 24 dB and exposure down to 5 µs, while retaining the same mono resolution.
Can MV-CB020-61UM-S-F capture moving targets without row skew?
The sensor is specified with a global shutter, so its 1624 × 1240 rows share the capture interval. Maximum output is 99 fps in Mono 8, and the shortest stated exposure is 5 µs in High sensitivity mode.
What host connection is required by MV-CB020-61UM-S-F?
USB 3.0 is used for image transfer and the 5 V supply, with typical consumption of 1.5 W. It is compatible with USB 2.0. Two bidirectional non-isolated I/O lines are available for trigger and timing integration.
Why select MV-CB020-60UM-S for a faster S-mount station?
MV-CB020-60UM-S increases the full-resolution mono rate from 99 fps to 179.9 fps and retains S-mount. It uses a smaller 1/2.53-inch sensor with 3.45 µm pixels rather than the 1/1.7-inch, 4.5 µm-pixel sensor in 61UM-S-F.