Board level area camera · CB Series
Hikrobot MV-CB020-60UM-S
- Lead time
- from 5 days
- Warranty
- 36 months
Selection notes for this variant
An S-mount, global shutter and 179.9 fps Mono 8 output define MV-CB020-60UM-S. The 1/2.53-inch Stacked BSI CMOS sensor records 1624 × 1240 from 3.45 µm pixels. Its optical mount is packaged in a 35 mm × 35 mm × 8.6 mm body weighing approximately 30 g, with USB 3.0 used for the image connection.
Suitable duties include high-rate edge checks, position verification on moving parts and capture of repeating mechanical events. Global shutter exposure aligns the entire frame in time, and exposure can run from 23 µs to 10 sec. The USB 3.0 port provides 5 VDC power at a typical 1.5 W and is compatible with USB 2.0. Line 2 and Line 5 are bidirectional non-isolated I/O points for trigger or sequence timing.
MV-CB020-60UM-B removes the S-mount body and places the same mono imaging on a 1.6 mm board weighing about 10 g. MV-CB020-60UC-S preserves S-mount mechanics and 179.9 fps but outputs Bayer GB 8 color with a typical 1.6 W draw. MV-CB020-61UM-S-F is a mono S-mount alternative with a larger 1/1.7-inch sensor, 4.5 µm pixels, 73.9 dB dynamic range and 99 fps rate. Use 60UM-S when S-mount mono speed leads the choice.
Specifications
| Shutter | global |
| Nominal optical sensor format | 1/2.53″ |
| Sensor resolution | 1624×1240 px |
| Maximum frame rate | 179.9 fps @ Mono8, resolution 1624×1240 px |
| Color mode | mono |
| Lens mount | M12×0.5 |
| Data interface | USB 3.0 |
| Dimensions | 35×35×8.6 mm (without lens) |
| Sensor technology | CMOS, stacked BSI |
| Pixel size | 3.45×3.45 µm |
| Dynamic range | 68.6 dB |
| Signal-to-noise ratio | 44.1 dB |
| Exposure time | 23…10000000 µs |
| Auto exposure | Off, Once, Continuous |
| Gain | 0…24 dB |
| Pixel format | Mono8, Mono10, Mono10Packed, Mono12, Mono12Packed |
| Binning | 1x1, 2x2, 4x4 |
| Decimation | 1x1, 2x2, 4x4 |
| USB 2.0 compatibility | yes |
| Protocol compatibility | USB3 Vision, GenICam |
| Third party software protocol | USB3 Vision |
| Client software | MVS |
| Operating systems | Windows 7 (32/64-bit), Windows 10 (32/64-bit), Windows 11 (64-bit), Linux (32/64-bit) |
| Digital I/O lines | 2 bidirectional lines, non-isolated, lines 2, 5 |
| Power delivery | USB |
| Power consumption | 1.5 W (typical) @ DC, supply voltage 5 V |
| Working temperature | 0…50 °C |
| Storage temperature | -30…80 °C |
| Humidity | 20…80 % @ non-condensing |
| Weight | 30 g (approx.) |
| Certification | CE, RoHS, KC |
| Port inventory | USB 3.0 (data) |
| Reverse image | horizontal, vertical |
Documents
Selection and applications
S-mount mono edge checks. Moving-part position verification. High-rate mechanism capture.
Minimum kit: Use the camera with an S-mount lens covering the 1/2.53-inch sensor and a USB 3.0 cable connected to a host that supplies 5 VDC power.
Nearby in the range: MV-CB020-60UM-B — Choose it when the same 179.9 fps mono platform must fit a 1.6 mm board; MV-CB020-60UC-S — Choose it when S-mount acquisition requires Bayer GB 8 color; MV-CB020-61UM-S-F — Choose it for 4.5 µm mono pixels and selectable high-full-well or high-sensitivity operation.
Cables and accessories for this model
Compatibility per manufacturer data.
- Data cables
- USB 3.0
- I/O & power cables
- CB board-level IO
FAQ
What S-mount lens type mates with MV-CB020-60UM-S?
The camera provides an S-mount for the 1/2.53-inch sensor. The selected S-mount lens must cover that format and match the scene geometry. The complete package measures 35 mm × 35 mm × 8.6 mm and weighs approximately 30 g.
What is the maximum Mono 8 rate of MV-CB020-60UM-S?
Full stated resolution is 1624 × 1240 Mono 8 at up to 179.9 fps. The Stacked BSI CMOS sensor uses 3.45 µm pixels and a global shutter, allowing the rate to be applied to moving-part measurements.
How does MV-CB020-60UM-S connect to its host and supply?
USB 3.0 carries images and supplies the specified 5 VDC power, with typical consumption of 1.5 W. USB 2.0 operation is also supported. External timing can use the two bidirectional non-isolated I/O points.
What thermal limits should enclose MV-CB020-60UM-S operation?
Working temperature is 0 °C to 50 °C and humidity is 20% RH to 80% RH without condensation. The storage range is −30 °C to 80 °C. Equipment thermal and moisture control should keep the camera within these limits.
What does MV-CB020-61UM-S-F trade against this model?
MV-CB020-61UM-S-F keeps mono 1624 × 1240 and an S-mount, but changes to a 1/1.7-inch sensor with 4.5 µm pixels and 73.9 dB dynamic range. Its maximum is 99 fps, compared with 179.9 fps for 60UM-S.