Board level area camera · CB Series
Hikrobot MV-CB060-10UC-B V4.0
- Lead time
- from 5 days
- Warranty
- 36 months
Detail capture in the bare-board form
A 3072 × 2048 color image from a 1.6 mm board defines MV-CB060-10UC-B V4.0. The 6.3 MP Sony® IMX178 CMOS sensor has a 1/1.8-inch format, 2.4 µm pixels and a rolling shutter. It delivers Bayer RG 8 at up to 60.9 fps over USB 3.0, while the 32.5 mm × 32.5 mm assembly weighs approximately 10 g.
The pixel count suits inspection of fine static features, color regions and component presence where object motion is stopped or controlled for rolling-shutter acquisition. Exposure adjusts from 8 µs to 1 sec and gain from 0 dB to 24 dB. USB 3.0 supplies 5 VDC along with the data link at a typical 1.8 W. Two bidirectional non-isolated I/O lines can coordinate the frame timing with the machine cycle.
MV-CB060-10UC-C V4.0 keeps the color sensor and 60.9 fps rate but adds a C-mount in a 35 mm × 35 mm × 8.6 mm body. MV-CB060-10UC-S V4.0 instead has an M12-mount at the same dimensions and an approximate 43.5 g weight. MV-CB060-10UM-B V4.0 retains the 1.6 mm board and changes to Mono 8 with a typical 1.5 W draw. Select 10UC-B for thin-board color integration, then move to C or S for a defined mount or UM-B for mono measurement.
Specifications
| Shutter | rolling |
| Nominal optical sensor format | 1/1.8″ |
| Sensor resolution | 3072×2048 px |
| Maximum frame rate | 60.9 fps @ BayerRG8, resolution 3072×2048 px |
| Color mode | color |
| Lens mount | not available |
| Data interface | USB 3.0 |
| Dimensions | 32.5×32.5×1.6 mm |
| Sensor technology | CMOS |
| Sensor model | Sony® IMX178 |
| Pixel size | 2.4×2.4 µm |
| Dynamic range | 66 dB |
| Signal-to-noise ratio | 41.5 dB |
| Exposure time | 8…1000000 µs |
| Auto exposure | Off, Once, Continuous, global reset; triggered rolling shutter |
| Gain | 0…24 dB |
| Pixel format | Mono8, Mono10, Mono12, BayerRG8, BayerRG10, BayerRG10Packed, BayerRG12, BayerRG12Packed, YUV422Packed, YUV422_YUYV_Packed, RGB8, BGR8 |
| Binning | 1x1, 2x2 |
| Decimation | 1x1, 2x2, 4x4 |
| Protocol compatibility | USB3 Vision, GenICam |
| Third party software protocol | USB3 Vision |
| Client software | MVS |
| Operating systems | Windows XP (32/64-bit), Windows 7 (32/64-bit), Windows 10 (32/64-bit), Linux (32/64-bit), macOS (64-bit) |
| Digital I/O lines | 2 bidirectional lines, non-isolated, lines 2, 5 |
| Power delivery | USB |
| Power consumption | 1.8 W (typical) @ DC, supply voltage 5 V |
| Working temperature | 0…50 °C |
| Storage temperature | -30…70 °C |
| Humidity | 20…80 % @ non-condensing |
| Weight | 10 g (approx.) |
| Certification | CE, RoHS, KC |
| Port inventory | USB 3.0 (data) |
| Reverse image | horizontal, vertical |
Documents
Selection and applications
Embedded color feature inspection. Controlled-motion detail capture. High-resolution component checks.
Minimum kit: Use the camera board with a lens and mechanical mount selected for the 1/1.8-inch sensor, plus a USB 3.0 cable to a host supplying 5 VDC power.
Nearby in the range: MV-CB060-10UC-C V4.0 — Choose it when the 3072 × 2048 color platform needs an integrated C-mount; MV-CB060-10UC-S V4.0 — Choose it when the same color imaging must use an M12-mount; MV-CB060-10UM-B V4.0 — Choose it for 3072 × 2048 Mono 8 output on the same 1.6 mm board.
Cables and accessories for this model
Compatibility per manufacturer data.
- Data cables
- USB 3.0
- I/O & power cables
- CB board-level IO
FAQ
What detail and speed does MV-CB060-10UC-B V4.0 provide?
The camera outputs 3072 × 2048 Bayer RG 8 at up to 60.9 fps. Its Sony® IMX178 color sensor uses 2.4 µm pixels on a 1/1.8-inch format, providing the stated 6.3 MP spatial sampling over USB 3.0.
How should motion be handled with MV-CB060-10UC-B V4.0?
The IMX178 uses a rolling shutter, so stationary subjects or machine timing that controls motion during exposure are the direct use cases. Exposure can be reduced to 8 µs, and two bidirectional I/O lines can participate in synchronization.
What mechanical envelope surrounds MV-CB060-10UC-B V4.0?
The board measures 32.5 mm × 32.5 mm × 1.6 mm and weighs approximately 10 g. Its optical integration must cover the 1/1.8-inch sensor while respecting the shallow board profile inside the host equipment.
Which connection powers MV-CB060-10UC-B V4.0 during operation?
USB 3.0 is both the image interface and the specified 5 VDC supply. Typical consumption is 1.8 W. The camera also provides two bidirectional non-isolated I/O points identified as Line 2 and Line 5.
When should MV-CB060-10UC-C V4.0 be chosen over the B variant?
Choose the C version when the design needs an integrated C-mount. It uses a 35 mm × 35 mm × 8.6 mm, approximately 30 g body, while the B version is a 32.5 mm × 32.5 mm × 1.6 mm, approximately 10 g board. Imaging performance matches.