Board level area camera · CB Series
Hikrobot MV-CB060-10UM-B V4.0
- Warranty
- 36 months
Thin-board mono imaging role
A mount-free 1.6 mm board carries the 6.3 MP mono imaging core in MV-CB060-10UM-B V4.0. The 1/1.8-inch Sony® IMX178 CMOS sensor combines 3072 × 2048 Mono 8 output, 2.4 µm pixels and a rolling shutter at up to 60.9 fps. Board dimensions are 32.5 mm × 32.5 mm, weight is approximately 10 g, and USB 3.0 provides the host interface.
High spatial sampling supports edge location, fine surface-feature checks and component-presence analysis where the subject is stationary or its motion is controlled during rolling-shutter exposure. The 8 µs to 1 sec exposure span covers short synchronized frames and setup capture. USB 3.0 supplies 5 VDC at a typical 1.5 W. Two bidirectional non-isolated I/O lines connect the camera timing to sensors or the machine sequence.
MV-CB060-10UM-C V4.0 adds a C-mount in a 35 mm × 35 mm × 8.6 mm body weighing about 30 g. MV-CB060-10UM-S V4.0 uses an M12-mount and weighs about 43.5 g; both preserve Mono 8 and 60.9 fps. MV-CB060-10UC-B V4.0 retains the 1.6 mm board but changes to Bayer RG 8 color and raises typical draw to 1.8 W. Choose UM-B when the host provides the optical mechanics and mono detail is required in the shallowest listed package.
Specifications
| Product type | 6.3 MP USB 3.0 Board Level Camera |
| Sensor type | CMOS, rolling shutter |
| Sensor model | Sony® IMX178 |
| Sensor format | 1/1.8″ |
| Resolution | 3072 × 2048 |
| Pixel size | 2.4 μm × 2.4 μm |
| Maximum frame rate | 60.9 fps @3072 × 2048 Mono 8 |
| Mono color | Mono |
| Dynamic range | 66 dB |
| Exposure time | 8 μs to 1 sec |
| Gain | 0 dB to 24 dB |
| Data interface | USB3.0 |
| Digital I/O | Bi-directional non-isolated I/O × 2 (Line 2, Line 5) |
| Lens mount | Without lens mount (single board) |
| Power supply | USB3.0 power supply |
| Power consumption | Typ. 1.5 W @ 5 VDC |
| Operating temperature | 0 °C to 50 °C (32 °F to 122 °F) |
| Storage temperature | -30 °C to 70 °C (-22 °F to 158 °F) |
| Humidity | 20% to 80% RH, non-condensing |
| Dimensions | 32.5 mm × 32.5 mm × 1.6 mm (1.3″ × 1.3″ × 0.1″) |
| Weight | Approx. 10 g (0.02 lb.) |
| Certification | CE-EMC, KC |
| Compatibility | USB3 Vision, GenICam |
Selection and applications
Mount-free mono detail capture. Embedded edge location. Synchronized static-feature inspection.
Minimum kit: Use the mount-free camera board with a lens and device-side holder covering the 1/1.8-inch sensor, plus a USB 3.0 cable to a host supplying 5 VDC power.
Nearby in the range: MV-CB060-10UM-C V4.0 — Choose it when the 3072 × 2048 mono platform requires an integrated C-mount.; MV-CB060-10UM-S V4.0 — Choose it when an M12-mount is required with the same mono image and rate.; MV-CB060-10UC-B V4.0 — Choose it for Bayer RG 8 color on the same 32.5 mm × 32.5 mm × 1.6 mm board..
Cables and accessories for this model
Compatibility per manufacturer data.
- Data cables
- USB 3.0
- I/O & power cables
- CB board-level IO
FAQ
What optical hardware surrounds MV-CB060-10UM-B V4.0?
This single-board version is specified without a lens mount. The device must provide a lens holder and an optic covering the 1/1.8-inch sensor. The camera board itself is 32.5 mm × 32.5 mm × 1.6 mm.
What mono resolution and rate come from MV-CB060-10UM-B V4.0?
The camera delivers 3072 × 2048 Mono 8 at up to 60.9 fps. The Sony® IMX178 sensor uses 2.4 µm pixels, a 1/1.8-inch optical format, a rolling shutter and a specified dynamic range of 66 dB.
How can rolling-shutter effects be managed on the UM-B version?
Use stationary targets or coordinate subject motion with acquisition through the camera's timing interface. Exposure can be set from 8 µs to 1 sec, and Line 2 plus Line 5 provide two bidirectional non-isolated I/O points.
What power does MV-CB060-10UM-B V4.0 draw from USB?
The USB 3.0 link provides the specified 5 VDC supply and transports images. Typical consumption is 1.5 W. This is lower than the 1.8 W typical figure for the color MV-CB060-10UC-B V4.0.
Which sibling adds C-mount to MV-CB060-10UM-B V4.0 imaging?
MV-CB060-10UM-C V4.0 adds C-mount while retaining the mono IMX178, 3072 × 2048 output and 60.9 fps limit. Its package is 35 mm × 35 mm × 8.6 mm and approximately 30 g rather than a 1.6 mm, 10 g board.