Area camera · CH Series
Hikrobot MV-CH050-10CC
- Lead time
- from 5 days
- Warranty
- 36 months
Color inspection and neighboring models
Color inspection at 2432 × 2048 and 140 fps is the operating point of MV-CH050-10CC. The camera combines a Sony IMX250 CMOS sensor, 2/3-inch format, 3.45 µm pixels and a global shutter with a Camera Link SDR interface. It suits machines that need color separation and rapid full-frame capture through an established Camera Link image path.
The global shutter supports geometry checks on moving labels, printed material and assembled parts while retaining color information. Exposure can be set from 15 µs to 10 sec, and gain spans 0 dB to 17 dB. Hardware coordination is available through the 6-pin P7 connector, with isolated input and output lines plus one bidirectional non-isolated line.
MV-CH050-10UC V4.0 uses the same IMX250 family and 2448 × 2048 color format but reaches 74.1 fps over USB 3.0. MV-CH050-90TC-C-NF keeps a similar 2448 × 2048 color frame and rises to 163.4 fps through 10 Gigabit Ethernet. MV-CH050-10CC fits between them when 140 fps and Camera Link are required together.
Specifications
| Shutter | global |
| Sensor model | Sony® IMX250 |
| Nominal optical sensor format | 2/3″ |
| Sensor resolution | 2432×2048 px |
| Maximum frame rate | 140 fps @ resolution 2432×2048 px |
| Color mode | color |
| Lens mount | C-mount |
| Data interface | Camera Link |
| Sensor technology | CMOS |
| Pixel size | 3.45×3.45 µm |
| Dynamic range | 75.4 dB |
| Signal-to-noise ratio | 40 dB |
| Exposure time | 15…10000000 µs |
| Auto exposure | Off, Once, Continuous |
| Gain | 0…17 dB |
| Pixel format | BayerRG8, BayerRG10, BayerRG12, RGB8 |
| Binning | not available |
| Decimation | not available |
| Data interface connector | Camera Link SDR ×2 |
| Protocol compatibility | Camera Link, GenICam |
| Communication protocol versions | Camera Link 2.0 |
| Third party software protocol | GenICam |
| Client software | MVS |
| Operating systems | Windows XP (32/64-bit), Windows 7 (32/64-bit), Windows 10 (32/64-bit) |
| Digital I/O lines | 1 input, opto-isolated, line 0; 1 output, opto-isolated, line 1; 1 bidirectional line, non-isolated, line 2 |
| Digital I/O connector | P7 6-pin |
| Power supply | 9…24 V |
| Power delivery | external power supply |
| Power consumption | 3.41 W (typical) @ DC, supply voltage 12 V |
| Ingress protection | IP30 @ with lens and cables properly installed |
| Working temperature | 0…50 °C |
| Storage temperature | -30…70 °C |
| Humidity | 20…80 % @ non-condensing |
| Dimensions | 44×29×59 mm |
| Weight | 100 g (approx.) |
| Certification | CE, RoHS, KC |
| Camera Link configuration | Base, Medium, Full, 80-bit |
| Pixel clock | 60000000 Hz; 70000000 Hz; 85000000 Hz |
| Reverse image | horizontal, vertical |
| Tap count | 2; 4; 8; 10 |
| Tap geometry | 1X2_1Y, 1X4_1Y, 1X8_1Y, 1X10_1Y |
Documents
Selection and applications
High-rate color inspection of moving labels. Color and geometry checks on printed material. Triggered assembly verification at 140 fps.
Minimum kit: MV-CH050-10CC, a 2/3-inch C-mount lens, an SDR Camera Link cable, and a 9 V DC to 24 V DC supply form the minimum imaging set.
Nearby in the range: MV-CH050-10UC V4.0 — Prefer it for 2448 × 2048 color output at 74.1 fps through USB 3.0; MV-CH050-90TC-C-NF — Prefer it for 2448 × 2048 color output at 163.4 fps through 10 Gigabit Ethernet.
Cables and accessories for this model
Compatibility per manufacturer data.
- Data cables
- Camera Link
- I/O & power cables
- Hirose 6-pin IO
- Power
- Power
- Mounting
- Camera mounts
FAQ
Which lens format matches the IMX250 sensor in MV-CH050-10CC?
Use a C-mount lens that covers the camera's 2/3-inch sensor. The optical system should resolve 3.45 µm × 3.45 µm pixels across 2432 × 2048 and preserve the color detail needed by the inspection.
What acquisition connection carries the 140 fps color output?
The camera uses Camera Link with an SDR interface and produces up to 140 fps at 2432 × 2048. A matching Camera Link receiving path and SDR cable are therefore part of the imaging chain.
How does the global shutter help with printed or moving objects?
The global shutter exposes the full sensor at once, avoiding the geometric skew associated with sequential row exposure. Together with the 140 fps rate, it supports color and shape checks on moving labels, print and components.
What power and I/O wiring does MV-CH050-10CC require?
Power must be supplied at 9 V DC to 24 V DC; typical consumption is 3.41 W at 12 V DC. The 6-pin P7 connector also carries one isolated input, one isolated output and one bidirectional non-isolated I/O line.
What enclosure and operating-temperature limits apply here?
The working range is 0 °C to 50 °C with 20% to 80% RH and no condensation. IP30 applies when the lens and wiring are fitted correctly, so additional environmental protection depends on the installation conditions.