Area camera · CH Series
Hikrobot MV-CH1030-90TM-M58S-NN
- Warranty
- 36 months
Global-shutter detail over 10 Gigabit Ethernet
A 103.6 MP monochrome image with global exposure is the central capability of MV-CH1030-90TM-M58S-NN. Its Gpixel GMAX32103 sensor produces 11264 × 9200 Mono 8 at 11 fps, using 3.2 µm pixels across a 46.6 mm format. A 10 Gigabit Ethernet interface carries the stream for large-area measurement and defect analysis without dividing the target into several images.
The global shutter supports geometric inspection when the object moves between frames, while exposure from 20 µs to 10 sec covers brief capture and long integration. The M58 × 0.75 mount serves the large sensor. A 12-pin P10 connection supplies isolated input and output, a bidirectional I/O line and RS-232 for trigger and illumination coordination.
MV-CH1030-90YM-M58S-NN retains the GMAX32103, 11264 × 9200 global-shutter image and M58 mount but reaches 24.3 fps over CoaXPress. MV-CH1010-10CM-M72-TF provides 11648 × 8740 at 8.1 fps through Camera Link, using a 55 mm rolling-shutter IMX461 and M72 mount. Choose this model for 103.6 MP global-shutter capture over 10 Gigabit Ethernet.
Specifications
| Product type | 103.6 MP 10 GigE Area Scan Camera |
| Sensor type | CMOS, global shutter |
| Sensor model | Gpixel GMAX32103 |
| Sensor format | 46.6 mm |
| Resolution | 11264 × 9200 |
| Pixel size | 3.2 µm × 3.2 µm |
| Maximum frame rate | 11 fps @ 11264 × 9200 Mono 8 |
| Mono color | Mono |
| Dynamic range | 64.86 dB |
| Exposure time | 20 μs to 10 sec |
| Gain | 1.4 × to 5.2 × |
| Data interface | 10 Gigabit Ethernet (10000 Mbit/s), compatible with Gigabit Ethernet (1000 Mbit/s) |
| Digital I/O | 12-pin P10 connector provides power and I/O, including opto-isolated input × 1 (Line 0), opto -isolated output × 1 (Line 1), bi-directional non-isolated I/O × 1 (Line 2), and RS-232 × 1 |
| Lens mount | M58 × 0.75 |
| Power supply | 12 VDC to 24 VDC |
| Power consumption | Typ. 12.6 W @ 12 VDC |
| Ingress protection | IP40 (under proper lens installation and wiring) |
| Operating temperature | 0 °C to 50 °C (32 °F to 122 °F) |
| Storage temperature | –30 °C to 70 °C (–22 °F to 158 °F) |
| Humidity | 20% RH to 95% RH (no condensation) |
| Dimensions | 84 mm × 84 mm × 92.5 mm (3.3″ × 3.3″ × 3.6″) |
| Weight | Approx. 738 g (1.6 lb.) |
| Certification | CE-EMC, KC |
| Compatibility | GigE Vision V2.0, GenICam |
| Cooling | Without fan or heat sink |
Selection and applications
Large-area monochrome defect inspection. Global-shutter measurement of detailed objects. Triggered 103.6 MP surface capture.
Minimum kit: MV-CH1030-90TM-M58S-NN, a 46.6 mm-format M58 × 0.75 lens, a 10 Gigabit Ethernet cable, and a 12 V DC to 24 V DC supply form the minimum imaging set.
Nearby in the range: MV-CH1030-90YM-M58S-NN — Prefer it for the same 11264 × 9200 global-shutter image at 24.3 fps over CoaXPress.; MV-CH1010-10CM-M72-TF — Prefer it for a 11648 × 8740 IMX461 image, M72 mount and Camera Link interface..
Cables and accessories for this model
Compatibility per manufacturer data.
- I/O & power cables
- 12-pin IO
- Power
- Power
- Mounting
- Camera mounts
FAQ
What image stream is carried by the 10 Gigabit Ethernet link?
The camera sends 11264 × 9200 Mono 8 at up to 11 fps. Its interface operates at 10000 Mbit/s and is listed as compatible with 1000 Mbit/s Gigabit Ethernet, so the acquisition rate must match the active link.
Why is a global shutter significant for a 103.6 MP image?
The GMAX32103 exposes the full 11264 × 9200 image simultaneously. That timing supports geometry, registration and surface-detail checks when a large object moves between frames rather than remaining continuously stationary.
What lens mount covers the large GMAX32103 sensor?
The camera uses an M58 × 0.75 mount and lists a 46.6 mm sensor format with 3.2 µm pixels. The selected lens must cover that image area and resolve the full 11264 × 9200 monochrome frame.
What supply and thermal load should the installation support?
Input power is 12 V DC to 24 V DC, with typical consumption of 12.6 W at 12 V DC. Cooling is listed as without a fan or heat sink, and the permitted working interval is 0 °C to 50 °C.
Which external timing signals are available on the camera?
The 12-pin P10 connector provides one opto-isolated input, one opto-isolated output, one bidirectional non-isolated I/O line and one RS-232 channel for acquisition and peripheral timing.