Area camera · CH Series
Hikrobot MV-CH1030-90YM-M58S-NN
- Lead time
- from 5 days
- Warranty
- 36 months
CoaXPress throughput for 103.6 MP
Full-frame 103.6 MP acquisition at 24.3 fps gives MV-CH1030-90YM-M58S-NN its role in large-area inspection. The monochrome Gpixel GMAX32103 sensor produces 11264 × 9200 with 3.2 µm pixels and a global shutter. CoaXPress with a Micro-BNC interface carries the stream for detailed measurements and surface analysis at a higher rate than the networked member of the same platform.
Simultaneous global exposure supports geometric checks on large targets that move between frames. The active sensor area is 36.1 mm × 29.4 mm, paired with an M58 × 0.75 lens mount. The 84 mm × 84 mm × 92.5 mm body is specified without a fan or heat sink, defining a compact mechanical package for this resolution class.
MV-CH1030-90TM-M58S-NN uses the same GMAX32103, 11264 × 9200 image and M58 mount but delivers 11 fps through 10 Gigabit Ethernet. MV-CH1010-10CM-M72-TF supplies a wider 11648 × 8740 rolling-shutter image at 8.1 fps over Camera Link with an M72 mount. Select the 90YM model when 24.3 fps, global shutter and Micro-BNC CoaXPress are the main requirements.
Specifications
| Shutter | global |
| Sensor model | Gpixel GMAX32103 |
| Sensor resolution | 11264×9200 px |
| Maximum frame rate | 24.3 fps @ Mono8, resolution 11264×9200 px |
| Color mode | mono |
| Lens mount | M58×0.75 |
| Data interface | CoaXPress; RS-232 |
| Sensor technology | CMOS |
| Pixel size | 3.2×3.2 µm |
| Dynamic range | 63.7 dB |
| Signal-to-noise ratio | 39.9 dB |
| Exposure time | 20…10000000 µs |
| Auto exposure | Auto, Off, Once |
| Linear gain factor | 1.4…5.2 |
| Pixel format | Mono8, Mono10, Mono12 |
| Binning | 1x1, 1x2, 1x4, 2x1, 2x2, 2x4, 4x1, 4x2, 4x4 |
| Decimation | 1x1, 1x2, 1x4, 2x1, 2x2, 2x4, 4x1, 4x2, 4x4 |
| Flange focal distance | 11.33…11.53 mm |
| Data interface connector | Micro-BNC |
| Protocol compatibility | CoaXPress, GenICam |
| Third party software protocol | CoaXPress |
| Client software | MVS |
| Operating systems | Windows 7 (32-bit), Windows 10 (32-bit), Windows 11 (64-bit), Linux (32/64-bit) |
| Digital I/O lines | 1 input, opto-isolated, line 0; 1 output, opto-isolated, line 1; 1 bidirectional line, non-isolated, line 2 |
| Digital input count | 1 |
| Digital output count | 1 |
| Digital I/O connector | P10 12-pin |
| Power supply | 12…24 V |
| Power delivery | external power supply; PoCXP @ ports CXP-0, CXP-1 |
| Power consumption | 10.4 W (typical) @ DC, supply voltage 24 V |
| Cooling | natural cooling |
| Ingress protection | IP40 @ with lens and cables properly installed |
| Working temperature | 0…45 °C |
| Storage temperature | -30…80 °C |
| Humidity | 20…95 % @ non-condensing |
| Dimensions | 84×84×92.5 mm |
| Weight | 650 g (approx.) |
| Certification | CE, RoHS, KC |
| Physical sensor dimensions | 36.1×29.4 mm |
| PoCXP support | yes |
| Port inventory | RS-232 (serial), CoaXPress CXP-12 ×4 (data) |
| Reverse image | horizontal, vertical |
Selection and applications
High-throughput inspection of very large images. Global-shutter geometry checks on large targets. Monochrome surface analysis at 24.3 fps.
Minimum kit: MV-CH1030-90YM-M58S-NN, an M58 × 0.75 lens covering 36.1 mm × 29.4 mm, and a Micro-BNC CoaXPress cable form the documented imaging set.
Nearby in the range: MV-CH1030-90TM-M58S-NN — Choose it for the same 11264 × 9200 global-shutter image at 11 fps over 10 Gigabit Ethernet; MV-CH1010-10CM-M72-TF — Choose it for a 11648 × 8740 rolling-shutter IMX461 image over Camera Link.
Cables and accessories for this model
Compatibility per manufacturer data.
- Data cables
- CoaXPress
- Power
- Power
- Mounting
- Camera mounts
FAQ
What full-frame rate is listed for the 103.6 MP CXP model?
MV-CH1030-90YM-M58S-NN reaches 24.3 fps at 11264 × 9200. The output is monochrome and travels through CoaXPress with a Micro-BNC interface, pairing very high pixel count with global exposure.
How does the global shutter support large-object measurement?
The GMAX32103 exposes the complete 11264 × 9200 image simultaneously. This avoids row-by-row timing offsets when geometry or feature position is evaluated on an object moving between acquisitions.
What sensor area must an M58 lens cover on this camera?
The active sensor area is listed as 36.1 mm × 29.4 mm, with 3.2 µm pixels. A lens attached through the M58 × 0.75 mount must illuminate that area and resolve the required detail.
What mechanical envelope and cooling arrangement are specified?
The housing measures 84 mm × 84 mm × 92.5 mm. Cooling is specified without a fan or heat sink, so the installation should preserve the intended body mounting and surrounding airflow.
How does this variant differ from MV-CH1030-90TM-M58S-NN?
Both use the GMAX32103, 11264 × 9200 Mono output, global shutter and M58 × 0.75 mount. The 90YM model reaches 24.3 fps over CoaXPress, while the 90TM model reaches 11 fps over 10 Gigabit Ethernet.