Area camera · CH Series
Hikrobot MV-CH120-15TM-M58S-NF
- Warranty
- 36 months
Where this model fits
Mono acquisition at 68.3 fps across a 4096 × 3000 frame is the defining capability of this 12.3 MP camera. The 1.1-inch Sony® IMX253 uses 3.45 µm pixels and a global shutter, while 10 Gigabit Ethernet carries the full-resolution stream. Exposure can be set from 2 µs in UltraShort mode through 10 sec in standard mode. An M58 × 0.75 lens interface, active fan cooling and a 74 mm square frontal profile make this a large-body high-throughput configuration.
This combination is suited to edge, shape and surface checks on moving material where colour information is not part of the decision. Short simultaneous exposure limits geometric skew, and 68.3 fps provides successive views of fast handling or indexing. The 12-pin P10 connector exposes an isolated trigger input and output, a bidirectional non-isolated line and RS-232. Data uses the 10 Gigabit Ethernet port, while camera power comes from a 9 VDC to 24 VDC source.
MV-CH120-15TM-M58S-NF is the mono member of the M58-mounted Sony® IMX253 pair; MV-CH120-15TC-M58S-NF changes the output to colour without changing the 4096 × 3000 frame or 68.3 fps ceiling. MV-CH120-60TM-C-NF retains mono output but changes to a Stacked BSI sensor, C-mount and 80 fps. MV-CH120-40XM-M58S-NN also accepts M58 × 0.75 optics, yet its 22.5 mm × 16.9 mm sensor and CoaXPress interface serve the 188 fps operating point.
Specifications
| Product type | 12.3 MP 10 GigE Area Scan Camera |
| Sensor type | CMOS, global shutter |
| Sensor model | Sony® IMX253 |
| Sensor format | 1.1″ |
| Resolution | 4096 × 3000 |
| Pixel size | 3.45 μm × 3.45 μm |
| Maximum frame rate | 68.3 fps @ 4096 × 3000 |
| Mono color | Mono |
| Dynamic range | 71.6 dB |
| Exposure time | UltraShort exposure mode: 2 μs to 14 μs Standard exposure mode: 15 μs to 10 sec |
| Gain | 0 dB to 18 dB |
| Data interface | 10 Gigabit Ethernet (10000 Mbit/s), compatible with Gigabit Ethernet (1000 Mbit/s) |
| Digital I/O | 12-pin P10 connector provides power and I/O, including opto-isolated input × 1 (Line 0), opto-isolated output × 1 (Line 1), bi -directional non-isolated I/O × 1 (Line 2), RS -232 × 1 |
| Lens mount | M58 × 0.75 |
| Power supply | 9 VDC to 24 VDC |
| Power consumption | Typ. 9.6 W @ 24 VDC |
| Ingress protection | IP40 (under proper lens installation and wiring) |
| Operating temperature | 0 °C to 50 °C (32 °F to 122 °F) |
| Storage temperature | –30 °C to 70 °C (–22 °F to 158 °F) |
| Humidity | 20% RH to 95% RH (no condensation) |
| Dimensions | 74 mm × 74 mm × 72.4 mm (2.9″ × 2.9″ × 2.9″) |
| Weight | Approx. 550 g (1.2 lb) |
| Certification | CE-EMC, KC |
| Compatibility | GigE Vision V2.0, GenICam |
| Cooling | With fan |
Selection and applications
Mono edge measurement on moving material. 68.3 fps surface inspection at 4096 × 3000. Triggered capture with 2 µs UltraShort exposure.
Minimum kit: MV-CH120-15TM-M58S-NF, an M58 × 0.75 lens, a 10 Gigabit Ethernet cable and a 9 VDC to 24 VDC supply provide the minimum imaging chain.
Nearby in the range: MV-CH120-15TC-M58S-NF — Select it when the same Sony® IMX253 platform must record colour.; MV-CH120-60TM-C-NF — Select it for mono 4096 × 3072 capture at 80 fps with C-mount optics..
Cables and accessories for this model
Compatibility per manufacturer data.
- I/O & power cables
- 12-pin IO
- Power
- Power
- Mounting
- Camera mounts
FAQ
Why select the mono member of the Sony® IMX253 pair?
MV-CH120-15TM-M58S-NF produces mono output from the 1.1-inch Sony® IMX253 at 4096 × 3000. Its colour counterpart is MV-CH120-15TC-M58S-NF; both reach 68.3 fps and use the same M58 × 0.75 mounting thread.
Does the Ethernet interface also provide camera power?
The camera takes 9 VDC to 24 VDC through the 12-pin P10 connection, with typical consumption of 9.6 W at 24 VDC. The separate data path is 10 Gigabit Ethernet at 10000 Mbit/s, with compatibility for Gigabit Ethernet at 1000 Mbit/s.
What exposure controls are available for high-speed measurement?
UltraShort mode covers 2 µs to 14 µs, and standard mode covers 15 µs to 10 sec. Together with the global shutter, the short end supports measurement of moving edges, provided the scene supplies enough light during the exposure.
Can this camera operate through an existing Gigabit Ethernet link?
The interface is compatible with Gigabit Ethernet at 1000 Mbit/s as well as its native 10000 Mbit/s link. Full 4096 × 3000 output at 68.3 fps is associated with 10 Gigabit Ethernet; the lower-rate link has less transport capacity.
What installation envelope should be reserved around the mono camera?
The body measures 74 mm × 74 mm × 72.4 mm, weighs approximately 550 g and includes a fan. Operation is specified from 0 °C to 50 °C with IP40 protection after correct lens installation and wiring.