Area camera · CH Series

Hikrobot MV-CH120-90Y2M-C-NN

4096 × 3008Gpixel GMAX3412149 fps @ 4096 × 3008 Mono 8CoaXPress with Micro-BNC interfacesIP40
Price on requestAn engineer will confirm pricing and lead time in the first reply.
Warranty
36 months
Find the right model
Hikrobot MV-CH120-90Y2M-C-NN

Highest-rate mono application

A 149 fps Mono 8 stream at 4096 × 3008 makes MV-CH120-90Y2M-C-NN the highest-rate 1.1-inch Gpixel implementation in the lineup. The 12.3 MP GMAX3412 uses 3.4 µm pixels, a global shutter and a 59.8 dB dynamic range. CoaXPress with Micro-BNC interfaces transports the frames, while the optical attachment is C-mount. The 50 mm × 50 mm × 45 mm body weighs approximately 207 g and requires neither a fan nor a heat sink.

This mono configuration is suited to rapid edge measurement, brief mechanical-state capture and contrast-based surface inspection where 149 observations per second are required. Exposure can be set from 6 µs to 10 sec, with global timing preserving geometry across a moving frame. A 12-pin P10 connector adds isolated trigger input and output, a bidirectional line and RS-232. CXP-0 supports PoCXP; external 9 VDC to 24 VDC is another supply route, with typical use of 6.1 W at 12 VDC.

MV-CH120-90Y2M-C-NN trades a 4096 × 3008 frame for the 149 fps ceiling. MV-CH120-90Y1M-NN uses the same Gpixel sensor, Mono 8, C-mount and Micro-BNC but records 4096 × 3072 at 93.9 fps in a 29 mm × 29 mm × 42 mm body. MV-CH120-90X2M-C-NN also provides the taller 3072-pixel frame at 95 fps through CoaXPress DIN. MV-CH120-40XM-M58S-NN goes faster at 188 fps with a larger 22.5 mm × 16.9 mm sensor and M58 × 0.75 mount.

Specifications

Product type12.3 MP CoaXPress Area Scan Camera
Sensor typeCMOS, global shutter
Sensor modelGpixel GMAX3412
Sensor format1.1″
Resolution4096 × 3008
Pixel size3.4 µm × 3.4 µm
Maximum frame rate149 fps @ 4096 × 3008 Mono 8
Mono colorMono
Dynamic range59.8 dB
Exposure time6 μs to 10 sec
Gain0 dB to 6.1 dB
Data interfaceCoaXPress with Micro-BNC interfaces
Digital I/O12-pin P10 connector provides power and I/O, including opto-isolated input × 1 (Line 0), opto-isolated output × 1 (Line 1), bi-directional non-isolated I/O × 1 (Line 2), and RS-232 × 1.
Lens mountC-mount
Power supply9 VDC to 24 VDC, CXP-0 supports PoCXP
Power consumptionTyp. 6.1 W @ 12 VDC
Ingress protectionIP40 (under proper lens installation and wiring)
Operating temperature0 °C to 50 °C (32 °F to 122 °F)
Storage temperature–30 °C to 80 °C (–22 °F to 176 °F)
Humidity20% RH to 95% RH (no condensation)
Dimensions50 mm × 50 mm × 45 mm (2.0″ × 2.0″ × 1.8″)
WeightApprox. 207 g (0.5 lb.)
CertificationCE-EMC, KC, UL
CompatibilityCoaXPress, GenICam
CoolingWithout fan or heat sink

Selection and applications

149 fps mono edge measurement. Rapid 4096 × 3008 surface-event capture. 6 µs global-shutter imaging through CoaXPress.

Minimum kit: MV-CH120-90Y2M-C-NN, a C-mount lens, Micro-BNC CoaXPress cabling and PoCXP on CXP-0 or a 9 VDC to 24 VDC source form the minimum acquisition chain.

Nearby in the range: MV-CH120-90Y1M-NN — Select it for a taller 4096 × 3072 Mono 8 frame at 93.9 fps.; MV-CH120-40XM-M58S-NN — Select it for 188 fps at 4096 × 3072 with an M58 × 0.75 mount..

Cables and accessories for this model

Compatibility per manufacturer data.

Data cables
CoaXPress
I/O & power cables
12-pin IO
Power
Power

All accessory families →

FAQ

Which resolution is paired with the 149 fps mono rate?

MV-CH120-90Y2M-C-NN outputs 4096 × 3008 Mono 8 at up to 149 fps. The 1.1-inch Gpixel GMAX3412 has 3.4 µm × 3.4 µm pixels, a global shutter and C-mount optics.

What must connect to the Micro-BNC image interfaces?

The camera's data path is CoaXPress with Micro-BNC interfaces. The receiving CoaXPress hardware and its cabling must carry the stated 4096 × 3008 Mono 8 stream at 149 fps.

Which power routes and typical draw are specified?

PoCXP is supported on CXP-0, and an external 9 VDC to 24 VDC supply can also feed the camera through P10. Typical consumption for this camera is 6.1 W at 12 VDC.

How short can a globally exposed high-speed frame be?

Exposure begins at 6 µs and extends to 10 sec. The global shutter captures all 4096 × 3008 pixels in the same interval, supporting moving-edge geometry when the scene is sufficiently illuminated.

When should the 93.9 fps Y1 mono model be preferred?

MV-CH120-90Y1M-NN is the alternative when a taller 4096 × 3072 frame is required and 93.9 fps is sufficient. It also reduces the enclosure from 50 mm × 50 mm × 45 mm to 29 mm × 29 mm × 42 mm.

Typical applications