Hikrobot MV-CH120-40XM-M58S-NN

High-speed role in the range

Full-frame 4096 × 3072 mono acquisition at 188 fps places MV-CH120-40XM-M58S-NN at the highest temporal rate in this group. The global-shutter AMS CMV12000 spans 22.5 mm × 16.9 mm with 5.5 µm pixels, producing 12.6 MP frames for a CoaXPress link with DIN interfaces. The optical connection is M58 × 0.75 rather than C-mount. Its 60 mm × 60 mm × 59 mm body has no fan or heat sink, with optional heat-sink fins listed for the enclosure.

The camera addresses rapid mono measurement, repeated position checks and surface-event capture where both a wide pixel grid and dense temporal sampling are required. A 20 µs minimum exposure and global shutter allow a moving scene to be frozen when illumination supports that interval. CoaXPress carries the image stream to the receiving hardware, while the P10 connector supplies an isolated input, isolated output, bidirectional line and RS-232. CXP-1 and CXP-2 support PoCXP; external input is 12 VDC to 24 VDC.

Select this model for the 188 fps combination and the larger 22.5 mm × 16.9 mm sensor. MV-CH120-90Y2M-C-NN reaches 149 fps at 4096 × 3008 with a 1.1-inch Gpixel GMAX3412, C-mount and Micro-BNC interfaces. MV-CH120-90X2M-C-NN provides 95 fps at 4096 × 3072 through CoaXPress DIN but uses the smaller 1.1-inch format. MV-CH120-15TM-M58S-NF shares the M58 × 0.75 thread and 4096-pixel width, then uses 10 Gigabit Ethernet at 68.3 fps.

Specifications

Selection and applications

188 fps mono capture of rapid events. Global-shutter measurement with 20 µs exposure. 4096 × 3072 CoaXPress surface inspection.

Minimum kit: MV-CH120-40XM-M58S-NN, an M58 × 0.75 lens, CoaXPress DIN cabling and either PoCXP on CXP-1 or CXP-2 or a 12 VDC to 24 VDC supply form the minimum system.

Nearby in the range: MV-CH120-90Y2M-C-NN — Prefer it for 149 fps mono capture with a 1.1-inch sensor and C-mount.; MV-CH120-90X2M-C-NN — Prefer it for 4096 × 3072 Mono 8 at 95 fps through CoaXPress DIN..

Cables and accessories for this model

Compatibility per manufacturer data.

Data cables

CoaXPress

I/O & power cables

12-pin IO

Power

Power

Mounting

Camera mounts

All accessory families →

FAQ

What lens mount is required for the 22.5 mm × 16.9 mm sensor?

The optical interface is M58 × 0.75. The AMS CMV12000 imaging area is 22.5 mm × 16.9 mm with 5.5 µm pixels, so the lens must match that mount and cover this larger rectangular sensor area.

What acquisition path supports 188 fps at 4096 × 3072?

The camera outputs Mono 8 through CoaXPress with DIN interfaces. Its maximum frame rate is 188 fps at 4096 × 3072, so the receiving CoaXPress hardware and data path must be configured for that full image stream.

Can power be delivered over the CoaXPress connection?

CXP-1 and CXP-2 are specified to support PoCXP. The alternative external supply range is 12 VDC to 24 VDC, and typical consumption is 11.6 W at 12 VDC through the camera's power arrangement.

How does the shutter support analysis of very fast motion?

The AMS CMV12000 has a global shutter and exposure can begin at 20 µs, extending to 10 sec. The simultaneous exposure preserves object geometry, while the short setting limits the distance a moving feature travels during the frame.

What thermal and ambient limits apply at the maximum-rate installation?

The standard body is listed without a fan or heat sink, although optional heat-sink fins are noted. Operation is specified from 0 °C to 30 °C, with IP40 protection after correct lens installation and wiring.