Hikrobot MV-CH1510-11XM-M72-TF

Imaging role and neighbouring models

Thermally managed, very-high-resolution monochrome acquisition defines this Sony IMX411 implementation. The camera records 14208 × 10640 pixels at up to 6.2 fps, with 3.76 × 3.76 µm pixels, 78.7 dB dynamic range and a rolling shutter. CoaXPress output uses a DIN interface, while the power figures distinguish non-cooling and cooling operation.

Use it for repeated capture of stationary patterns, dimensional features or broad surfaces where a 151 MP-class image can reduce the need for multiple views. The selectable 15 µs to 10 sec exposure range accommodates short illuminated captures as well as long integrations. Its M72*0.75 interface and 19.55 mm flange-back length set the mechanical basis for the optical assembly.

MV-CH1510-10XM-M72-NF provides the same IMX411 resolution and 6.2 fps rate in a smaller 100 × 100 × 74.3 mm, 18 W body. This model is 120 × 120 × 84.6 mm and lists 21 W without cooling or 55 W with cooling at 24 V DC. For more sampling and throughput, MV-CH2450-10YM-M72-TF reaches 19200 × 12800 at 12.4 fps; for global exposure over Ethernet, MV-CH1520-90GM-M72-NN is the corresponding M72 choice.

Documents

Selection and applications

Repeated high-resolution monochrome capture. Static geometry inspection with cooling. Long-exposure surface imaging.

Minimum kit: Pair the camera with an M72*0.75 lens, a DIN-interface CoaXPress cable and a 24 V DC power supply sized for the selected cooling mode.

Nearby in the range: MV-CH1510-10XM-M72-NF — Choose it for the same sensor and frame rate in a 100 × 100 × 74.3 mm body drawing 18 W; MV-CH2450-10YM-M72-TF — Choose it when 19200 × 12800 output at 12.4 fps is the priority; MV-CH1520-90GM-M72-NN — Choose it when global-shutter capture and Gigabit Ethernet are required on an M72 body.

Cables and accessories for this model

Compatibility per manufacturer data.

Data cables

CoaXPress

I/O & power cables

12-pin IO

Power

Power

Mounting

Camera mounts

All accessory families →

FAQ

Which optics fit the M72 interface of the cooled CH151 body?

Use an M72*0.75 lens and account for the specified 19.55 mm flange-back length. The optic must cover the 14208 × 10640 sensor area and resolve 3.76 × 3.76 µm sampling; neither C-mount nor M58 is the native mechanical interface.

How should power be sized for cooling and non-cooling operation?

This variant requires 24 V DC. Consumption is listed as 21 W in non-cooling operation and 55 W in cooling operation at 24 V DC. Size the supply and wiring for the selected thermal mode rather than using the lower operating figure for every condition.

Is this camera suited to objects moving during exposure?

The IMX411 is a rolling-shutter sensor, so stationary targets or synchronized illumination are appropriate when shape must be preserved. Exposure is adjustable from 15 µs to 10 sec, but a shorter setting does not change the row-sequential shutter architecture.

What data and trigger connections are available on this variant?

Images leave through CoaXPress with a DIN interface. A separate 12-pin P10 connection provides one opto-isolated input, one opto-isolated output, one bidirectional non-isolated I/O and one RS-232 channel for timing and external control.

What mechanical and ambient conditions should the installation allow?

The housing measures 120 × 120 × 84.6 mm and weighs 1.9 kg. Operation is listed for 0 to 50 °C and 20 to 95 % RH, with an IP40 rating. The mount should therefore carry the camera and M72 optic without relying on the enclosure as protection from liquid ingress.